FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Generic / No Brand

SMA Pigtail U.FL Connector for VTXs

FPVELITE

This 3" SMA to UFL pigtail will fit most VTXs with the same connector.
Check out the rest of our pigtails, adapters &amp connectors!
Includes

1x SMA Pigtail U.FL Connector for VTXs - Choose Type


This 3" SMA to UFL pigtail will fit most VTXs with the same connector. Check out the rest of our pigtails, adapters &amp; connectors! Includes 1x SMA Pigtail U.FL Connector for VTXs - Choose Type

SMA Pigtail U.FL Connector for VTXs - Choose Your Version

SMA Pigtail U.FL Connector for VTXs - Choose Your Version - For Sale At RaceDayQuads

WREKD General

This 3&quot SMA to UFL pigtail will fit most VTXs with the same connector.
Check out the rest of our pigtails, adapters &ampamp connectors!
Includes

1x SMA Pigtail U.FL Connector for VTXs - Choose Type


SMA Pigtail U.FL Connector for VTXs - Choose Your Version from WREKD Co.

TrueRC

TrueRC TRUE-SMA SMA Connector for RG402

TRUERC

The new high quality TrueRC SMA connector, with grippy knurled finish and carefully tuned design. &lt0.1dB loss @5.8GHz!
This connector is sized for RG402 coaxial cable. Perfect for DIY antennas, repair or upgrade. 
Check out all our pigtails, adapters and connectors, as well as the entire range of TrueRC gear!
Specifications

Frequency – max: 12GHz
Impedance: 50Ohm
Weight: 2.3g
Style: Straight
Size: 8mm x 7mm
Cable type: RG402 (0.141″ semi-rigid)
Center contact: Male pin
Body material: Brass alloy
Body finish: Gold

Includes

1x TrueRC TRUE-SMA SMA Connector for RG402


The new high quality TrueRC SMA connector, with grippy knurled finish and carefully tuned design. &lt;0.1dB loss @5.8GHz! This connector is sized for RG402 coaxial cable. Perfect for DIY antennas, repair or upgrade.  Check out all our pigtails, adapters and connectors, as well as the entire range of TrueRC gear! Specif

The new high quality TrueRC SMA connector, with grippy knurled finish and carefully tuned design. &amplt0.1dB loss @5.8GHz!
This connector is sized for RG402 coaxial cable. Perfect for DIY antennas, repair or upgrade. 
Check out all our pigtails, adapters and connectors, as well as the entire range of TrueRC gear!
Specifications

Frequency – max: 12GHz
Impedance: 50Ohm
Weight: 2.3g
Style: Straight
Size: 8mm x 7mm
Cable type: RG402 (0.141″ semi-rigid)
Center contact: Male pin
Body material: Brass alloy
Body finish: Gold

Includes

1x TrueRC TRUE-SMA SMA Connector for RG402


TrueRC TRUE-SMA SMA Connector for RG402 from WREKD Co.

The new high quality TrueRC SMA male connector, with grippy knurled finish and carefully tuned design. &lt;0.04dB loss @5.8GHz! This connector is sized for RG402 coaxial cable. Perfect for DIY antennas, repair or upgrade.  Check out the rest of our VTX and VRX Accessories! Specifications: Max. Frequency: 12GHz Impedanc

TrueRC SMA Male Connector for DIY RG402 Cable

TrueRC TRUE-SMA SMA Connector for RG405

The new high quality TrueRC SMA male connector, with grippy knurled finish and carefully tuned design. &lt;0.04dB loss @5.8GHz! This connector is sized for RG405 coaxial cable. Perfect for DIY antennas, repair or upgrade.  Check out the rest of our VTX and VRX Accessories! Specifications: Max. Frequency: 12GHz Impedanc

TrueRC SMA Male Connector for DIY RG405 Cable

The new high quality TrueRC SMA connector, with grippy knurled finish and carefully tuned design. &amplt0.1dB loss @5.8GHz!
This connector is sized for RG405 coaxial cable. Perfect for DIY antennas, repair or upgrade. 
Check out all our pigtails, adapters and connectors, as well as the entire range of TrueRC gear!
Specifications

Frequency – max: 12GHz
Impedance: 50Ohm
Weight: 2.3g
Style: straight
Size: 8mm x 7mm
Cable type: RG405 (0.086″ semi-rigid)
Center contact: Male pin
Body material: Brass alloy
Body finish: Gold

Includes

1x TrueRC TRUE-SMA SMA Connector for RG405


The new high quality TrueRC SMA connector, with grippy knurled finish and carefully tuned design. &lt;0.1dB loss @5.8GHz! This connector is sized for RG405 coaxial cable. Perfect for DIY antennas, repair or upgrade.  Check out all our pigtails, adapters and connectors, as well as the entire range of TrueRC gear! Specif

TrueRC TRUE-SMA SMA Connector for RG405 from WREKD Co.

