FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Generic / No Brand

3mm Solder Wick - 1.5m

WREKD General

Desoldering wick is a copper braid used in the rework and repair of printed circuit boards, computers, cell phones or other electronics. Desoldering wick lets you easily remove the extra solder from components or pads on the circuit board. Just press the braid onto the connection with a hot iron and the solder wicks up into the braid.
Check out all our soldering equipment and tools &ampamp building supplies ! 
Specifications

Oxygen free copper
Length: 1.5m
Width: 3mm

Includes

1x Solder Wick - 1.5m


Desoldering wick is a copper braid used in the rework and repair of printed circuit boards, computers, cell phones or other electronics. Desoldering wick lets you easily remove the extra solder from components or pads on the circuit board. Just press the braid onto the connection with a hot iron and the solder wicks up

3mm Solder Wick - 1.5m from WREKD Co.

FPVELITE

Desoldering wick is a copper braid used in the rework and repair of printed circuit boards, computers, cell phones or other electronics. Desoldering wick lets you easily remove the extra solder from components or pads on the circuit board. Just press the braid onto the connection with a hot iron and the solder wicks up into the braid.
Check out all our soldering equipment and tools &amp building supplies ! 
Specifications

Oxygen free copper
Length: 1.5m
Width: 3mm

Includes

1x Solder Wick - 1.5m


Tool Type

Tools

NewBeeDrone

NewBeeDrone NO BIG DEAL Conformal Coating

Apply this to your electronic circuitry to protect against moisture, dust, chemicals, and temperature extremes.

NewBeeDrone NO BIG DEAL Conformal Coating from WREKD Co.

NewBeeDrone NO BIG DEAL Solder Flux

NewBeeDrone NO BIG DEAL Solder Flux
The NewBeeDrone No BIG DEAL Solder Flux helps your soldering processes by removing oxide films which form on the surface of metals being soldered. It increases the wetting ability of the solder, causing it to flow more uniformly over surfaces without balling-up (dewetting) to get a cleaner and even solder job.

NewBeeDrone NO BIG DEAL Solder Flux The NewBeeDrone No BIG DEAL Solder Flux helps your soldering processes by removing oxide films which form on the surface of metals being soldered. It increases the wetting ability of the solder, causing it to flow more uniformly over surfaces without balling-up (dewetting) to get a c

NewBeeDrone NO BIG DEAL Solder Flux from WREKD Co.

RDQ Reverse Tweezers

DTNTECH

Stainless steel reverse tweezers, an essential tool for any quad building enthusiast.
Check out our other tools and building supplies!
Includes

1x RDQ Reverse Tweezers


Stainless steel reverse tweezers, an essential tool for any quad building enthusiast. Check out our other tools and building supplies! Includes 1x RDQ Reverse Tweezers

RDQ Reverse Tweezers from WREKD Co.

Mini All-In-One Hex Driver Tool

The RDQ AIO Driver has a little brother! It may not be as flashy, but this version includes your most important hex drivers in the same magnetic seating and free spinning end cap style that makes its big brother so enjoyable to use. At this price, the Mini AIO Driver Tool really is an essential piece of any compact field kit. 
Check out all of our tools and building supplies!
Features

Precision machined hex drivers fit securely in screw heads to avoid stripping.
Magnets in the end cap and main slot retain bits easily
Super compact

Specifications

1.5mm Hex Driver

2.0mm Hex Driver

2.5mm Hex Driver

3.0mm Hex Driver
Dimensions: 107x19mm
Weight: 51g

Includes

1x Mini All-In-One Hex Driver Tool


Get the perfect Mini All-In-One Hex Driver Tool from RaceDayQuads! Well priced, magnetic seating, spinning end cap, and more features make this a must for any field kit.

Mini All-In-One Hex Driver Tool for Sale - RaceDayQuads

The RDQ AIO Driver has a little brother! It may not be as flashy, but this version includes your most important hex drivers in the same magnetic seating and free spinning end cap style that makes its big brother so enjoyable to use. At this price, the Mini AIO Driver Tool really is an essential piece of any compact fie

Mini All-In-One Hex Driver Tool from WREKD Co.

All the HEX sizes you need in one small convenient space friendly package.The handle holds the tips in place thanks to a magnetic head and the spinning plastic top is a plus to make every job easy.Checkout our huge selection of Tools and Building Supplies! Features Precision machined hex drivers fit securely in screw h

Heavy Duty 5 Ply Self-Healing Cutting Work Mat

CHEN

By popular request, we carry this heavy duty A2 size 5-ply self healing mat, for those of you who prefer building on this type of surface instead of our Heat Resistant Silicone Work Mat. Heavy 3mm thick 5 layer laminated PVC sheet material. This one his knife resistant, not heat resistant. 
Check out our ever expanding selection of tools and building supplies!
Specifications

Dimensions: 600x450x3mm (23.6 x 17.7")
Weight: 1.2kg (2.6lbs)

Includes

1x A2 Size Heavy Duty 5 Ply Self Healing Cutting Mat 


We have added the Heavy Duty 5 Ply Self-Healing Cutting Work Mat to our inventory due to popular demand! Cut with confidence on this amazing mat.

Heavy Duty 5 Ply Self-Healing Cutting Work Mat for Sale - RaceDayQuads

WREKD Co.

By popular request, we carry this heavy duty A2 size 5-ply self healing mat, for those of you who prefer building on this type of surface instead of our Heat Resistant Silicone Work Mat. Heavy 3mm thick 5 layer laminated PVC sheet material. This one his knife resistant, not heat resistant. 
Check out our ever expanding selection of tools and building supplies!
Specifications

Dimensions: 600x450x3mm (23.6 x 17.7&quot)
Weight: 1.2kg (2.6lbs)

Includes

1x A2 Size Heavy Duty 5 Ply Self Healing Cutting Mat 


By popular request, we carry this heavy duty A2 size 5-ply self healing mat, for those of you who prefer building on this type of surface instead of our Heat Resistant Silicone Work Mat. Heavy 3mm thick 5 layer laminated PVC sheet material. This one his knife resistant, not heat resistant.  Check out our ever expanding

Heavy Duty 5 Ply Self-Healing Cutting Work Mat from WREKD Co.

