FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Walksnail

Walksnail Patch Antenna V2 5.8GHz For Avatar Goggles X - RP-SMA, LHCP

CADDX

Quality patch antenna from Walksnail designed for the Goggles X.
Check out all our U.FL VTX antennas and our selection of Walksnail HD products!
Features


Integrated dual antenna mask for easy installation.

It weighs only 32g and is comfortable to wear.

Antenna with professional RF substrate.

Right-angle SMA-RP connector with rubber handwheel.

Specifications

Bandwidth: 5600-6000MHz

Polarization: LHCP

Gain: 6.7dBi

VSWR: &lt1.4

Efficiency: 97%

Beam-width: 127°

Connector: SMA-RP

Weight: 9.6g (single antenna ) 32g (total)

Size: W146mm L35mm H10mm


Includes

1x Walksnail Patch Antenna V2 5.8GHz RP-SMA For Avatar Goggles X - LHCP



Quality patch antenna from Walksnail designed for the Goggles X. Check out all our U.FL VTX antennas and our selection of Walksnail HD products! Features Integrated dual antenna mask for easy installation. It weighs only 32g and is comfortable to wear. Antenna with professional RF substrate. Right-angle SMA-RP connecto

Walksnail Patch Antenna V2 5.8GHz RP-SMA For Avatar Goggles X - LHCP

Increase your range and penetration with these patch antennas for the Walksnail Avatar Goggles X Don't forget to check out the rest of our LHCP FPV Antenna's as well as our Walksnail Products! Features: Integrated dual antenna mask for easy installation. Weighs only 32g and is comfortable to wear. Antenna with professi

Walksnail Patch Antenna V2 For Avatar Goggles X

Integrated dual antenna mask for easy installation. Weighs only 32g and is comfortable to wear. Antenna with professional RF substrate. Right-angle SMA-RP connector with rubber handwheel. bandwidth 5600-6000MHz Polarization LHCP Gain 6.7dBi VSWR 1.4 Efficiency 97% Beam-width 127 Connector SMA-RP Weight 9.6g (single ant

Unleash powerful performance with this advanced Walksnail Patch Antenna for the Avatar Goggles X.

Walksnail Patch Antenna V2 - Avatar Goggles X

Antenna Connector

Antennas send signals to and from your VRX/VTX and RX/TX. Many video transmitters and radio receivers come with antennas. Ensure if you need them. Or choose upgrades to increase range and penetration. Select appropriate antennas based on connector, radio frequency, and polarization (if circularly polarized). 

Antennas

Antenna Frequency

Polarization

Walksnail RedBird Antenna V2 5.8GHz For Avatar Goggles X - RP-SMA, LHCP

Increase your range with these Redbird antennas for the Walksnail Avatar Goggles X
Check out all our RP-SMA antennas and our selection of Walksnail HD products!
Features


Antenna unit using Laser-Direct-structuring for small size and high performance.
Customised integrated RP-SMA socket, antenna height is only 20mm.
Redbird Antenna V2 for a wide range of flight scenarios.
Circularly polarised design with nearly perfect axial ratio.

Specifications

Bandwidth 5600-6000MHz
Polarization LHCP
Gain 1.5dBi
VSWR &lt1.4
Efficiency 97%
Connector RP-SMA
Weight 3.5g
Size R15.5mm H20.5mm



Includes

2x Walksnail Redbird Antenna V2 For Avatar Goggles X


Increase your range with these Redbird antennas for the Walksnail Avatar Goggles X Check out all our RP-SMA antennas and our selection of Walksnail HD products! Features Antenna unit using Laser-Direct-structuring for small size and high performance. Customised integrated RP-SMA socket, antenna height is only 20mm. Red

Walksnail RedBird Antenna V2 5.8GHz RP-SMA For Avatar Goggles X (2pc) - LHCP

Walksnail RedBird Antenna V2 5.8GHz RP-SMA For Avatar Goggles X (2pc) 

Increase your range with these Redbird antennas for the Walksnail Avatar Goggles X
Check out all our RP-SMA antennas and our selection of Walksnail HD products!
Features


Antenna unit using Laser-Direct-structuring for small size and high performance.
Customised integrated RP-SMA socket, antenna height is only 20mm.
Redbird Antenna V2 for a wide range of flight scenarios.
Circularly polarised design with nearly perfect axial ratio.

Specifications

Bandwidth 5600-6000MHz
Polarization LHCP
Gain 1.5dBi
VSWR &amplt1.4
Efficiency 97%
Connector RP-SMA
Weight 3.5g
Size R15.5mm H20.5mm



Includes

2x Walksnail Redbird Antenna V2 For Avatar Goggles X


Walksnail RedBird Antenna V2 5.8GHz RP-SMA For Avatar Goggles X (2pc) - LHCP from WREKD Co.

CADDX FPV

<p> </p>
<ul>
<li>Antenna unit using Laser-Direct-structuring for small size and high performance.</li>
<li>Customised integrated SMA socket, antenna height is only 20mm.</li>
<li>Redbird Antenna V2 for a wide range of flight scenarios.</li>
<li>Circularly polarised design with nearly perfect axial ratio.</li>
</ul>
<p>Parameter：</p>
<table width="100%" data-mce-fragment="1">
<tbody data-mce-fragment="1">
<tr data-mce-fragment="1">
<td style="width: 28.8247%" data-mce-fragment="1">Bandwidth</td>
<td style="width: 68.1665%" data-mce-fragment="1">5600-6000MHz</td>
</tr>
<tr data-mce-fragment="1">
<td style="width: 28.8247%" data-mce-fragment="1">Polarization</td>
<td style="width: 68.1665%" data-mce-fragment="1">LHCP</td>
</tr>
<tr data-mce-fragment="1">
<td style="width: 28.8247%" data-mce-fragment="1">Gain</td>
<td style="width: 68.1665%" data-mce-fragment="1">1.5dBi</td>
</tr>
<tr data-mce-fragment="1">
<td style="width: 28.8247%" data-mce-fragment="1">VSWR</td>
<td style="width: 68.1665%" data-mce-fragment="1">&lt1.4</td>
</tr>
<tr data-mce-fragment="1">
<td style="width: 28.8247%" data-mce-fragment="1">Efficiency</td>
<td style="width: 68.1665%" data-mce-fragment="1">97%</td>
</tr>
<tr data-mce-fragment="1">
<td style="width: 28.8247%" data-mce-fragment="1">Connector<span> </span>
</td>
<td style="width: 68.1665%" data-mce-fragment="1">SMA-RP</td>
</tr>
<tr data-mce-fragment="1">
<td style="width: 28.8247%" data-mce-fragment="1">Weight</td>
<td style="width: 68.1665%" data-mce-fragment="1">3.5g</td>
</tr>
<tr data-mce-fragment="1">
<td style="width: 28.8247%" data-mce-fragment="1">Size</td>
<td style="width: 68.1665%" data-mce-fragment="1">R15.5mm H20.5mm</td>
</tr>
</tbody>
</table>