The new high quality TrueRC SMA connector, with grippy knurled finish and carefully tuned design. &lt0.1dB loss @5.8GHz!
This connector is sized for RG405 coaxial cable. Perfect for DIY antennas, repair or upgrade. 
Check out all our pigtails, adapters and connectors, as well as the entire range of TrueRC gear!
Specifications

Frequency – max: 12GHz
Impedance: 50Ohm
Weight: 2.3g
Style: straight
Size: 8mm x 7mm
Cable type: RG405 (0.086″ semi-rigid)
Center contact: Male pin
Body material: Brass alloy
Body finish: Gold

Includes

1x TrueRC TRUE-SMA SMA Connector for RG405


TrueRC TRUE-SMA RP-SMA Male to SMA Female Adapter

The new high quality TrueRC SMA adapter, with grippy knurled finish and carefully tuned design. &lt0.1dB loss @5.8GHz!
This adapter lets you attach standard SMA antennas to DJI RP-SMA pigtails (it's got holes on both ends) 
We also carry an angled version with a thumbscrew perfect for converting DJI goggles to use your standard SMA antennas. 
Check out all our pigtails, adapters and connectors, as well as the entire range of TrueRC gear!
Specifications

Max. Frequency: 12GHz
Impedance: 50Ohm
Weight: 4.9g
Style: Straight
Body material: Brass alloy
Body finish: Gold

Includes

1x TrueRC TRUE-SMA RP-SMA Male to SMA Female Adapter


The new high quality TrueRC SMA adapter, with grippy knurled finish and carefully tuned design. &lt;0.1dB loss @5.8GHz! This adapter lets you attach standard SMA antennas to DJI RP-SMA pigtails (it's got holes on both ends)  We also carry an angled version with a thumbscrew perfect for converting DJI goggles to use you

The new high quality TrueRC SMA adapter, with grippy knurled finish and carefully tuned design. &amplt0.1dB loss @5.8GHz!
This adapter lets you attach standard SMA antennas to DJI RP-SMA pigtails (it&#39s got holes on both ends) 
We also carry an angled version with a thumbscrew perfect for converting DJI goggles to use your standard SMA antennas. 
Check out all our pigtails, adapters and connectors, as well as the entire range of TrueRC gear!
Specifications

Max. Frequency: 12GHz
Impedance: 50Ohm
Weight: 4.9g
Style: Straight
Body material: Brass alloy
Body finish: Gold

Includes

1x TrueRC TRUE-SMA RP-SMA Male to SMA Female Adapter


TrueRC TRUE-SMA RP-SMA Male to SMA Female Adapter from WREKD Co.

The new high quality TrueRC RP-SMA Male to SMA Female adapter, with grippy knurled finish and carefully tuned design. This adapter lets you attach standard SMA antennas to DJI RP-SMA pigtails. Check out the rest of our VTX and VRX Accessories! Specifications: Max. Frequency: 12GHz Impedance: 50Ohm Weight: 3.1g Connecto

TrueRC RP-SMA Male to SMA Female Adapter

TrueRC TRUE-SMA SMA Connector for RG316

The new high quality TrueRC SMA connector, with grippy knurled finish and carefully tuned design. &lt0.1dB loss @5.8GHz!
This connector is sized for RG316 coaxial cable. Perfect for DIY antennas, repair or upgrade. 
Check out all our pigtails, adapters and connectors, as well as the entire range of TrueRC gear!
Specifications

Frequency – max: 6GHz
Impedance: 50Ohm
Weight: 2.3g
Style: Straight
Size: 8mm x 7mm
Cable type: RG316
Center contact: Male pin
Body material: Brass alloy
Body finish: Gold