RDQ 9 Piece Drone Tool Kit V2

The new and improved RDQ Drone ToolKit! We listened to the community and made some changes to suit the needs of Quad Pilots. We've subbed out the needle nose pliers with bent nose needle nose pliers, the included tweezers are now straight as well as serrated, the wire cutters are now of higher quality and have more of a pronounced tip on them, and to top things off, that the case now features MOLLE snap straps that will allow you to secure it directly to the outside of your RDQ Backpack!
There is a spot for an extra pair of tweezers, fill that spot with the RDQ Reverse Tweezers.
The Hex Driver Set, Single 1.5mm Hex Driver, and Prop Tool are all available separately as well.
Check out the rest of our tools and building supplies!
Includes

1x Custom Case w/ MOLLE snap straps
1x Prop Tool

1x 2.5mm Hex Driver
1x 2.0mm Hex Driver
1x 1.5mm Hex Driver

1x Phillips Screwdriver
1x Bent Nose Pliers
1x Flush Wire Cutters
1x Fine Tip Serrated Tweezers
1x Scissors 


Get all the tools you need in a stylish carrying case with the custom RDQ drone racing tool kit! This 9 piece set has everything to make those quick fixes on race day.

Drone Racing Tool Kit for Sale - 9 Piece RDQ Tool Set

The new and improved RDQ Drone ToolKit! We listened to the community and made some changes to suit the needs of Quad Pilots. We&#39ve subbed out the needle nose pliers with bent nose needle nose pliers, the included tweezers are now straight as well as serrated, the wire cutters are now of higher quality and have more of a pronounced tip on them, and to top things off, that the case now features MOLLE snap straps that will allow you to secure it directly to the outside of your RDQ Backpack!
There is a spot for an extra pair of tweezers, fill that spot with the RDQ Reverse Tweezers.
The Hex Driver Set, Single 1.5mm Hex Driver, and Prop Tool are all available separately as well.
Check out the rest of our tools and building supplies!
Includes

1x Custom Case w/ MOLLE snap straps
1x Prop Tool

1x 2.5mm Hex Driver
1x 2.0mm Hex Driver
1x 1.5mm Hex Driver

1x Phillips Screwdriver
1x Bent Nose Pliers
1x Flush Wire Cutters
1x Fine Tip Serrated Tweezers
1x Scissors 


The new and improved RDQ Drone ToolKit! We listened to the community and made some changes to suit the needs of Quad Pilots. We've subbed out the needle nose pliers with bent nose needle nose pliers, the included tweezers are now straight as well as serrated, the wire cutters are now of higher quality and have more of 

RDQ 9 Piece Drone Tool Kit V2 from WREKD Co.

FPV Worry Free Extreme Waterproofing - 20ml

BRANDANFPV

Product may not be available for international shipping due to customs even if cart allows for checkout.
Eliminate your environmental concerns with the Brandan FPV Worry Free Waterproof Coating! Designed to safeguard your FPV electronics from moisture exposure, this is the perfect solution for when the weather isn't ideal. No need to fret just apply Worry Free conformal coating and continue flying without interruption due to unfavorable conditions or humidity! 
Note: Choose between a kit with accessories or just the 20ml tube
Check out our other building tools and supplies!
Features

Protects FPV Electronics from Moisture
Waterproofing Made Simple
Easy Application







Application Instructions

Tear down all parts so you can easily put Worry-Free FPV on, no need to unsolder.
Clean up all surfaces with an air blower, brush, or cloth to avoid dust, oil, moist or any other things that cover it.
Apply Worry-Free FPV to all components such as flight controller, VTX, camera boards evenly and slowly. Let dry for 15-20 minutes and then continue to add additional coats as needed to ensure all desired surfaces are covered.
To coat FPV camera you can put Worry-Free FPV on camera connector, on camera case especially on connection between case, and FPV camera focus ring
Do not coat wiring harness connectors.
Do one side at a time or wait until Worry-Free FPV is dry then move to the other side.

Important Tips

The application of this product does not guarantee your electronics will be waterproof. Please always allow time to dry (usually 24h) and test to ensure all desired surfaces are covered.
If you cover chips such as a barometer you may lose the functionality of the chip.

Specifications

Color: Clear/Transparent
Material: Silicone
Volume: 20ml

FPV Worry Free Extreme Kit Contents

1x Wooden Application Stick

1x Plastic Application Stick

2x Micro-USB Covers

2x USB-C Covers

1x Medium Brush

1x Toothpick

Includes


1x BrandanFPV FPV Worry Free Extreme Waterproofing - 20ml - Choose your Version 






Product may not be available for international shipping due to customs even if cart allows for checkout. Eliminate your environmental concerns with the Brandan FPV Worry Free Waterproof Coating! Designed to safeguard your FPV electronics from moisture exposure, this is the perfect solution for when the weather isn't id

BrandanFPV FPV Worry Free Extreme Waterproofing - 20ml - Choose your Version

BrandanFPV FPV Worry Free Extreme Waterproofing - 20ml - Choose your V

BrandanFPV

Product may not be available for international shipping due to customs even if cart allows for checkout.
Eliminate your environmental concerns with the Brandan FPV Worry Free Waterproof Coating! Designed to safeguard your FPV electronics from moisture exposure, this is the perfect solution for when the weather isn&#39t ideal. No need to fret just apply Worry Free conformal coating and continue flying without interruption due to unfavorable conditions or humidity! 
Note: Choose between a kit with accessories or just the 20ml tube
Check out our other building tools and supplies!
Features

Protects FPV Electronics from Moisture
Waterproofing Made Simple
Easy Application







Application Instructions

Tear down all parts so you can easily put Worry-Free FPV on, no need to unsolder.
Clean up all surfaces with an air blower, brush, or cloth to avoid dust, oil, moist or any other things that cover it.
Apply Worry-Free FPV to all components such as flight controller, VTX, camera boards evenly and slowly. Let dry for 15-20 minutes and then continue to add additional coats as needed to ensure all desired surfaces are covered.
To coat FPV camera you can put Worry-Free FPV on camera connector, on camera case especially on connection between case, and FPV camera focus ring
Do not coat wiring harness connectors.
Do one side at a time or wait until Worry-Free FPV is dry then move to the other side.