  Antenna unit using Laser-Direct-structuring for small size and high performance. Customised integrated SMA socket, antenna height is only 20mm. Redbird Antenna V2 for a wide range of flight scenarios. Circularly polarised design with nearly perfect axial ratio. Parameter： Bandwidth 5600-6000MHz Polarization LHCP Gain

Walksnail Redbird Antenna V2 For Avatar HD Goggles X (2pcs) – CADDX FPV

 

Antenna unit using Laser-Direct-structuring for small size and high performance.
Customised integrated SMA socket, antenna height is only 20mm.
Redbird Antenna V2 for a wide range of flight scenari

Walksnail Redbird Antenna V2 For Avatar HD Goggles X (2pcs)

Experience unparalleled performance with the Walksnail Redbird Antenna V2, meticulously crafted for the Avatar Goggles X.

Walksnail Redbird Antenna V2 (Set of 2) - Avatar Goggles X

RadioMaster

RadioMaster Bandit 915MHz Moxon Antenna - RP-SMA

The RadioMaster Bandit Moxon Antenna is a high-gain, high-efficiency directional transmitter antenna with a compact design and rugged housing to protect the internal components.&nbsp

The RadioMaster Bandit Moxon Antenna is a high-gain, high-efficiency directional transmitter antenna with a compact design and rugged housing to protect the internal components. 

RadioMaster Bandit 915MHz T-Antenna - RP-SMA

The RadioMaster Bandit T-Antenna, with its 80mm length, provides superior interference separation.&nbsp

The RadioMaster Bandit T-Antenna, with its 80mm length, provides superior interference separation. 

NewBeeDrone

NewBeeDrone Pagoda Antenna DIY Kit - LHCP

Introducing the NewBeeDrone DIY Pagoda Antenna Kit!
Who doesn't love a little DIY project? With the NewBeeDrone Pagoda 5.8ghz DIY Kit, you can feel satisfied knowing your great FPV range is your doing. Next time you're out flying and have to explain how you personally built your quad, you can say you even built your antenna! Show off the only hexagonal shape pagoda antenna on the market at your next race or meet. Ever try to build a cloverleaf style 5.8ghz antenna? It's HARD!!! Not this kit. Now you can easily build your own pagoda antenna at home and all you need is a Soldering iron. The kit comes with a jig to perfectly and easily space the pagoda PCBs during construction. The antenna can be used as a receiver or transmitter antenna and pairs well with other LHCP circular polarized antenna styles. The coax cable is semi-rigid and has a standard SMA connector.
 
Specs: 

Size - 52mm x 23mm
Weight - 7 grams
Band - 5.8ghz
Polarization - LHCP or RHCP
Gain - 2dbic
Radiation Efficiency 96.5%
Axial Ratio - &lt1.3
Standing-wave ratio - S11 &lt -20 dB
VSWR &lt 1.22
Connector - SMA

 


Introducing the NewBeeDrone DIY Pagoda Antenna Kit! Who doesn't love a little DIY project? With the NewBeeDrone Pagoda 5.8ghz DIY Kit, you can feel satisfied knowing your great FPV range is your doing. Next time you're out flying and have to explain how you personally built your quad, you can say you even built your an

NewBeeDrone Pagoda Antenna DIY Kit LHCP

NewBeeDrone Pagoda Antenna DIY Kit LHCP 
Introducing the NewBeeDrone DIY Pagoda Antenna Kit!
Who doesn&#39t love a little DIY project? With the NewBeeDrone Pagoda 5.8ghz DIY Kit, you can feel satisfied knowing your great FPV range is your doing. Next time you&#39re out flying and have to explain how you personally built your quad, you can say you even built your antenna! Show off the only hexagonal shape pagoda antenna on the market at your next race or meet. Ever try to build a cloverleaf style 5.8ghz antenna? It&#39s HARD!!! Not this kit. Now you can easily build your own pagoda antenna at home and all you need is a Soldering iron. The kit comes with a jig to perfectly and easily space the pagoda PCBs during construction. The antenna can be used as a receiver or transmitter antenna and pairs well with other LHCP circular polarized antenna styles. The coax cable is semi-rigid and has a standard SMA connector.
 
Specs: 

Size - 52mm x 23mm
Weight - 7 grams
Band - 5.8ghz
Polarization - LHCP or RHCP
Gain - 2dbic
Radiation Efficiency 96.5%
Axial Ratio - &amplt1.3
Standing-wave ratio - S11 &amplt -20 dB
VSWR &amplt 1.22
Connector - SMA

 


NewBeeDrone Pagoda Antenna DIY Kit LHCP  Introducing the NewBeeDrone DIY Pagoda Antenna Kit! Who doesn't love a little DIY project? With the NewBeeDrone Pagoda 5.8ghz DIY Kit, you can feel satisfied knowing your great FPV range is your doing. Next time you're out flying and have to explain how you personally built your

NewBeeDrone Pagoda Antenna DIY Kit LHCP from WREKD Co.

NewBeeDrone Pagoda Antenna DIY Kit - RHCP

Introducing the NewBeeDrone DIY Pagoda Antenna Kit!
Who doesn&#39t love a little DIY project? With the NewBeeDrone Pagoda 5.8ghz DIY Kit, you can feel satisfied knowing your great FPV range is your doing. Next time you&#39re out flying and have to explain how you personally built your quad, you can say you even built your antenna! Show off the only hexagonal shape pagoda antenna on the market at your next race or meet. Ever try to build a cloverleaf style 5.8ghz antenna? It&#39s HARD!!! Not this kit. Now you can easily build your own pagoda antenna at home and all you need is a Soldering iron. The kit comes with a jig to perfectly and easily space the pagoda PCBs during construction. The antenna can be used as a receiver or transmitter antenna and pairs well with other LHCP circular polarized antenna styles. The coax cable is semi-rigid and has a standard SMA connector.
 
Specs: 

Size - 52mm x 23mm
Weight - 7 grams
Band - 5.8ghz
Polarization - LHCP or RHCP
Gain - 2dbic
Radiation Efficiency 96.5%
Axial Ratio - &amplt1.3
Standing-wave ratio - S11 &amplt -20 dB
VSWR &amplt 1.22
Connector - SMA

 


NewBeeDrone Pagoda Antenna DIY Kit RHCP from WREKD Co.