Includes

1x TrueRC TRUE-SMA SMA Connector for RG316


The new high quality TrueRC SMA connector, with grippy knurled finish and carefully tuned design. &lt;0.1dB loss @5.8GHz! This connector is sized for RG316 coaxial cable. Perfect for DIY antennas, repair or upgrade.  Check out all our pigtails, adapters and connectors, as well as the entire range of TrueRC gear! Specif

The new high quality TrueRC SMA connector, with grippy knurled finish and carefully tuned design. &amplt0.1dB loss @5.8GHz!
This connector is sized for RG316 coaxial cable. Perfect for DIY antennas, repair or upgrade. 
Check out all our pigtails, adapters and connectors, as well as the entire range of TrueRC gear!
Specifications

Frequency – max: 6GHz
Impedance: 50Ohm
Weight: 2.3g
Style: Straight
Size: 8mm x 7mm
Cable type: RG316
Center contact: Male pin
Body material: Brass alloy
Body finish: Gold

Includes

1x TrueRC TRUE-SMA SMA Connector for RG316


TrueRC TRUE-SMA SMA Connector for RG316 from WREKD Co.

The new high quality TrueRC SMA male connector, with grippy knurled finish and carefully tuned design. &lt;0.04dB loss @5.8GHz! This connector is sized for RG316 coaxial cable. Perfect for DIY antennas, repair or upgrade.  Check out the rest of our VTX and VRX Accessories! Specifications: Max. Frequency: 6GHz Impedance

TrueRC SMA Male Connector for DIY RG316 Cable

TrueRC TRUE-SMA 90° SMA Connector for RG316

The new high quality TrueRC SMA connector, with grippy knurled finish and carefully tuned design. &lt0.1dB loss @5.8GHz!
This 90 degree connector is sized for RG316 coaxial cable. Perfect for DIY antennas, repair or upgrade. 
Check out all our pigtails, adapters and connectors, as well as the entire range of TrueRC gear!
Specifications

Frequency – max: 6GHz
Impedance: 50Ohm
Weight: 2.3g
Style: 90 degree
Size: 8mm x 7mm
Cable type: RG316
Center contact: Male pin
Body material: Brass alloy
Body finish: Gold


Includes

1x TrueRC TRUE-SMA 90 Degree SMA Connector for RG316


The new high quality TrueRC SMA connector, with grippy knurled finish and carefully tuned design. &lt;0.1dB loss @5.8GHz! This 90 degree connector is sized for RG316 coaxial cable. Perfect for DIY antennas, repair or upgrade.  Check out all our pigtails, adapters and connectors, as well as the entire range of TrueRC ge

TrueRC TRUE-SMA 90 Degree SMA Connector for RG316

The new high quality TrueRC SMA connector, with grippy knurled finish and carefully tuned design. &amplt0.1dB loss @5.8GHz!
This 90 degree connector is sized for RG316 coaxial cable. Perfect for DIY antennas, repair or upgrade. 
Check out all our pigtails, adapters and connectors, as well as the entire range of TrueRC gear!
Specifications

Frequency – max: 6GHz
Impedance: 50Ohm
Weight: 2.3g
Style: 90 degree
Size: 8mm x 7mm
Cable type: RG316
Center contact: Male pin
Body material: Brass alloy
Body finish: Gold


Includes

1x TrueRC TRUE-SMA 90 Degree SMA Connector for RG316


TrueRC TRUE-SMA 90 Degree SMA Connector for RG316 from WREKD Co.

The new high quality TrueRC SMA male connector, with grippy knurled finish and carefully tuned design. &lt;0.04dB loss @5.8GHz! This 90 degree connector is sized for RG316 coaxial cable. Perfect for DIY antennas, repair or upgrade.  Check out the rest of our VTX and VRX Accessories! Specifications: Max. Frequency: 6GHz

TrueRC SMA Male 90 Degree Connector for DIY RG316 Cable

TrueRC TRUE-SMA 90° SMA Adapter

The new high quality TrueRC SMA adapter, with grippy knurled finish and carefully tuned design. &lt0.1dB loss @5.8GHz!
Check out all our pigtails, adapters and connectors, as well as the entire range of TrueRC gear!
Specifications

Max. Frequency: 12GHz
Impedance: 50Ohm
Weight: 4.9g
Style: 90deg
Body material: Brass alloy
Body finish: Gold