Important Tips

The application of this product does not guarantee your electronics will be waterproof. Please always allow time to dry (usually 24h) and test to ensure all desired surfaces are covered.
If you cover chips such as a barometer you may lose the functionality of the chip.

Specifications

Color: Clear/Transparent
Material: Silicone
Volume: 20ml

FPV Worry Free Extreme Kit Contents

1x Wooden Application Stick

1x Plastic Application Stick

2x Micro-USB Covers

2x USB-C Covers

1x Medium Brush

1x Toothpick

Includes


1x BrandanFPV FPV Worry Free Extreme Waterproofing - 20ml - Choose your Version 






BrandanFPV FPV Worry Free Extreme Waterproofing - 20ml - Choose your Version from WREKD Co.

BetaFPV

BetaFPV ExpressLRS ELRS Recovery Dongle

This ELRS Recovery Dongle is an FTDI USB to TTL module based on the CP2102 bridge controller, which is applied to the firmware upgrade for the ESP32&amp;ESP8XX chip. The ExpressLRS Recovery Dongle is compatible with many ELRS receivers in the market and FPV goggles backpack. It will be a good choice to unbrick the ELRS

BetaFPV ExpressLRS Recovery Dongle

BETAFPV

This ELRS Recovery Dongle is an FTDI USB to TTL module based on the CP2102 bridge controller, which is applied to the firmware upgrade for the ESP32&ampESP8XX chip. The ExpressLRS Recovery Dongle is compatible with many ELRS receivers in the market and FPV goggles backpack. It will be a good choice to unbrick the ELRS receiver when failed in updating or flashing firmware by UART.
Check out our Express LRS collection and all our BetaFPV products! 

Features

Unbrick and recover an ELRS receiver when having a failed update such as missing bootloader
Solder Free! This dongle features spring probe pins for more convenient use
Comes inside of a plastic case that is more durable and portable compared with the naked board version on the market.
USB to Serial chip (CP2102) supports XP, win7 / win8 32bits, 64bits, win10 / 11 32bits, 64bits, Linux, MAC

Specifications

Operating Voltage: 5V
Logic Voltage: 5V
3.3V Power Supply Output Current: 400mA
Pins Output Method: 2x4P-2.54mm pin header
Serial Baud Rate: Up to 921600bps.
USB Connector: USB-C

Includes

1x ExpressLRS Recovery Dongle
1x 4 Pin Cable
1x Probe Converter Board



This ELRS Recovery Dongle is an FTDI USB to TTL module based on the CP2102 bridge controller, which is applied to the firmware upgrade for the ESP32&amp;ESP8XX chip. The ExpressLRS Recovery Dongle is compatible with many ELRS receivers in the market and FPV goggles backpack. It will be a good choice to unbrick the ELRS

This ELRS Recovery Dongle is an FTDI USB to TTL module based on the CP2102 bridge controller, which is applied to the firmware upgrade for the ESP32&ampampESP8XX chip. The ExpressLRS Recovery Dongle is compatible with many ELRS receivers in the market and FPV goggles backpack. It will be a good choice to unbrick the ELRS receiver when failed in updating or flashing firmware by UART.
Check out our Express LRS collection and all our BetaFPV products! 

Features

Unbrick and recover an ELRS receiver when having a failed update such as missing bootloader
Solder Free! This dongle features spring probe pins for more convenient use
Comes inside of a plastic case that is more durable and portable compared with the naked board version on the market.
USB to Serial chip (CP2102) supports XP, win7 / win8 32bits, 64bits, win10 / 11 32bits, 64bits, Linux, MAC

Specifications

Operating Voltage: 5V
Logic Voltage: 5V
3.3V Power Supply Output Current: 400mA
Pins Output Method: 2x4P-2.54mm pin header
Serial Baud Rate: Up to 921600bps.
USB Connector: USB-C

Includes

1x ExpressLRS Recovery Dongle
1x 4 Pin Cable
1x Probe Converter Board



BetaFPV ExpressLRS Recovery Dongle from WREKD Co.

Gemfan

Gemfan Prop Locket T-Mount Prop Tool

GEMFAN

A keychain style tool for removing those stuck in T-Mount props!
Make sure to check out all of our tools and the rest of our GemFan selection!

Includes

1x Gemfan Prop Locket T-Mount Prop Tool


A keychain style tool for removing those stuck in T-Mount props! Make sure to check out all of our tools and the rest of our GemFan selection! Includes 1x Gemfan Prop Locket T-Mount Prop Tool

This Gemfan Prop Locket keychain is designed for easy swapping of T-Mount propellers. 

If you've flown a micro drone with T-Mount propellers you know how painful replacing props can be. This convenient keychain tool makes replacing props a breeze. Simply remove the screws holding the prop to the motor, install two of the provided screws onto the prop halfway, slide the prop tool under the screw heads and

Gemfan Prop Locket - T Mount Propeller Removal Wrench for FPV RC Racing Drone

Gemfan Prop Locket T-Mount Prop Tool from WREKD Co.

Laminating Film by the Foot

LAMINATIONDEPOT

May need to be folded to fit in package.  If you prefer it rolled up and not creased, contact customer support for options.
Quality glossy laminating film cut from a 25-27" wide roll and sold by the foot. (Max section length is 10ft, for handling)
Laminating your foam aircraft parts adds increases impact resistance, rigidity and overall lifespan. Thinner films are recommended for covering compound curves or complex shapes, while the thicker films are great for adding durability to large flat surfaces and leading edges.Check out all our tools and building supplies and our fixed wing hardware selection!
Specifications
Temp Range

1.5Mil: 260-270°F

1.7Mil: 230-250°F

3Mil: 230-250°F

5Mil: 260-270°F

10Mil: 230-250°F


Includes

1'x 25" Wide Laminate Film  

 
 