NewBeeDrone Pagoda Antenna DIY Kit RHCP

NewBeeDrone BeeBrain Clover 5.8GHz Antenna - LHCP

NewBeeDrone BeeBrain Clover 5.8GHz Antenna (LHCP)
The BeeBrain Clover 5.8GHz 4 leaf polarized antenna is a great alternative that helps reject‚ multipath interference, which is a common problem on standard dipole stock antennas. 
Using an RHCP or LHCP antenna is beneficial for use at races where lots of pilots are up in the air at the same time to help separate video bleed over by being on different polarization channels. Just make sure to use an RHCP/LHCP antenna on your BeeBrain and your Video Goggles at the same time to have the best signal separation as possible. 
This antenna has a U.FL connector that is plug-n-play with the BeeBrain V2 and BeeBrain Lite making it a simple swap that requires no soldering. 
 
Specifications:

Weight: approx 1.7g
Length: 50mm (connector to top of lobe) 
Polarization: LHCP or RHCP
Connector Type: U.FL (3mm)
Frequency: 5.8Ghz
Cable: Flexible RG178


NewBeeDrone BeeBrain Clover 5.8GHz Antenna (LHCP) The BeeBrain Clover 5.8GHz 4 leaf polarized antenna is a great alternative that helps reject‚ multipath interference, which is a common problem on standard dipole stock antennas.  Using an RHCP or LHCP antenna is beneficial for use at races where lots of pilots are up i

NewBeeDrone BeeBrain Clover 5.8GHz Antenna (LHCP) from WREKD Co.

NewBeeDrone BeeBrain Clover 5.8GHz Antenna (LHCP)

NewBeeDrone BeeTX 5.8Ghz Antenna

Direct plug-n-play replacement antenna for the BeeTX VTX board for the BeeBrain V2. We suggest using high-temp silicone glue to cover the UFL connection.Specifications:Connector Type: U.FL (3mm)Frequency: 5.8GhzLength: 62mmPackage Includes:1 Replacement Antenna

Direct plug-n-play replacement antenna for the BeeTX VTX board for the BeeBrain V2. We suggest using high-temp silicone glue to cover the UFL connection.
Specifications:

Connector Type: U.FL (3mm)
Frequency: 5.8Ghz
Length: 62mm

Package Includes:

1 Replacement Antenna


Direct plug-n-play replacement antenna for the BeeTX VTX board for the BeeBrain V2. We suggest using high-temp silicone glue to cover the UFL connection. Specifications: Connector Type: U.FL (3mm) Frequency: 5.8Ghz Length: 62mm Package Includes: 1 Replacement Antenna

Replacement antenna for the NewBeeDrone BeeTX VTX board on the BeeBrain V2.

NewBeeDrone BeeTX 5.8Ghz Antenna from WREKD Co.

TrueRC

TrueRC X2-AIR MK II 5.8GHz SMA Receiver Antenna - RHCP












Optimize your FPV experience with the TrueRC X2-AIR MK II 5.8GHz SMA Receiver Antenna - RHCP. Following on the latest improvement of the X-AIR 5.8 MK II, the TrueRC X²-AIR  comes with a new compact and light design. This antenna offers high gain and a wide horizontal beam for superior performance. Enjoy improved range and reception with this 5.8GHz SMA antenna.







Check out our ever-expanding selection of VTX antennas and our range of TrueRC gear!












Specifications

Gain: 13 dBic
Beam-width Horizontal: 150deg
Beam-width Vertical: 62deg
Hor. beam @-3dB: 74deg.
Vert. beam @-3dB: 34deg.
Connector: SMA
Polarization: RHCP 
Dimension: 72mmx34mmx22mm
Weight: 16g

Includes

1x TrueRC X²-AIR MK II 5.8GHz SMA Receiver Antenna - RHCP


Optimize your FPV experience with the TrueRC X2-AIR MK II 5.8GHz SMA Receiver Antenna - RHCP. Following on the latest improvement of the X-AIR 5.8 MK II, the TrueRC X²-AIR  comes with a new compact and light design. This antenna offers high gain and a wide horizontal beam for superior performance. Enjoy improved range 

TrueRC X²-AIR MK II 5.8GHz SMA Receiver Antenna - RHCP from WREKD Co.

TrueRC X²-AIR MK II 5.8GHz SMA Receiver Antenna - RHCP

Following on the latest improvement of the X-AIR 5.8 MK II, TrueRX has shrunk down X²-AIR to bring you high gain and wide horizontal beam in a new compact and light package.

TrueRC X²-AIR 5.8GHz MK II SMA Antenna (RHCP) 

TRUERC

TrueRC X2-AIR MKII 5.8GHz Receiver Antenna Pair for HDZero VRX4 - RHCP

The new TrueRC X2-Air MKII 5.8GHz Receiver Antenna Pair for HDZero VRX4 - RHCP has more gain and more convenience! This is the adaptation of the all mighty X²-AIR into a slick low profile face mount for the HDzero VRX4 module. Simply slide on the antennas on the module’s rails and screw on the custom knurled SMA connectors. Improved 13dBic gain and massive combined beam width of 165deg, yield an amazing flight experience in the toughest conditions. 
Check out all our FPV Receivers &ampamp Antennas, and all our TrueRC gear!
Features

Circularly Polarized
Sector type beam shape (widest on horizontal)
Mount direct on HDzero module with included slide-on mounts.
Compact low-profile design, easy to store and transport
High 13 dBic for unsurpassed long range and signal penetration
Large SWR and axial ratio bandwidth, work even out of the 5.8GHz band
Super wide 150 degree beam for each antenna combining to 165deg beam width
Custom knurled SMA connectors

Specifications

Bandwidth: 5.1GHz-7.0GHz

Polarization: RHCP
Gain: 13 dBic

Beam-Width: 150deg

Beam-width @-3dB:  75deg

Antenna Dimensions: 72x34x15mm

Connector: SMA

Weight: 20g

Includes

2x TrueRC X2-Air MKII 5.8GHz Receiver Antenna Pair for HDZero VRX4
2x HDZero VRX4 mounting brackets for X2-Air MKII



The new TrueRC X2-Air MKII 5.8GHz Receiver Antenna Pair for HDZero VRX4 - RHCP has more gain and more convenience! This is the adaptation of the all mighty X²-AIR into a slick low profile face mount for the HDzero VRX4 module. Simply slide on the antennas on the module’s rails and screw on the custom knurled SMA connec

TrueRC X2-Air MKII 5.8GHz Receiver Antenna Pair for HDZero VRX4 - RHCP from WREKD Co.