Includes

1x TrueRC TRUE-SMA 90 Degree SMA Adapter


The new high quality TrueRC SMA adapter, with grippy knurled finish and carefully tuned design. &lt;0.1dB loss @5.8GHz! Check out all our pigtails, adapters and connectors, as well as the entire range of TrueRC gear! Specifications Max. Frequency: 12GHz Impedance: 50Ohm Weight: 4.9g Style: 90deg Body material: Brass al

TrueRC TRUE-SMA 90 Degree SMA Adapter

The new high quality TrueRC SMA adapter, with grippy knurled finish and carefully tuned design. &lt;0.1dB loss @5.8GHz! Check out the rest of our VTX and VRX Accessories! Specifications: Max. Frequency: 12GHz Impedance: 50Ohm Weight: 5g Connector: SMA Angle: 90 Degrees Body material: Brass alloy Body finish: Gold Packa

TrueRC 90 Degree SMA Male to SMA Female Connector

The new high quality TrueRC SMA adapter, with grippy knurled finish and carefully tuned design. &amplt0.1dB loss @5.8GHz!
Check out all our pigtails, adapters and connectors, as well as the entire range of TrueRC gear!
Specifications

Max. Frequency: 12GHz
Impedance: 50Ohm
Weight: 4.9g
Style: 90deg
Body material: Brass alloy
Body finish: Gold

Includes

1x TrueRC TRUE-SMA 90 Degree SMA Adapter


TrueRC TRUE-SMA 90 Degree SMA Adapter from WREKD Co.

TrueRC 5cm SMA Male to Female Rigid (but Flexible) Extension

This new SMA Extension can be used for a variety of FPV applications. This can be mounted on your long range build to move your antenna away from any interference that can be caused by your electronics. It can be used on your receiver as well to move your Omni antenna far above your head or to move your patch farther out. 
Check out all our pigtails, connectors and adapters and the rest of our TrueRC selection!
Specifications

Length: 7 cm (measured from the ends of each connector)
Connector: SMA Male/Female 
Coax Cable: 4MM Rigid
Color: Black

Includes

1x TrueRC 5CM SMA Male to Female Rigid (but Flexible) Extension


This new SMA Extension can be used for a variety of FPV applications. This can be mounted on your long range build to move your antenna away from any interference that can be caused by your electronics. It can be used on your receiver as well to move your Omni antenna far above your head or to move your patch farther o

TrueRC 5CM SMA Male to Female Rigid (but Flexible) Extension

TrueRC 5CM SMA Male to Female Rigid (but Flexible) Extension from WREKD Co.

Flywoo

Flywoo A30-F 22AWG 80mm Pigtail

The A30 high current connectors are an ideal fit for high-performance drones, providing a reliable connection with minimal resistance. This 5-pack of A30 Pigtails has each measuring 80mm. Get improved performance and reliability with the ability of up to 15A of continuous current - far higher than the 4.5A of PH2.0 connectors. Discharging more current in the same capacity than PH2.0 crimped pins, A30 connectors provide significantly more power - leading to extended flight time at full throttle on 1S whoop drones. Upgrade to A30 connectors for better performance and reliability.
Check out all our pigtails and connectors as well as our products from Flywoo!
Flywoo factory images say 20awg, but 1st batch shipped are actually 22awg.

Specifications

Wire Length: 80mm
Wire Gauge: 22AWG
Weight: 1.2g (ea.)
Connector: A30 Female

Includes

1x  Flywoo Pigtail A30-F 22AWG 80mm - 5 Pack


The A30 high current connectors are an ideal fit for high-performance drones, providing a reliable connection with minimal resistance. This 5-pack of A30 Pigtails has each measuring 80mm. Get improved performance and reliability with the ability of up to 15A of continuous current - far higher than the 4.5A of PH2.0 con

Flywoo Pigtail A30-F 22AWG 80mm - 5 Pack from WREKD Co.