May need to be folded to fit in package.  If you prefer it rolled up and not creased, contact customer support for options. Quality glossy laminating film cut from a 25-27" wide roll and sold by the foot. (Max section length is 10ft, for handling) Laminating your foam aircraft parts adds increases impact resistance, ri

Laminating Film by the Foot - Choose Your Thickness

Laminating Film by the Foot - Choose Your Thickness - For Sale At RaceDayQuads

May need to be folded to fit in package.  If you prefer it rolled up and not creased, contact customer support for options.
Quality glossy laminating film cut from a 25-27&quot wide roll and sold by the foot. (Max section length is 10ft, for handling)
Laminating your foam aircraft parts adds increases impact resistance, rigidity and overall lifespan. Thinner films are recommended for covering compound curves or complex shapes, while the thicker films are great for adding durability to large flat surfaces and leading edges.Check out all our tools and building supplies and our fixed wing hardware selection!
Specifications
Temp Range

1.5Mil: 260-270°F

1.7Mil: 230-250°F

3Mil: 230-250°F

5Mil: 260-270°F

10Mil: 230-250°F


Includes

1&#39x 25&quot Wide Laminate Film  

 
 

Laminating Film by the Foot - Choose Your Thickness from WREKD Co.

Kotking

Kotking Water Resistant Electronics Coating - 15ml

The Best way to coat your R/C for full Splash proof &amp; electrical short circuit prevention, PLUS retains heat dissipation. * not allowed to import into Mexico Check out all our Flight Controller Accessories! Specifications: Size: 15ml Package Includes: 1 x KOTKING R/C Coating 15ml Why KOTKING? Splash proof &amp; pre

KOTKING R/C Coating 15ml

Kotking is a clear silicone based water resistant coating for electronics. Kotking is water resistant and designed to dissipate heat, it will not melt off during those full throttle punch outs. When applied properly, Kotking will prevent damage from exposure to liquids.
Check out our other building tools and supplies!
Specifications

Color: Clear/transparent
Size: 15mL
Material: Silicone Based

Includes

1x Kotking Water Resistant Electronics Coating - 15ml

Instructions

Tear down all parts so you can easilly put KOTKING on them, no need to unsolder
Clean up all surfaces with air blower, brush, or cloth to avoid dust, oil, moist or any other things that cover it
Apply KOTKING to all components such as flight controller, VTX, camera boards evenly and slowly you can use our tiny brush or wood stick to make them even
put them in balanced potition and let them dry for about 15-20 mins, and you can do the same for the low side later
To coat FPV camera you can put KOTKING on camera connector, on camera case especially on connection between case,and FPV camera focus ring
Do not coat wiring harness connectors
Do one side at a time or until KOTKING dry and you can do the other side


Kotking is a clear silicone based water resistant coating for electronics. Kotking is water resistant and designed to dissipate heat, it will not melt off during those full throttle punch outs. When applied properly, Kotking will prevent damage from exposure to liquids. Check out our other building tools and supplies! 

Kotking Water Resistant Electronics Coating - 15ml from WREKD Co.

KOTKING

KOTKING&nbspis a splashproof R/C Coating that helps protect your electronics from moisture. Prevent electrical short circuits during inclement weather and unexpected FPV landing! This silicone-based coating dissipates heat and is easily removable for all your FPV building needs.

KOTKING is a splashproof R/C Coating that helps protect your electronics from moisture. Prevent electrical short circuits during inclement weather and unexpected FPV landing! This silicone-based coating dissipates heat and is easily removable fo

KOTKING Splashproof R/C Coating for Electronics - 15ml

SpeedyBee

SpeedyBee Adapter 3 - Multi-Function Mobile FPV Tool

The third iteration of the useful SpeedyBee Adapter is the best yet! Configure, charge, check, analyze, flash, you name it, the Adapter 3 probably does it. And all from your smartphone, no need for a laptop! With so many ways to use this tool, it will become standard in your FPV bags. Check out all our FC Adapters and 

SpeedyBee Adapter 3

Speedybee

The best quality First Person View equipment. Free or discounted shipping on all orders.Drone Racing, RC Airplanes, FPV Cameras, FPV Goggles, Video Transmitters, RC Quads, Drone Antennas, Lipo Batteries, and Ground Station Equipment.All available for amateurs, schools, hobbyists, government, and wholesale buyers.

SpeedyBee Adapter 3 - www.readymaderc.com

RUNCAM

This is your mobile FPV swiss army knife! You can flash and configure your FC &amp BLHeli_S ESCs, download and analyze your blackbox logs, check your 1-6S LiPo voltages, and fast charge your mobile device from a LiPo! Featuring WiFi &amp Bluetooth radios, XT60 &amp PH2.0 power inputs and Micro USB, USB-C &amp USB-A connectivity, there's not much this little device can't do! 
Download the App for Android and iOS
Check the rest of our tools &amp building supplies and our SpeedyBee products! 

Features

Wireless Firmware Flasher &amp Configurator
30W Fast USB Charger
Wireless Blackbox Analyser
Wireless ESC Flasher
1-6S LiPo Checker
iOS &amp Android Compatible
USB-C &amp Micro USB

Specifications

Input Voltage: 1-6S(3.8V+ for 1S)
Power Input Connector: XT60-Male, PH2.0 male
Required Mobile Device System Version: Android 7.0+ | iOS 12.0+
Supported SpeedyBee App Version: V1.6.1 + for iOS | V1.5.6+ for Android
Maximum Output Current for flight controllers: 700mA @5V
Fast Charging Output interface: USB A Port
Minimum Input Voltage for Charging output: 7.4V(2S LiPo)
Supported Fast Charging Protocol: QC3.0/QC2.0, AFC, FCP, SCP/High SCP, PE2.0/PE1.1, SFCP
Max Fast Charging Current: 3.5A
Max Fast Charging Power: 30W
Case Material: ABS + PC
Liquid Silicone Cable Length: 12.4cm
Dimension(Main Body): 24.8x21.8x53.6mm
Net Weight: 35g


Manual Download
Includes

1x Speedy Bee Adapter 3


The SpeedyBee Adapter 3 is the perfect multi-function mobile FPV tool for your kit. Take this compact lifesaver everywhere with ease thanks to its small size.