TrueRC X2-Air MKII 5.8GHz Receiver Antenna Pair for HDZero VRX4 - RHCP

True RC

TrueRC X²-AIR 5.8 MK II Pair for HDZERO VRX4 RHCP

The best quality First Person View equipment. Free or discounted shipping on all orders.Drone Racing, RC Airplanes, FPV Cameras, FPV Goggles, Video Transmitters, RC Quads, Drone Antennas, Lipo Batteries, and Ground Station Equipment.All available for amateurs, schools, hobbyists, government, and wholesale buyers.

TrueRC X²-AIR 5.8 MK II Pair for HDZERO VRX4 RHCP - RMRC

The new TrueRC X2-Air MKII 5.8GHz Receiver Antenna Pair for HDZero VRX4 - RHCP has more gain and more convenience! This is the adaptation of the all mighty X²-AIR into a slick low profile face mount for the HDzero VRX4 module. Simply slide on the antennas on the module’s rails and screw on the custom knurled SMA connectors. Improved 13dBic gain and massive combined beam width of 165deg, yield an amazing flight experience in the toughest conditions. 
Check out all our FPV Receivers &amp Antennas, and all our TrueRC gear!
Features

Circularly Polarized
Sector type beam shape (widest on horizontal)
Mount direct on HDzero module with included slide-on mounts.
Compact low-profile design, easy to store and transport
High 13 dBic for unsurpassed long range and signal penetration
Large SWR and axial ratio bandwidth, work even out of the 5.8GHz band
Super wide 150 degree beam for each antenna combining to 165deg beam width
Custom knurled SMA connectors

Specifications

Bandwidth: 5.1GHz-7.0GHz

Polarization: RHCP
Gain: 13 dBic

Beam-Width: 150deg

Beam-width @-3dB:  75deg

Antenna Dimensions: 72x34x15mm

Connector: SMA

Weight: 20g

Includes

2x TrueRC X2-Air MKII 5.8GHz Receiver Antenna Pair for HDZero VRX4
2x HDZero VRX4 mounting brackets for X2-Air MKII



Improve your flight in the worst conditions with our TrueRC X2-Air MKII 5.8GHz Receiver Antenna Pair for HDZero VRX4. Make your gain and experience the best it can be today!

TrueRC X2-Air MKII 5.8GHz Receiver Antenna Pair for HDZero VRX4 - RHCP For Sale

More gain and more convenience! This is the adaptation of the all mighty X²-AIR into a slick low profile face mount for the HDzero VRX4 module. Simply slide on the antennas on the module’s rails and screw on the custom knurled SMA connectors. Improved 13dBic gain and massive combined beam width of 165deg, yield an amaz

TrueRC X2-AIR MK II 5.8GHz Patch Antenna Pair for HDzero VRX4 - RHCP

TrueRC X2-AIR MKII 5.8GHz Receiver Antenna Pair for DJI - LHCP

More gain and more convenience! The X&sup2-AIR for DJI FPV combines two antennas on a single connector. Simply peel the included adhesive, stick them on and throw your goggles in your bag ready for a day of flying.

More gain and more convenience! The X²-AIR for DJI FPV combines two antennas on a single connector. Simply peel the included adhesive, stick them on and throw your goggles in your bag ready for a day of flying.

TrueRC X²-AIR 5.8GHz MK II Antenna for DJI Goggles (Set of 2) - LHCP

More gain and more convenience! This is the adaptation of the all mighty X²-AIR into a slick low profile face mount for the DJI goggles . Simply peel the included adhesive, stick them on and throw your goggles in your bag ready for a day of flying. Improved 13dBic gain and massive combined beam width of 180deg, yield an amazing flight experience in the toughest conditions. Fill the remaining ports with a pair of singularity stubby and performances never been so convenient!
Check out all our FPV Receivers &ampamp Antennas, and all our TrueRC gear!
Features

Sector type beam shape (widest on horizontal)
Mount direct on DJI faceplate with included adhesive backing
Compact low-profile design on your goggles, easy to store and transport
High 13 dBic for unsurpassed long range and signal penetration
Large SWR and axial ratio bandwidth, work even out of the 5.8GHz band
Super wide 150 degree beam for each antenna combining to 180deg beam width
Custom knurled RP-SMA connectors

Specifications

Bandwidth: 5.1GHz-7.0GHz

Polarization: LHCP
Gain: 13 dBic

Beam-Width: 150deg

Beam-width @-3dB:  75deg

Antenna Dimensions: 72mm x 34mm x 15mm

Connection: Custom knurled RP-SMA

Weight: 20g

Includes

2x TrueRC X2-Air MKII 5.8GHz Receiver Antenna Pair for DJI - LHCP





More gain and more convenience! This is the adaptation of the all mighty X²-AIR into a slick low profile face mount for the DJI goggles . Simply peel the included adhesive, stick them on and throw your goggles in your bag ready for a day of flying. Improved 13dBic gain and massive combined beam width of 180deg, yield a

TrueRC X2-Air MKII 5.8GHz Receiver Antenna Pair for DJI - LHCP from WREKD Co.

TrueRC X2-Air MKII 5.8GHz Receiver Antenna Pair for DJI - LHCP

TrueRC X2-Air MKII 5.8GHz Receiver Antenna Pair for DJI HD Goggles - LHCP

More gain and more convenience! This is the adaptation of the all mighty X²-AIR into a slick low profile face mount for the DJI goggles . Simply peel the included adhesive, stick them on and throw your goggles in your bag ready for a day of flying. Improved 13dBic gain and massive combined beam width of 180deg, yield an amazing flight experience in the toughest conditions. Fill the remaining ports with a pair of singularity stubby and performances never been so convenient!
Check out all our FPV Receivers &amp Antennas, and all our TrueRC gear!
Features

Sector type beam shape (widest on horizontal)
Mount direct on DJI faceplate with included adhesive backing
Compact low-profile design on your goggles, easy to store and transport
High 13 dBic for unsurpassed long range and signal penetration
Large SWR and axial ratio bandwidth, work even out of the 5.8GHz band
Super wide 150 degree beam for each antenna combining to 180deg beam width
Custom knurled RP-SMA connectors

Specifications

Bandwidth: 5.1GHz-7.0GHz

Polarization: LHCP
Gain: 13 dBic

Beam-Width: 150deg

Beam-width @-3dB:  75deg

Antenna Dimensions: 72mm x 34mm x 15mm

Connection: Custom knurled RP-SMA

Weight: 20g

Includes

2x TrueRC X2-Air MKII 5.8GHz Receiver Antenna Pair for DJI - LHCP





TrueRC X2-AIR MKII & Stubbies 5.8GHz Receiver Antenna Set for DJI - LHCP

TrueRC X2-Air MKII & Stubbies 5.8GHz Receiver Antenna Set for DJI HD Goggles - LHCP