Flywoo Pigtail A30-F 22AWG 80mm - 5 Pack

FLYWOO

Flywoo Pigtail A30-F to PH2.0 Male Charge/Discharge Adapter - 22AWG 60mm

This adapter pigtail allows for quick and easy charging of batteries with A30 connectors using chargers equipped with PH2.0 connectors. It provides a convenient solution to all your charging needs.
Check out all our pigtails and connectors as well as our products from Flywoo!
Specifications

Wire Length: 60mm
Wire Gauge: 22AWG
Weight: 1.3g (ea.)
Connector: A30 Female &ampamp PH2.0

Includes

1x Flywoo Pigtail A30-F to PH2.0 Male Charge/Discharge Adapter 22AWG 60mm - 5 Pack


This adapter pigtail allows for quick and easy charging of batteries with A30 connectors using chargers equipped with PH2.0 connectors. It provides a convenient solution to all your charging needs. Check out all our pigtails and connectors as well as our products from Flywoo! Specifications Wire Length: 60mm Wire Gauge

Flywoo Pigtail A30-F to PH2.0 Male Charge/Discharge Adapter 22AWG 60mm - 5 Pack from WREKD Co.

Flywoo Pigtail A30-F to PH2.0 Male Charge/Discharge Adapter 22AWG 60mm - 5 Pack

This adapter pigtail allows for quick and easy charging of batteries with A30 connectors using chargers equipped with PH2.0 connectors. It provides a convenient solution to all your charging needs.
Check out all our pigtails and connectors as well as our products from Flywoo!
Specifications

Wire Length: 60mm
Wire Gauge: 22AWG
Weight: 1.3g (ea.)
Connector: A30 Female &amp PH2.0

Includes

1x Flywoo Pigtail A30-F to PH2.0 Male Charge/Discharge Adapter 22AWG 60mm - 5 Pack


Flywoo Pigtail A30-F to PH2.0 Male Charge/Discharge Adapter 22AWG 60mm

HDZero

HDZero MIPI Camera Cable

DescriptionThe HDZero MIPI Cable 40mm is a digital HD video connector between HDZero series VTX and a MIPI camera. This short MIPI cable is for use in compact builds like whoop, toothpick, and racing frames.SpecificationsModel: HDZero MIPI Cable 40mmLength: 40mm(1.6 inch)Pin: 20 PinsCompatible camera:    Runcam Micro HDZero CameraRuncam HdZero Micro V2 CameraRunCam HDZero Nano Digital FPV Camera Compatible VTX:HDZero Whoop (TX5S.1)HDZero Race V2HDZero RaceHDZero  FreestyleHDZero Whoop LiteShark Byte TX5S.1 VTXShark Byte TX5M.1 VTXShark Byte TX5R.1 VTX IncludesHDZero MIPI Cable 40mm * 1

The best quality First Person View equipment. Free or discounted shipping on all orders.Drone Racing, RC Airplanes, FPV Cameras, FPV Goggles, Video Transmitters, RC Quads, Drone Antennas, Lipo Batteries, and Ground Station Equipment.All available for amateurs, schools, hobbyists, government, and wholesale buyers.

HDZero MIPI Cable 40mm - www.readymaderc.com

HDZero MIPI Cable 40mm

The HDZero MIPI Cable 40mm is a digital HD video connector between HDZero series VTX and a MIPI camera. This short MIPI cable is for use in compact builds like whoop, toothpick, and racing frames. A MIPI Cable for the HDZero Shark Byte HD FPV system.  Also Available in 80mm, 120mm and 250mm. Check out our HDZero Compat

RunCam

These&nbspHDZero MIPI Camera Cables&nbspare digital HD video cables that connect HDZero series VTX with a MIPI&nbspcamera. These cables are universal and are compatible with all HDZero,&nbspShark Byte, and Divimath products.Available in 40mm, 80mm, 120mm, and 250mm.&nbsp

These HDZero MIPI Camera Cables are digital HD video cables that connect HDZero series VTX with a MIPI camera. These cables are universal and are compatible with all HDZero, Shark Byte, and Divimath products.
Available in 40mm, 8

HDZERO

The HD Zero MIPI Cable is a digital HD video connector between HD Zero series VTX and a MIPI camera. This MIPI cable is for use in FPV wings and middle drones.
Check out the rest of our camera replacement parts, and HDZero gear!
Includes

1x HDZero MIPI Camera Cable


The HD Zero MIPI Cable is a digital HD video connector between HD Zero series VTX and a MIPI camera. This MIPI cable is for use in FPV wings and middle drones. Check out the rest of our camera replacement parts, and HDZero gear! Includes 1x HDZero MIPI Camera Cable