SpeedyBee Adapter 3 - Multi-Function Mobile FPV Tool for Sale

This is your mobile FPV swiss army knife! You can flash and configure your FC &ampamp BLHeli_S ESCs, download and analyze your blackbox logs, check your 1-6S LiPo voltages, and fast charge your mobile device from a LiPo! Featuring WiFi &ampamp Bluetooth radios, XT60 &ampamp PH2.0 power inputs and Micro USB, USB-C &ampamp USB-A connectivity, there&#39s not much this little device can&#39t do! 
Download the App for Android and iOS
Check the rest of our tools &ampamp building supplies and our SpeedyBee products! 

Features

Wireless Firmware Flasher &ampamp Configurator
30W Fast USB Charger
Wireless Blackbox Analyser
Wireless ESC Flasher
1-6S LiPo Checker
iOS &ampamp Android Compatible
USB-C &ampamp Micro USB

Specifications

Input Voltage: 1-6S(3.8V+ for 1S)
Power Input Connector: XT60-Male, PH2.0 male
Required Mobile Device System Version: Android 7.0+ | iOS 12.0+
Supported SpeedyBee App Version: V1.6.1 + for iOS | V1.5.6+ for Android
Maximum Output Current for flight controllers: 700mA @5V
Fast Charging Output interface: USB A Port
Minimum Input Voltage for Charging output: 7.4V(2S LiPo)
Supported Fast Charging Protocol: QC3.0/QC2.0, AFC, FCP, SCP/High SCP, PE2.0/PE1.1, SFCP
Max Fast Charging Current: 3.5A
Max Fast Charging Power: 30W
Case Material: ABS + PC
Liquid Silicone Cable Length: 12.4cm
Dimension(Main Body): 24.8x21.8x53.6mm
Net Weight: 35g


Manual Download
Includes

1x Speedy Bee Adapter 3


This is your mobile FPV swiss army knife! You can flash and configure your FC &amp; BLHeli_S ESCs, download and analyze your blackbox logs, check your 1-6S LiPo voltages, and fast charge your mobile device from a LiPo! Featuring WiFi &amp; Bluetooth radios, XT60 &amp; PH2.0 power inputs and Micro USB, USB-C &amp; USB-A

SpeedyBee Adapter 3 - Multi-Function Mobile FPV Tool from WREKD Co.

The third iteration of the useful SpeedyBee Adapter is the best yet! Configure, charge, check, analyze, flash, you name it, the Adapter 3 probably does it.

SkyRC

SkyRC GSM020 GNSS Performance Analyzer

Track how fast your RC vehicle at any time with this small device that pairs with your smartphone!




The collected data gets transfered to your Phone with the next Blutooth connection.
 GNSS Performance Analyzer (GSM020 allows you to measure and analyze many aspects of your RC car &ampamp airplane&#39s performance using the latest GNSS engine (GPS, GLONASS) which gives you Acceleration, G-force, Speed, Time, Distance, High and Vertical Speed.


Check out all our GPS modules while you&#39re here!


Features


3 different Modes for every opportunity (Drag Race, Track Race, Flying Mode)
Built-in 1M flash (for up to 50 data records)
Built-in rechargeable, LiPo bettery 200mAh (for more than 5 hours)
In the App recorded data turns into useful analysis
GPS Coordinator  
Support both Metric and Imperial system of measurements
Free App is compatible with iOS 9.0 and Android 5.0 (or above)




Specifications


3 Modes : Drag Race/Track Race/Flying Mode
Receiver: L1, 1575.42 MHz
Update frequency: 10 Hz
Antenna: built-in
Sensitivity of satellite signal reception: -167dBm
Operating temperature: 0 ° to + 40 °
Temperature at rest: -10 ° to + 70 °
Operating mode humidity: 5% to 90%
Case Size: 40 x 39 x 16mm 
Weight: 38g

Includes

1x SkyRC GSM020 GNSS Performance Analyzer


Track how fast your RC vehicle at any time with this small device that pairs with your smartphone! The collected data gets transfered to your Phone with the next Blutooth connection.  GNSS Performance Analyzer (GSM020 allows you to measure and analyze many aspects of your RC car &amp; airplane's performance using the l

SkyRC GSM020 GNSS Performance Analyzer from WREKD Co.

Track how fast your RC vehicle at any time with this small device that pairs with your smartphone!




The collected data gets transfered to your Phone with the next Blutooth connection.
 GNSS Performance Analyzer (GSM020 allows you to measure and analyze many aspects of your RC car &amp airplane's performance using the latest GNSS engine (GPS, GLONASS) which gives you Acceleration, G-force, Speed, Time, Distance, High and Vertical Speed.


Check out all our GPS modules while you're here!


Features


3 different Modes for every opportunity (Drag Race, Track Race, Flying Mode)
Built-in 1M flash (for up to 50 data records)
Built-in rechargeable, LiPo bettery 200mAh (for more than 5 hours)
In the App recorded data turns into useful analysis
GPS Coordinator  
Support both Metric and Imperial system of measurements
Free App is compatible with iOS 9.0 and Android 5.0 (or above)




Specifications


3 Modes : Drag Race/Track Race/Flying Mode
Receiver: L1, 1575.42 MHz
Update frequency: 10 Hz
Antenna: built-in
Sensitivity of satellite signal reception: -167dBm
Operating temperature: 0 ° to + 40 °
Temperature at rest: -10 ° to + 70 °
Operating mode humidity: 5% to 90%
Case Size: 40 x 39 x 16mm 
Weight: 38g

Includes

1x SkyRC GSM020 GNSS Performance Analyzer


The SkyRC GSM020 GNSS Performance Analyzer is a small device that tracks the speed of your RC vehicle with ease! Pair with your smartphone and see the speeds you reach today!