More gain and more convenience! This is the adaptation of the all mighty X²-AIR into a slick low profile face mount for the DJI goggles . Simply peel the included adhesive, stick them on and throw your goggles in your bag ready for a day of flying. Improved 13dBic gain and massive combined beam width of 180deg, yield an amazing flight experience in the toughest conditions. Fill the remaining ports with a pair of included singularity stubbies and performance has never been so convenient!
Check out all our FPV Receivers &amp Antennas, and all our TrueRC gear!
Features

Sector type beam shape (widest on horizontal)
Mount direct on DJI faceplate with included adhesive backing
Compact low-profile design on your goggles, easy to store and transport
High 13 dBic for unsurpassed long range and signal penetration
Large SWR and axial ratio bandwidth, work even out of the 5.8GHz band
Super wide 150 degree beam for each antenna combining to 180deg beam width
Custom knurled RP-SMA connectors
Highly compact included stubby antennas for combined directional and omnidirectional coverage

Specifications
X2-Air

Bandwidth: 5.1GHz-7.0GHz

Polarization: LHCP
Gain: 13 dBic

Beam-Width: 150deg

Beam-width @-3dB:  75deg

Antenna Dimensions: 72mm x 34mm x 15mm

Connection: Custom knurled RP-SMA

Weight: 20g

Stubby

Bandwidth: 5.6GHz-6.0GHz

Polarization: LHCP
Gain: 1.9 dBic

Radiation Efficiency: 99%
Antenna Dimensions: 12.7mm x 20mm

Connection: RP-SMA

Weight: 3.7g

Includes

2x TrueRC X2-Air MKII  5.8GHz Receiver Antenna
2x TrueRC  Stubby 5.8GHz Receiver Antenna






The LHCP TrueRC X2-Air MKII & Stubbies 5.8GHz Receiver Antenna Set for DJI offers more gain and convenience than ever before. Get unreal performance today!

TrueRC X2-Air MKII & Stubbies 5.8GHz Receiver Antenna Set for DJI - LHCP

LHCP TrueRC X2-Air MKII & Stubbies 5.8GHz Receiver Antenna Set for DJI for Sale

TrueRC X²-AIR 5.8GHz MK II Antenna Combo Kit w/ Singularity Antennas - LHCP

More gain and more convenience! This is the adaptation of the all mighty X²-AIR into a slick low profile face mount for the DJI goggles . Simply peel the included adhesive, stick them on and throw your goggles in your bag ready for a day of flying. Improved 13dBic gain and massive combined beam width of 180deg, yield an amazing flight experience in the toughest conditions. Fill the remaining ports with a pair of included singularity stubbies and performance has never been so convenient!
Check out all our FPV Receivers &ampamp Antennas, and all our TrueRC gear!
Features

Sector type beam shape (widest on horizontal)
Mount direct on DJI faceplate with included adhesive backing
Compact low-profile design on your goggles, easy to store and transport
High 13 dBic for unsurpassed long range and signal penetration
Large SWR and axial ratio bandwidth, work even out of the 5.8GHz band
Super wide 150 degree beam for each antenna combining to 180deg beam width
Custom knurled RP-SMA connectors
Highly compact included stubby antennas for combined directional and omnidirectional coverage

Specifications
X2-Air

Bandwidth: 5.1GHz-7.0GHz

Polarization: LHCP
Gain: 13 dBic

Beam-Width: 150deg

Beam-width @-3dB:  75deg

Antenna Dimensions: 72mm x 34mm x 15mm

Connection: Custom knurled RP-SMA

Weight: 20g

Stubby

Bandwidth: 5.6GHz-6.0GHz

Polarization: LHCP
Gain: 1.9 dBic

Radiation Efficiency: 99%
Antenna Dimensions: 12.7mm x 20mm

Connection: RP-SMA

Weight: 3.7g

Includes

2x TrueRC X2-Air MKII  5.8GHz Receiver Antenna
2x TrueRC  Stubby 5.8GHz Receiver Antenna






TrueRC X2-Air MKII & Stubbies 5.8GHz Receiver Antenna Set for DJI - LHCP from WREKD Co.

TrueRC X-AIR MK II 5.8GHz Antenna & Stubby Combo for HDZero/Shark Byte - RHCP

Swap the included patch antennas from the Shark Byte digital HD FPV system with high quality X-air circular polarized directional antennas! This is the adaptation of the renowned X-AIR into a slick low profile mount for the Shark Byte RX5. Simply pop out the white panels and stick them on for an easy upgrade and a killer look. Improved beam width of 120deg, yield an amazing flight experience in the toughest conditions. Fill the remaining ports with a pair of included singularity stubbies and performance has never been so convenient!
Check out our other HD Zero and Shark Byte compatible products as well as our TrueRC selection!

Features

Direct replacement for stock patch antennas
Compact low-profile design on your goggles, easy to store and transport
High 10 dBic for unsurpassed long range and signal penetration
Large SWR and axial ratio bandwidth, works even out of the 5.8GHz band

Specifications
TrueRC X-AIR MK II

Bandwidth: 5.1GHz-7.0GHz
Gain: 10 dBic
Polarization: RHCP
Beam-width: 120deg
Beam-width @-3dB: 68deg
Connector: U.fl
Dimensions: 34x34x15mm
Weight: 8.8g each

TrueRC Singularity Stubby

Gain: 1.9dbic
Polarization: RHCP
Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: &amplt=1.5:1
Connector: SMA
Dimensions: 12.7x20mm
Weight: 3.7g each

Includes

1x TrueRC X-AIR 5.8GHz MK II &ampamp Stubbies Combo for HDzero/SharkByte


Swap the included patch antennas from the Shark Byte digital HD FPV system with high quality X-air circular polarized directional antennas! This is the adaptation of the renowned X-AIR into a slick low profile mount for the Shark Byte RX5. Simply pop out the white panels and stick them on for an easy upgrade and a kill

TrueRC X-AIR  MK II 5.8GHz Antennas & Stubbies Combo for HDZero/SharkByte - RHCP from WREKD Co.

TrueRC X-AIR  MK II 5.8GHz Antennas & Stubbies Combo for HDZero/SharkByte - RHCP

TrueRC X-AIR MK II 5.8GHz Patch Antennas & Stubby Combo for HDzero/SharkByte - RHCP

Swap the included patch antennas from the Shark Byte digital HD FPV system with high quality X-air circular polarized directional antennas! This is the adaptation of the renowned X-AIR into a slick low profile mount for the Shark Byte RX5. Simply pop out the white panels and stick them on for an easy upgrade and a killer look. Improved beam width of 120deg, yield an amazing flight experience in the toughest conditions. Fill the remaining ports with a pair of included singularity stubbies and performance has never been so convenient!
Check out our other HD Zero and Shark Byte compatible products as well as our TrueRC selection!