HDZero MIPI Camera Cable - Choose Length

The HDZero MIPI Cable 80mm is a digital HD video connector between HDZero series VTX and a MIPI camera. This 80mm MIPI cable is for use in FPV wings and middle drones. A MIPI Cable for the HDZero Shark Byte HD FPV system.  Also Available in 40mm, 120mm and 250mm. Check out our HDZero Compatible Gear and the rest of our

HDZero MIPI Cable 80mm

The HDZero MIPI Cable 250mm is a digital HD video connector between HDZero series VTX and a MIPI camera.  This extra long MIPI cable is for use in FPV wings and longer drones, where positioning the VTX further from the camera is desirable.  A MIPI Cable for the HDZero Shark Byte HD FPV system.  Also Available in 40mm, 

HDZero MIPI Cable 250mm

The HDZero MIPI Cable 120mm is a digital HD video connector between HDZero series VTX and a MIPI camera. This 120mm MIPI cable is for use in FPV wings and middle drones. A MIPI Cable for the HDZero Shark Byte HD FPV system.  Also Available in 40mm, 80mm and 250mm. Check out our HDZero Compatible Gear and the rest of ou

HDZero MIPI Cable 120mm

Description The HDZero MIPI Cable 120mm is a digital HD video connector between HDZero series VTX and a MIPI camera. This 120mm MIPI cable is for use in FPV wings and middle drones. Specifications  &#009&#009&#009&#009&#009&#009Model:&#009&#009&#009    HDZero MIPI Cable 120mm &#009&#009&#009&#009&#009&#009&#009Length:&#009&#009&#009    120mm(4.72 inch)&#009&#009&#009&#009&#009&#009&#009Pin:&#009&#009&#009    20 Pins&#009&#009&#009&#009&#009&#009&#009Compatible camera:&#009&#009&#009&#009&#009&#009    Runcam Micro HDZero Camera&#009&#009&#009    RunCam Nano Digital FPV Camera &#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Compatible VTX:&#009&#009&#009&#009&#009&#009    Shark Byte TX5S.1 VTX&#009&#009&#009    Shark Byte TX5M.1 VTX&#009&#009&#009    Shark Byte TX5R.1 VTX &#009&#009&#009&#009&#009&#009 IncludesHDZero MIPI Cable 120mm * 1

Description The HDZero MIPI Cable 120mm is a digital HD video connector between HDZero series VTX and a MIPI camera. This 120mm MIPI cable is for use in FPV wings and middle drones. Specifications  						Model:			    HDZero MIPI Cable 120mm 							Length:			    120mm(4.72 inch)							Pin:			    20 Pins							Compatible camera:						    Runcam Micro HDZero Camera			    RunCam Nano Digital FPV Camera 										Compatible VTX:						    Shark Byte TX5S.1 VTX			    Shark Byte TX5M.1 VTX			    Shark Byte TX5R.1 VTX 						 IncludesHDZero MIPI Cable 120mm * 1

HDZero MIPI Cable 120mm | HDZERO

DescriptionThe HDZero MIPI Cable 120mm is a digital HD video connector between HDZero series VTX and a MIPI camera. This 120mm MIPI cable is for use in FPV wings and middle drones.SpecificationsModel: HDZero MIPI Cable 120mmLength: 120mm(4.72 inch)Pin: 20 PinsCompatible camera:    Runcam Micro HDZero CameraRuncam HdZero Micro V2 CameraRunCam HDZero Nano Digital FPV Camera Compatible VTX:HDZero Whoop (TX5S.1)HDZero Race V2HDZero RaceHDZero  FreestyleHDZero Whoop LiteShark Byte TX5S.1 VTXShark Byte TX5M.1 VTXShark Byte TX5R.1 VTX IncludesHDZero MIPI Cable 120mm * 1

HDZero MIPI Cable 120mm - www.readymaderc.com

The HDZero MIPI Cable 120 is a digital HD video connector between HDZero series VTX and a MIPI camera. This 120mm MIPI cable is for use in freestyle frames with a rear mount.

Great for a footy build!