SkyRC GSM020 GNSS Performance Analyzer for Sale - RaceDayQuads

Sequre

Sequre SQ-D60B MINI Soldering Iron w/ TS-B2 or TS-D24 Tip

The SQ-D60 is equipped with a SQ-001 soldering iron head and uses TYPE-C power supply, “A section” LED display and “B section” digital tube display. SQ-D60 with humanized functions such as automatic sleep shutdown, induction wake-up, etc., it is a portable intelligent constant temperature electric soldering iron. The o

Sequre SQ-D60 MINI Soldering Iron w/ TS-BC2 Tip

SEQURE

These Irons come equipped with the TS-B2 tip or TS-D24 tip and include an XT60 cable, a barrel to USB-C adapter, and bakelite stand!
SQ-D60B is a portable intelligent constant temperature electric soldering iron featuring smart functions such as automatic sleep shutdown, induction wake-up, etc.
The operation is simple and easy, the temperature rises quickly and stably, and the comfortable round handle is very comfortable to work with. This could be your new favorite iron!Choose TS-B2 tip or TS-D24 tip when ordering. 

We still carry the original TS-100 Soldering Iron!Check out all our soldering equipment and our Sequre gear!
Features

Comfortable Round Grip
LCD Display
Auto Sleep &amp Auto Wake Function

100-400 ℃ Temp Range

The built-in STM32 processor
Dual temperature sensor 
Motion sensor

Over Temp Alarm 

Specifications

Working Temp: 100-400 ℃
Display: LCD
Sleep Time: 1-30min Adjustable
Temperature Compensation: +/- 50℃
Temperature stability range: ± 5 ℃
Temp Unit: ℃
Factory Temp: 300  ℃

Includes

1x Sequre SQ-D60B MINI Soldering Iron
1 x Mainframe
1 x Soldering Iron Tip B2 or D24
1 x Conversion Line
1 x Instruction Manual
1 x Soldering Iron Stand
1 x Hex Key
1 x XT60 Power Cable 



 
 

These Irons come equipped with the TS-B2 tip or TS-D24 tip and include an XT60 cable, a barrel to USB-C adapter, and bakelite stand! SQ-D60B is a portable intelligent constant temperature electric soldering iron featuring smart functions such as automatic sleep shutdown, induction wake-up, etc. The operation is simple 

The SQ-D60B Soldering Iron by SEQURE is an effective portable soldering iron that easily plugs into any lipo battery with a 12-24 voltage power and XT60 connector. 

SEQURE SQ-D60B Mini Soldering Iron w/ TS-D24 Tip

The SEQURE Mini SQ-D60B 60W Mini Soldering Iron Kit with Tool Bag&nbspis the perfect combination that includes all the essential tools&nbspelectronic engineers and FPV enthusiasts need to perform their daily tasks!

The SEQURE Mini SQ-D60B 60W Mini Soldering Iron Kit with Tool Bag is the perfect combination that includes all the essential tools electronic engineers and FPV enthusiasts need to perform their daily tasks!

SEQURE Mini SQ-D60B 60W Mini Soldering Iron Kit w/ Tool Bag

This Soldering Iron kit contains one SQ-D60B Electric Soldering Iron, one 45W PD Power Adapter,4 Replacement Soldering Iron Tips (TS-B2, TS-BC2, TS-D24, TS-I),1 pcs lead-free solder wire, 1 Paste flux, and Tin absorbing wire.

SEQURE Mini SQ-D60B 60W Mini Soldering Iron Kit w/ PD45W Power Adapter

These Irons come equipped with the TS-B2 tip or TS-D24 tip and include an XT60 cable, a barrel to USB-C adapter, and bakelite stand!
SQ-D60B is a portable intelligent constant temperature electric soldering iron featuring smart functions such as automatic sleep shutdown, induction wake-up, etc.
The operation is simple and easy, the temperature rises quickly and stably, and the comfortable round handle is very comfortable to work with. This could be your new favorite iron!Choose TS-B2 tip or TS-D24 tip when ordering. 

We still carry the original TS-100 Soldering Iron!Check out all our soldering equipment and our Sequre gear!
Features

Comfortable Round Grip
LCD Display
Auto Sleep &ampamp Auto Wake Function

100-400 ℃ Temp Range

The built-in STM32 processor
Dual temperature sensor 
Motion sensor

Over Temp Alarm 

Specifications

Working Temp: 100-400 ℃
Display: LCD
Sleep Time: 1-30min Adjustable
Temperature Compensation: +/- 50℃
Temperature stability range: ± 5 ℃
Temp Unit: ℃
Factory Temp: 300  ℃

Includes

1x Sequre SQ-D60B MINI Soldering Iron
1 x Mainframe
1 x Soldering Iron Tip B2 or D24
1 x Conversion Line
1 x Instruction Manual
1 x Soldering Iron Stand
1 x Hex Key
1 x XT60 Power Cable 



 
 

Sequre SQ-D60B MINI Soldering Iron w/ TS-B2 or TS-D24 Tip from WREKD Co.

Sequre TS-C1 Soldering Tip for SQ-001 & TS-100

A replacement TS-C1 solder tip accessory for TS100/ SQ-001/SQ-D60 digital soldering iron.

SEQURE TS-C1 Soldering Tip for TS100/SQ-001 Soldering Iron



Spare replacement soldering tip for the TS-100 and SQ-001 soldering irons.
Check out all our soldering equipment and our Sequre gear!
Features

Ceramics heating core, long life time.
Internal heated design with lead free, fast heating speed.
7 types for your selection, perfect for TS100 and SQ-001 electric soldering iron usage.
It&#39s a internal-heated heating core specially for TS100 and SQ-001, tip and heater as a whole.

Specifications

Material: Ceramic + Steel
Type: TS-C1
Length: Approx. 105mm / 4.13in
Net Weight: Approx. 11g

Includes

1x Sequre TS-C1 Soldering Tip for SQ-001 &ampamp TS-100




Spare replacement soldering tip for the TS-100 and SQ-001 soldering irons. Check out all our soldering equipment and our Sequre gear! Features Ceramics heating core, long life time. Internal heated design with lead free, fast heating speed. 7 types for your selection, perfect for TS100 and SQ-001 electric soldering iro

Sequre TS-C1 Soldering Tip for SQ-001 & TS-100 from WREKD Co.