Features

Direct replacement for stock patch antennas
Compact low-profile design on your goggles, easy to store and transport
High 10 dBic for unsurpassed long range and signal penetration
Large SWR and axial ratio bandwidth, works even out of the 5.8GHz band

Specifications
TrueRC X-AIR MK II

Bandwidth: 5.1GHz-7.0GHz
Gain: 10 dBic
Polarization: RHCP
Beam-width: 120deg
Beam-width @-3dB: 68deg
Connector: U.fl
Dimensions: 34x34x15mm
Weight: 8.8g each

TrueRC Singularity Stubby

Gain: 1.9dbic
Polarization: RHCP
Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: &lt=1.5:1
Connector: SMA
Dimensions: 12.7x20mm
Weight: 3.7g each

Includes

1x TrueRC X-AIR 5.8GHz MK II &amp Stubbies Combo for HDzero/SharkByte


The RHCP TrueRC X-AIR MK II 5.8GHz Antennas & Stubbies Combo, designed for HDZero and SharkByte, will improve your field of view and video quality. Try them today!

RHCP TrueRC X-AIR MK II 5.8GHz Antennas & Stubbies Combo for Sale - For HDzero/SharkByte

TrueRC Singularity V2 1280/58 1.3GHz 90° SMA Antenna

The next iteration of our TrueRC's singularity antenna, smaller, more rugged and more uniform pattern.
Check out our ever expanding selection of VTX antennas and our range of TrueRC gear!
Specifications

Gain: 1.9dBic
Cross-Polar Rejection: -15 to -30dB, (2.2%)
Bandwidth: 1250MHz-1290MHz
Radiation Efficiency: 99%
SWR: &lt=1.5:1
Weight: 18g
Dimensions(head): 40.5mm dia. X 22.5mm height.
Length: 156mm
Cable: RG402/RG316 coax.
Connector: True-SMA

Includes

1x TrueRC Singularity V2 1280/58 1.3GHz 90° SMA Antenna - RHCP 


The next iteration of our TrueRC's singularity antenna, smaller, more rugged and more uniform pattern.

TrueRC Singularity V2 1280/58 1.3GHz 90° SMA Antenna - RHCP

TrueRC Singularity V2 1280/58 1.3GHz 90° SMA Antenna - Choose Your Polarization - For Sale At RaceDayQuads

The next iteration of our TrueRC&#39s singularity antenna, smaller, more rugged and more uniform pattern.
Check out our ever expanding selection of VTX antennas and our range of TrueRC gear!
Specifications

Gain: 1.9dBic
Cross-Polar Rejection: -15 to -30dB, (2.2%)
Bandwidth: 1250MHz-1290MHz
Radiation Efficiency: 99%
SWR: &amplt=1.5:1
Weight: 18g
Dimensions(head): 40.5mm dia. X 22.5mm height.
Length: 156mm
Cable: RG402/RG316 coax.
Connector: True-SMA

Includes

1x TrueRC Singularity V2 1280/58 1.3GHz 90° SMA Antenna - RHCP 


The next iteration of our TrueRC's singularity antenna, smaller, more rugged and more uniform pattern. Check out our ever expanding selection of VTX antennas and our range of TrueRC gear! Specifications Gain: 1.9dBic Cross-Polar Rejection: -15 to -30dB, (2.2%) Bandwidth: 1250MHz-1290MHz Radiation Efficiency: 99% SWR: &

TrueRC Singularity V2 1280/58 1.3GHz 90° SMA Antenna - RHCP from WREKD Co.

The singularity is a new revolutionary circularly polarized (CP) antenna. Not only by its ultra-pure circular properties, but its amazingly small size.Also available with Straight feed SMA option. Specs: Gain: 1.9dBic Cross-Polar Rejection: -15 to -30dB, (2.2%) Bandwidth: 1250MHz-1290MHz Radiation Efficiency: 99% SWR: 

TrueRC Singularity 1280 V2 1.3GHz SMA Antenna SIDE FEED (RHCP/LHCP)

TrueRC Singularity 5.8GHz U.FL Antenna

TrueRC does it again with the Singularity series! They've come up with a stronger, smaller and more sensitive antenna. The singularity 5.8 is TrueRC's most advanced antenna. They pushed miniaturization further than ever before, yet managed to push performances a notch higher still. It is the smallest and lightest 5.8GHz CP antenna ever made.Check out our ever expanding selection of VTX antennas and our range of TrueRC gear!

Specifications

Gain: 1.9dbic

Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: &lt=1.5:1
Cable: RG178
Connector: U.FL
Size: 11.8mm x 80mm (PDF)

Weight: 1.3g

Patent Pending
Includes

1x TrueRC Singularity 5.8GHz U.FL Antenna - RHCP 


TrueRC does it again with the Singularity series! They've come up with a stronger, smaller and more sensitive antenna. The singularity 5.8 is TrueRC's most advanced antenna. They pushed miniaturization further than ever before, yet managed to push performances a notch higher still. It is the smallest and lightest 5.8GH

TrueRC Singularity 5.8GHz U.FL Antenna - RHCP

TrueRC does it again with the Singularity series! They&#39ve come up with a stronger, smaller and more sensitive antenna. The singularity 5.8 is TrueRC&#39s most advanced antenna. They pushed miniaturization further than ever before, yet managed to push performances a notch higher still. It is the smallest and lightest 5.8GHz CP antenna ever made.Check out our ever expanding selection of VTX antennas and our range of TrueRC gear!

Specifications

Gain: 1.9dbic

Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: &amplt=1.5:1
Cable: RG178
Connector: U.FL
Size: 11.8mm x 80mm (PDF)

Weight: 1.3g

Patent Pending
Includes

1x TrueRC Singularity 5.8GHz U.FL Antenna - RHCP 


TrueRC Singularity 5.8GHz U.FL Antenna - RHCP from WREKD Co.

The singularity 5.8 is our most advanced antenna. We pushed miniaturization further than ever before, yet managed to push performances a notch higher still. It is the smallest and lightest 5.8GHz CP antenna ever made. SPECS: Gain: x.xdbic Cross-Polar Rejection: -15 to -30dB (1.9%) Bandwidth: 5.6GHz-6.0GHz Radiation Eff

TrueRC SINGULARITY 5.8 U.FL LHCP

TrueRC Singularity 5.8GHz Stubby SMA Antenna

TrueRC does it again with the Singularity series! They&#39ve come up with a stronger, smaller and more sensitive antenna. This is the Singularity 5.8, now in a stubby form factor. The case is made thicker than the original version for extreme durability.We also carry these in RP-SMA for the DJI Digital FPV GogglesCheck out our ever expanding selection of VTX antennas and our range of TrueRC gear!