Specifications

&ampnbsp

&ampnbsp



Model:
    HDZero MIPI Cable 80mm


Length:
    80mm(3.15 inch)


Pin:
    20 Pins


Compatible camera:
    Runcam Micro HDZero Camera

RunCam Nano Digital FPV Camera


Compatible VTX:
    Shark Byte TX5S.1 VTX

Shark Byte TX5M.1 VTX

Shark Byte TX5R.1 VTX

HDZero MIPI Cable 120mm | Five33

Description The HDZero MIPI Cable 80is a digital HD video connector between HDZero series VTX and a MIPI camera. This 80mm MIPI cable is for use in FPV wings and middle drones. Specifications  &#009&#009&#009&#009&#009&#009Model:&#009&#009&#009    HDZero MIPI Cable 80mm &#009&#009&#009&#009&#009&#009&#009Length:&#009&#009&#009    80mm(3.15 inch)&#009&#009&#009&#009&#009&#009&#009Pin:&#009&#009&#009    20 Pins&#009&#009&#009&#009&#009&#009&#009Compatible camera:&#009&#009&#009&#009&#009&#009    Runcam Micro HDZero Camera&#009&#009&#009    RunCam Nano Digital FPV Camera &#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Compatible VTX:&#009&#009&#009&#009&#009&#009    Shark Byte TX5S.1 VTX&#009&#009&#009    Shark Byte TX5M.1 VTX&#009&#009&#009    Shark Byte TX5R.1 VTX &#009&#009&#009&#009&#009&#009 IncludesHDZero MIPI Cable 80mm * 1

Description The HDZero MIPI Cable 80is a digital HD video connector between HDZero series VTX and a MIPI camera. This 80mm MIPI cable is for use in FPV wings and middle drones. Specifications  						Model:			    HDZero MIPI Cable 80mm 							Length:			    80mm(3.15 inch)							Pin:			    20 Pins							Compatible camera:						    Runcam Micro HDZero Camera			    RunCam Nano Digital FPV Camera 										Compatible VTX:						    Shark Byte TX5S.1 VTX			    Shark Byte TX5M.1 VTX			    Shark Byte TX5R.1 VTX 						 IncludesHDZero MIPI Cable 80mm * 1

HDZero MIPI Cable 80mm | HDZERO

HDZero MIPI Cable 80mm

The HDZero MIPI Cable 40mm is a digital HD video connector between HDZero series VTX and a MIPI camera. This short MIPI cable is for use in compact builds like whoop, toothpick, and racing frames.

&ampnbsp

Great for a TinyTrainer!

HDZero MIPI Cable 40mm | Five33

Description The HDZero MIPI Cable 250mm is a digital HD video connector between HDZero series VTX and a MIPI camera.  This extra long MIPI cable is for use in FPV wings and longer drones, where positioning the VTX further from the camera is desirable.  Specifications &#009&#009&#009&#009&#009&#009Model: &#009&#009&#009    HDZero MIPI Cable 250mm&#009&#009&#009&#009&#009&#009&#009Length:&#009&#009&#009    250mm(9.84 inch)&#009&#009&#009&#009&#009&#009&#009Pin:&#009&#009&#009    20 Pins&#009&#009&#009&#009&#009&#009&#009Compatible camera:&#009&#009&#009&#009&#009&#009    Runcam Micro HDZero Camera&#009&#009&#009    RunCam Nano Digital FPV Camera&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Compatible VTX:&#009&#009&#009&#009&#009&#009    Shark Byte TX5S.1 VTX&#009&#009&#009    Shark Byte TX5M.1 VTX&#009&#009&#009    Shark Byte TX5R.1 VTX&#009&#009&#009&#009&#009&#009Includes HDZero MIPI Cable 250mm * 1 

Description The HDZero MIPI Cable 250mm is a digital HD video connector between HDZero series VTX and a MIPI camera.  This extra long MIPI cable is for use in FPV wings and longer drones, where positioning the VTX further from the camera is desirable.  Specifications 						Model: 			    HDZero MIPI Cable 250mm							Length:			    250mm(9.84 inch)							Pin:			    20 Pins							Compatible camera:						    Runcam Micro HDZero Camera			    RunCam Nano Digital FPV Camera										Compatible VTX:						    Shark Byte TX5S.1 VTX			    Shark Byte TX5M.1 VTX			    Shark Byte TX5R.1 VTX						Includes HDZero MIPI Cable 250mm * 1 