Spare replacement soldering tip for the TS-100 and SQ-001 soldering irons.
Check out all our soldering equipment and our Sequre gear!
Features

Ceramics heating core, long life time.
Internal heated design with lead free, fast heating speed.
7 types for your selection, perfect for TS100 and SQ-001 electric soldering iron usage.
It's a internal-heated heating core specially for TS100 and SQ-001, tip and heater as a whole.

Specifications

Material: Ceramic + Steel
Type: TS-C1
Length: Approx. 105mm / 4.13in
Net Weight: Approx. 11g

Includes

1x Sequre TS-C1 Soldering Tip for SQ-001 &amp TS-100




Sequre SQ-D60B PRO MINI Soldering Iron w/ TS-B2 or TS-D24 Tip

These Irons come equipped with the TS-B2 tip or TS-D24 tip and include an XT60 cable, a barrel to USB-C adapter, and a bakelite stand!
The SEQURE SQ-D60B Pro Portable Mini Soldering Iron is a constant temperature electric soldering iron that supports PD3.0 FPV. It's LiPo battery-powered and the perfect outdoor repair and maintenance welding tool. The constant temperature can be adjusted from 100℃ to 400℃, supporting temperature compensation.
The operation is simple and easy, the temperature rises quickly and stably, and the comfortable round handle is very comfortable to work with. This could be your new favorite iron!Choose TS-B2 tip or TS-D24 tip when ordering. 
Check out all our soldering equipment and our Sequre gear!

Features

Automatic sleep

Automatic wake up
Automatic standby
Rapid heating
Temperature adjustment
Smart constant temperature
Temperature compensation
Digital display function
Outdoor Portable

Specifications

Working Temp: 100-400 ℃
Display: LCD
Sleep Time: 1-30min Adjustable
Temperature Compensation: +/- 50℃
Temperature stability range: ± 5 ℃
Temp Unit: ℃
Factory Temp: 300  ℃

Includes







1x SEQURE SQ-D60B Pro Portable Mini Soldering Iron
1x Soldering iron tip
1x Soldering iron stand
1x Manual
1x Hexagon wrench screw pack
1x XT60 to 5525 power cord
1x 5525 to type-c power cable
1x Type-c to type-c power cable








These Irons come equipped with the TS-B2 tip or TS-D24 tip and include an XT60 cable, a barrel to USB-C adapter, and a bakelite stand! The SEQURE SQ-D60B Pro Portable Mini Soldering Iron is a constant temperature electric soldering iron that supports PD3.0 FPV. It's LiPo battery-powered and the perfect outdoor repair a

The SEQURE SQ-D60B Pro Portable Mini Soldering Iron is a constant temperature electric soldering iron that supports PD3.0 FPV. It's LiPo battery-powered and the perfect outdoor repair and maintenance welding tool.

SEQURE SQ-D60B Pro Portable Mini Soldering Iron (With TS-D24 Soldering Tip) 

These Irons come equipped with the TS-B2 tip or TS-D24 tip and include an XT60 cable, a barrel to USB-C adapter, and a bakelite stand!
The SEQURE SQ-D60B Pro Portable Mini Soldering Iron is a constant temperature electric soldering iron that supports PD3.0 FPV. It&#39s LiPo battery-powered and the perfect outdoor repair and maintenance welding tool. The constant temperature can be adjusted from 100℃ to 400℃, supporting temperature compensation.
The operation is simple and easy, the temperature rises quickly and stably, and the comfortable round handle is very comfortable to work with. This could be your new favorite iron!Choose TS-B2 tip or TS-D24 tip when ordering. 
Check out all our soldering equipment and our Sequre gear!

Features

Automatic sleep

Automatic wake up
Automatic standby
Rapid heating
Temperature adjustment
Smart constant temperature
Temperature compensation
Digital display function
Outdoor Portable

Specifications

Working Temp: 100-400 ℃
Display: LCD
Sleep Time: 1-30min Adjustable
Temperature Compensation: +/- 50℃
Temperature stability range: ± 5 ℃
Temp Unit: ℃
Factory Temp: 300  ℃

Includes







1x SEQURE SQ-D60B Pro Portable Mini Soldering Iron
1x Soldering iron tip
1x Soldering iron stand
1x Manual
1x Hexagon wrench screw pack
1x XT60 to 5525 power cord
1x 5525 to type-c power cable
1x Type-c to type-c power cable








Sequre SQ-D60B PRO MINI Soldering Iron w/ TS-B2 or TS-D24 Tip from WREKD Co.

Sequre TS-BC2 Soldering Tip for SQ-001 & TS-100



Spare replacement soldering tip for the TS-100 and SQ-001 soldering irons.
Check out all our soldering equipment and our Sequre gear!
Features

Ceramics heating core, long life time.
Internal heated design with lead free, fast heating speed.
7 types for your selection, perfect for TS100 and SQ-001 electric soldering iron usage.
It&#39s a internal-heated heating core specially for TS100 and SQ-001, tip and heater as a whole.

Specifications

Material: Ceramic + Steel
Type: TS-BC2
Length: Approx. 105mm / 4.13in
Net Weight: Approx. 11g


Includes

1x Sequre TS-BC2 Soldering Tip for SQ-001 &ampamp TS-100




Sequre TS-BC2 Soldering Tip for SQ-001 & TS-100 from WREKD Co.



Spare replacement soldering tip for the TS-100 and SQ-001 soldering irons.
Check out all our soldering equipment and our Sequre gear!
Features

Ceramics heating core, long life time.
Internal heated design with lead free, fast heating speed.
7 types for your selection, perfect for TS100 and SQ-001 electric soldering iron usage.
It's a internal-heated heating core specially for TS100 and SQ-001, tip and heater as a whole.

Specifications

Material: Ceramic + Steel
Type: TS-BC2
Length: Approx. 105mm / 4.13in
Net Weight: Approx. 11g


Includes

1x Sequre TS-BC2 Soldering Tip for SQ-001 &amp TS-100




A replacement TS-BC2 solder tip accessory for TS100/ SQ-001/SQ-D60 digital soldering iron.