Specifications

Gain: 1.9dbic

Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: &amplt=1.5:1
Connector: SMA
Size: 12.7mm x 20mm (PDF)

Weight: 3.7 g

Patent Pending
Includes

1x TrueRC Singularity 5.8GHz Stubby SMA Antenna - RHCP


TrueRC does it again with the Singularity series! They've come up with a stronger, smaller and more sensitive antenna. This is the Singularity 5.8, now in a stubby form factor. The case is made thicker than the original version for extreme durability.We also carry these in RP-SMA for the DJI Digital FPV GogglesCheck ou

TrueRC Singularity 5.8GHz Stubby SMA Antenna - RHCP from WREKD Co.

TrueRC Singularity 5.8GHz Stubby SMA Antenna - RHCP

TrueRC does it again with the Singularity series! They've come up with a stronger, smaller and more sensitive antenna. This is the Singularity 5.8, now in a stubby form factor. The case is made thicker than the original version for extreme durability.We also carry these in RP-SMA for the DJI Digital FPV GogglesCheck out our ever expanding selection of VTX antennas and our range of TrueRC gear!

Specifications

Gain: 1.9dbic

Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: &lt=1.5:1
Connector: SMA
Size: 12.7mm x 20mm (PDF)

Weight: 3.7 g

Patent Pending
Includes

1x TrueRC Singularity 5.8GHz Stubby SMA Antenna - RHCP


Don't miss the TrueRC Singularity 5.8GHz Stubby SMA Antenna! This new, advanced antenna saves space and weight without sacrificing performance.

TrueRC Singularity 5.8GHz Stubby Receiver Antenna for DJI - LHCP

4-pack of singularity 5.8 stubby made especially for the DJI Digital FPV System Goggles. Antennas are direct fit with much lower profile than stock and over 50% more range!
Check out all our DJI compatible gear, and all our TrueRC products!
Specifications


Gain: 1.9dbic
Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: &amplt=1.5:1
Weight: 3.7 g
Size: 12.7mm x 20mm (PDF)

Connector: RP-SMA

Includes


4x TrueRC Singularity 5.8GHz Stubby Receiver Antenna


4-pack of singularity 5.8 stubby made especially for the DJI Digital FPV System Goggles. Antennas are direct fit with much lower profile than stock and over 50% more range! Check out all our DJI compatible gear, and all our TrueRC products! Specifications Gain: 1.9dbic Cross-Polar Rejection: -15 to -30dB (1.9%) Bandwid

TrueRC Singularity 5.8GHz Stubby Receiver Antenna 4 Pack for DJI - Choose Color from WREKD Co.

TrueRC Singularity 5.8GHz Stubby Receiver Antenna 4 Pack for DJI - Choose Color

4-pack of singularity 5.8 stubby made especially for the DJI fpv system goggle. Antennas are direct fit with much lower profile than stock and over 50% more range! SPECS: Gain: 1.9dbic Cross-Polar Rejection: -15 to -30dB (1.9%) Bandwidth: 5.6GHz-6.0GHz Radiation Efficiency: 99% SWR: &lt;=1.5:1 Weight: 3.7 g Size: 12.7m

TrueRC Singularity 5.8 Stubby For DJI HD Goggles - Black (4-Pack for DJI)

4-pack of singularity 5.8 stubby made especially for the DJI fpv system goggle. Antennas are direct fit with much lower profile than stock and over 50% more range! Check out our other DJI HD Antennas and the rest of our TrueRC Products! Specifications: Gain: 1.9dbic Cross-Polar Rejection: -15 to -30dB (1.9%) Bandwidth:

TrueRC Singularity 5.8 Clear Stubby For DJI HD Goggles - LHCP (RP-SMA 4-Pack)

The Singularity antenna from TrueRC now comes in a "stubby" form factor. Smaller than ever while maintaining durability due to a thicker housing. Specifications Cross-Polar Rejection: -15 to -30dB (1.9%) Bandwidth: 5.6GHz-6.0GHz Radiation Efficiency: 99% Polarization: LHCP SWR: &lt;=1.5:1 Weight: 3.7 g Size: 12.7mm x 2

TrueRC Singularity 5.8 Stubby Antenna (1PC-LHCP) - SMA

This singularity 5.8 stubby was made especially for the DJI Digital FPV System Goggles. The antennas are direct fit with much lower profile than stock and over 50% more range!
Check out all our DJI compatible gear, and all our TrueRC products!
Specifications


Polarization: LHCP
Gain: 1.9dbic
Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: &amplt=1.5:1
Weight: 3.7 g
Size: 12.7mm x 20mm 
Connector: RP-SMA

Includes


1x TrueRC Singularity 5.8GHz Stubby RP-SMA Antenna for DJI


This singularity 5.8 stubby was made especially for the DJI Digital FPV System Goggles. The antennas are direct fit with much lower profile than stock and over 50% more range! Check out all our DJI compatible gear, and all our TrueRC products! Specifications Polarization: LHCP Gain: 1.9dbic Cross-Polar Rejection: -15 t

TrueRC Singularity 5.8GHz Stubby RP-SMA Antenna for DJI (1PC) - Choose Color from WREKD Co.

TrueRC Singularity 5.8GHz Stubby RP-SMA Antenna for DJI (1PC) - Choose Color

This singularity 5.8 stubby was made especially for the DJI Digital FPV System Goggles. The antennas are direct fit with much lower profile than stock and over 50% more range!
Check out all our DJI compatible gear, and all our TrueRC products!
Specifications


Polarization: LHCP
Gain: 1.9dbic
Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: &lt=1.5:1
Weight: 3.7 g
Size: 12.7mm x 20mm 
Connector: RP-SMA

Includes


1x TrueRC Singularity 5.8GHz Stubby RP-SMA Antenna for DJI


TrueRC Singularity 5.8GHz Stubby RP-SMA Antenna for DJI (1PC) - Choose

TrueRC Singularity 5.8 Stubby For DJI HD Goggles - (4-Pack for DJI)

4-pack of singularity 5.8 stubby made especially for the DJI Digital FPV System Goggles. Antennas are direct fit with much lower profile than stock and over 50% more range!
Check out all our DJI compatible gear, and all our TrueRC products!
Specifications


Gain: 1.9dbic
Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: &lt=1.5:1
Weight: 3.7 g
Size: 12.7mm x 20mm (PDF)

Connector: RP-SMA

Includes


4x TrueRC Singularity 5.8GHz Stubby Receiver Antenna


TrueRC Singularity 5.8GHz Stubby Receiver Antenna 4 Pack for DJI - Cho

&nbspA 4-pack of singularity 5.8GHz stubbies by TrueRC made specifically to fit the&nbspDJI Digital HD FPV Goggle.&nbsp

 A 4-pack of singularity 5.8GHz stubbies by TrueRC made specifically to fit the DJI Digital HD FPV Goggle. 

TrueRC Singularity Stubby 5.8GHz Antenna Set for DJI (LHCP) (RP-SMA - 4pcs)

TrueRC Singularity 5.8GHz Short U.FL Antenna

The singularity 5.8 is our most advanced antenna. We pushed miniaturization further than ever before, yet managed to push performances a notch higher still. It is the smallest and lightest 5.8GHz CP antenna ever made. Check out our other FPV Antennas and the rest of our TrueRC Products! Specifications: Gain: x.xdbic Cr

TrueRC SINGULARITY 5.8 U.FL (SHORT 40mm) RHCP

TrueRC does it again with the Singularity series! They've come up with a stronger, smaller and more sensitive antenna. The singularity 5.8 is TrueRC's most advanced antenna. They pushed miniaturization further than ever before, yet managed to push performances a notch higher still. It is the smallest and lightest 5.8GHz CP antenna ever made.Check out our ever expanding selection of VTX antennas and our range of TrueRC gear!

Specifications

Gain: 1.9dbic

Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: &lt=1.5:1
Cable: RG178
Connector: U.FL

Size: 11.8mm x 40mm (PDF)

Weight: 1.05g

Patent Pending
Includes

1x TrueRC Singularity 5.8GHz Short U.FL Antenna


TrueRC Singularity 5.8GHz Short U.FL Antenna - Choose Version

TrueRC does it again with the Singularity series! They&#39ve come up with a stronger, smaller and more sensitive antenna. The singularity 5.8 is TrueRC&#39s most advanced antenna. They pushed miniaturization further than ever before, yet managed to push performances a notch higher still. It is the smallest and lightest 5.8GHz CP antenna ever made.Check out our ever expanding selection of VTX antennas and our range of TrueRC gear!

Specifications

Gain: 1.9dbic

Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: &amplt=1.5:1
Cable: RG178
Connector: U.FL

Size: 11.8mm x 40mm (PDF)

Weight: 1.05g

Patent Pending
Includes

1x TrueRC Singularity 5.8GHz Short U.FL Antenna


TrueRC Singularity 5.8GHz Short U.FL Antenna - Choose Version from WREKD Co.

TrueRC SINGULARITY 5.8 U.FL (SHORT) LHCP

TrueRC Matchstick Carbon Edition 5.8GHz RP-SMA Antenna for DJI - LHCP

The matchstick 5.8 carbon edition feature a sleek and flexible carbon fiber reinforced cable for great durability and an amazing look. These are a limited LHCP run with RP-SMA connectors.
Check out all our DJI compatible gear, our ever expanding selection of FPV Receiver antennas and our range of TrueRC gear!
Specifications

Gain: 1.9dbic
Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: &lt=1.5:1
Weight: 6.2 g
Size: 12.7mm x 70mm
Cable: Carbon fiber reinforced
Connector: RP-SMA

Includes

1x TrueRC Matchstick Carbon Edition 5.8GHz RP-SMA Antenna - LHCP


You'll love the clean and lightweight TrueRC Matchstick Carbon Edition 5.8GHz LHCP RP-SMA DJI Antenna available at RDQ! Carbon Fiber reinforces this antenna for increased durability.

TrueRC Matchstick Carbon Edition 5.8GHz LHCP RP-SMA DJI Antenna for Sale

The matchstick 5.8 carbon edition feature a sleek and flexible carbon fiber reinforced cable for great durability and an amazing look. These are a limited LHCP run with RP-SMA connectors.
Check out all our DJI compatible gear, our ever expanding selection of FPV Receiver antennas and our range of TrueRC gear!
Specifications

Gain: 1.9dbic
Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: &amplt=1.5:1
Weight: 6.2 g
Size: 12.7mm x 70mm
Cable: Carbon fiber reinforced
Connector: RP-SMA

Includes

1x TrueRC Matchstick Carbon Edition 5.8GHz RP-SMA Antenna - LHCP


The matchstick 5.8 carbon edition feature a sleek and flexible carbon fiber reinforced cable for great durability and an amazing look. These are a limited LHCP run with RP-SMA connectors. Check out all our DJI compatible gear, our ever expanding selection of FPV Receiver antennas and our range of TrueRC gear! Specifica

TrueRC Matchstick Carbon Edition 5.8GHz RP-SMA Antenna for DJI - LHCP from WREKD Co.

The matchstick 5.8 carbon edition is a stylish and flexible carbon fiber reinforced antenna for solid durability and a clean look. These are a limited LHCP run with RP-SMA connectors and are perfect for the DJI air unit!Check out our other DJI HD Antennas and the rest of our TrueRC Products! SPECIFICATIONS: Gain: 1.9db

TRUERC Matchstick 5.8 - SHORT - LHCP - RP-SMA – Carbon Edition for DJI

TrueRC D-Pole 5.8GHz U.FL Antenna - Linear

The D-pole is our work on the dipole, one of the simplest form of antenna. Extremely durable and light weight it is perfect for micro fpv. It’s wide band characteristic cover the whole 5-6Ghz band, making it equally as good for analog or digital communication.Also available with an MMCX connector.Check out our ever expanding selection of VTX antennas and our range of TrueRC gear!
Specifications


Gain: 2.5dbic
Bandwidth: 5GHz-6GHz
Weight: .88g
Size: 80mm x 25mm
Cable: Flexible RG178
Connector: U.fl

Includes

1x TrueRC D-Pole 5.8GHz U.FL Antenna - Linear


The D-pole is our work on the dipole, one of the simplest form of antenna. Extremely durable and light weight it is perfect for micro fpv. It’s wide band characteristic cover the whole 5-6Ghz band, making it equally as good for analog or digital communication.Also available with an MMCX connector.Check out our ever exp

TrueRC D-Pole 5.8GHz U.FL Antenna - Linear from WREKD Co.

VTX Antenna Connector

The VTX processes the image from your FPV camera and sends it to your goggle’s video receiver (VRX). If you chose as digital video system, you need a VTX that matches the system. Most analog VTXs and VRXs are compatible with each other, and your biggest consideration will be how much output power you need. The more output power, the more range and better signal you’ll get. Learn more about VTXs.