SEQURE TS-BC2 Soldering Tip for TS100/SQ-001 Soldering Iron

Sequre SI012 Pro Soldering Iron

The next generation of the popular soldering irons from Sequre is here. Now capable of using the new "TI" long soldering tips that make getting into harder-to-reach spaces easier to access. It also comes with an updated OLED display and is capable of being powered from a 3-6S LiPo battery or USB C power supply which let it reach 450℃ tip temperature. The SI012 also comes with a buzzer to notify you when smart functions such as automatic sleep shutdown and wake-on movement have occurred. Pick yours up today!
The operation is simple and easy, the temperature rises quickly and stably, and the comfortable round handle is very comfortable to work with. This could be your new favorite iron!
We still carry the original TS-100 Soldering Iron!
Check out all our soldering equipment and our Sequre gear!

Features

 Suitable for both long and short soldering iron tips, the maximum temperature is 450℃/842℉.
Working power supply: support PD3.0, DC12V-25V, 3S-6S battery.

0.91 inch OLED display, the brightness display can be adjusted.

Built-in buzzer to remind, automatically heat up when power on, turn it on or off as you like.

An intelligent temperature control algorithm supports temperature compensation and temperature self-calibration.

The shell is made of transparent high temperature resistant fireproof PC environmental protection material.

The sensitivity can be set to reject the interference of environmental factors.

Support ℃/℉ switching left and right-hand screen flip.

Low voltage protection, high temperature, and high voltage alarm, safe and reliable.

Support user firmware upgrade, the function will benefit for life.

Specifications

Working Temp: 100-450 ℃
Display: OLED
Power Input: PD3.0(USB C) or 12-24V(DC5525)
Firmware Upgrade via USB C
Sleep Time: 1-30min Adjustable
Temperature Compensation: +/- 50℃
Temperature stability range: ± 5 ℃
Temp Unit: ℃/F
Factory Temp: 300  ℃















Includes


1x Sequre SI012 Pro MINI Soldering Iron
1 x T12-B2 Soldering Iron Tip or T12-D24 Soldering Iron Tip
1 x Manual
1 x Soldering Iron Stand
1 x Hex Wrench



The next generation of the popular soldering irons from Sequre is here. Now capable of using the new "TI" long soldering tips that make getting into harder-to-reach spaces easier to access. It also comes with an updated OLED display and is capable of being powered from a 3-6S LiPo battery or USB C power supply which le

Sequre SI012 Pro Soldering Iron - Choose Version

The next generation of the popular soldering irons from Sequre is here. Now capable of using the new &quotTI&quot long soldering tips that make getting into harder-to-reach spaces easier to access. It also comes with an updated OLED display and is capable of being powered from a 3-6S LiPo battery or USB C power supply which let it reach 450℃ tip temperature. The SI012 also comes with a buzzer to notify you when smart functions such as automatic sleep shutdown and wake-on movement have occurred. Pick yours up today!
The operation is simple and easy, the temperature rises quickly and stably, and the comfortable round handle is very comfortable to work with. This could be your new favorite iron!
We still carry the original TS-100 Soldering Iron!
Check out all our soldering equipment and our Sequre gear!

Features

 Suitable for both long and short soldering iron tips, the maximum temperature is 450℃/842℉.
Working power supply: support PD3.0, DC12V-25V, 3S-6S battery.

0.91 inch OLED display, the brightness display can be adjusted.

Built-in buzzer to remind, automatically heat up when power on, turn it on or off as you like.

An intelligent temperature control algorithm supports temperature compensation and temperature self-calibration.

The shell is made of transparent high temperature resistant fireproof PC environmental protection material.

The sensitivity can be set to reject the interference of environmental factors.

Support ℃/℉ switching left and right-hand screen flip.

Low voltage protection, high temperature, and high voltage alarm, safe and reliable.

Support user firmware upgrade, the function will benefit for life.

Specifications

Working Temp: 100-450 ℃
Display: OLED
Power Input: PD3.0(USB C) or 12-24V(DC5525)
Firmware Upgrade via USB C
Sleep Time: 1-30min Adjustable
Temperature Compensation: +/- 50℃
Temperature stability range: ± 5 ℃
Temp Unit: ℃/F
Factory Temp: 300  ℃















Includes


1x Sequre SI012 Pro MINI Soldering Iron
1 x T12-B2 Soldering Iron Tip or T12-D24 Soldering Iron Tip
1 x Manual
1 x Soldering Iron Stand
1 x Hex Wrench



Sequre SI012 Pro Soldering Iron - Choose Version from WREKD Co.

Sequre Soldering Power Supply for SQ001 & TS100

A US power supply for SQ001 & TS100 soldering irons and equipment. This adapter has a power output of 19V 3.42A.

SEQURE 19V 3.4A Power Supply for SQ001 & TS100 Soldering Iron

SEQURE 19V 3.4A Power Supply for SQ001 &amp TS100 Soldering Iron

AC power supply for Sequre Mini SQ-001 and TS-100 soldering irons.Checkout all our tools and building supplies gear! Specifications Power Output: 19V 3.42A DC Jack Dimesions: 5.5x2.5mm Suitable for TS100 and SQ-001 electric soldering iron and so on. It provides stable and reliable power supply.   Includes 1x 19V 3.42A 

AC power adapter for powering your TS-100 and SQ-001 soldering irons, or anything that needs 19V 3A output from a 5.5x2.5mm DC jack.
Check out all our soldering equipment and our Sequre gear!
Specifications

Power Output: 19V 3.42A
DC Jack Dimesions: 5.5x2.5mm
Suitable for TS100 and SQ-001 electric soldering iron and so on.
It provides stable and reliable power supply.

Includes

1x 19V 3.42A Power Adapter


AC power adapter for powering your TS-100 and SQ-001 soldering irons, or anything that needs 19V 3A output from a 5.5x2.5mm DC jack. Check out all our soldering equipment and our Sequre gear! Specifications Power Output: 19V 3.42A DC Jack Dimesions: 5.5x2.5mm Suitable for TS100 and SQ-001 electric soldering iron and so

Sequre Soldering Power Supply for SQ001 & TS100 from WREKD Co.

AC power adapter for powering your TS-100 and SQ-001 soldering irons, or anything that needs 19V 3A output from a 5.5x2.5mm DC jack