HDZero MIPI Cable 250mm | HDZERO

Description The HDZero MIPI Cable 40mm is a digital HD video connector between HDZero series VTX and a MIPI camera. This short MIPI cable is for use in compact builds like whoop, toothpick, and racing frames. Specifications  &#009&#009&#009&#009&#009&#009Model:&#009&#009&#009    HDZero MIPI Cable 40mm&#009&#009&#009&#009&#009&#009&#009Length:&#009&#009&#009    40mm(1.6 inch)&#009&#009&#009&#009&#009&#009&#009Pin: &#009&#009&#009&#009&#009&#009    20 Pins&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Compatible camera:&#009&#009&#009&#009&#009&#009    Runcam Micro HDZero Camera&#009&#009&#009    RunCam Nano Digital FPV Camera&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Compatible VTX:&#009&#009&#009&#009&#009&#009    Shark Byte TX5S.1 VTX&#009&#009&#009    Shark Byte TX5M.1 VTX&#009&#009&#009    Shark Byte TX5R.1 VTX&#009&#009&#009&#009&#009&#009Includes HDZero MIPI Cable 40mm * 1 

Description The HDZero MIPI Cable 40mm is a digital HD video connector between HDZero series VTX and a MIPI camera. This short MIPI cable is for use in compact builds like whoop, toothpick, and racing frames. Specifications  						Model:			    HDZero MIPI Cable 40mm							Length:			    40mm(1.6 inch)							Pin: 						    20 Pins										Compatible camera:						    Runcam Micro HDZero Camera			    RunCam Nano Digital FPV Camera										Compatible VTX:						    Shark Byte TX5S.1 VTX			    Shark Byte TX5M.1 VTX			    Shark Byte TX5R.1 VTX						Includes HDZero MIPI Cable 40mm * 1 

HDZero MIPI Cable 40mm | HDZERO

The HDZero MIPI Cable 80is a digital HD video connector between HDZero series VTX and a MIPI camera. This 80mm MIPI cable is for use in FPV wings and middle drones.

Great for a switchbakc build!

Specifications

&ampnbsp

&ampnbsp



Model:
    HDZero MIPI Cable 80mm


Length:
    80mm(3.15 inch)


Pin:
    20 Pins


Compatible camera:
    Runcam Micro HDZero Camera

RunCam Nano Digital FPV Camera


Compatible VTX:
    Shark Byte TX5S.1 VTX

Shark Byte TX5M.1 VTX

Shark Byte TX5R.1 VTX

HDZero MIPI Cable 80mm | Five33

Divimath

HDZero MIPI Camera Cable - Choose Length from WREKD Co.

The HDZero MIPI Cable 250mm is a digital HD video connector between HDZero series VTX and a MIPI camera.  This extra long MIPI cable is for use in FPV wings and longer drones, where positioning the VTX further from the camera is desirable. 

HDZero MIPI Cable 250mm - RMRC

DescriptionThe HDZero MIPI Cable 80is a digital HD video connector between HDZero series VTX and a MIPI camera. This 80mm MIPI cable is for use in FPV wings and middle drones.SpecificationsModel: HDZero MIPI Cable 80mmLength: 80mm(3.15 inch)Pin: 20 PinsCompatible camera:    Runcam Micro HDZero CameraRuncam HdZero Micro V2 CameraRunCam HDZero Nano Digital FPV Camera Compatible VTX:HDZero Whoop (TX5S.1)HDZero Race V2HDZero RaceHDZero  FreestyleHDZero Whoop LiteShark Byte TX5S.1 VTXShark Byte TX5M.1 VTXShark Byte TX5R.1 VTX IncludesHDZero MIPI Cable 80mm * 1

HDZero MIPI Cable 80mm - www.readymaderc.com

BetaFPV

BetaFPV BT2.0 to PH2.0 1S Whoop Adapter Cable 6 Pack

BT2.0 Connector - the most significant revolution in 1S Tiny Whoop Drone. To provide our customers with the greatest convenience, we specially made this adapter cable, this adapter cable will be a perfect solution when you want to charge your BT2.0 300mAh 1S battery with a PH2.0 charger. Check out all our Connectors an

BETAFPV BT2.0-PH2.0 Charging Adapter Cable (6pcs)

BETAFPV

BT2.0 Connector - the most significant revolution in 1S Whoop Drone! 
To provide our customers with greatest convenience, we specially made this adapter cable, this adapter cable will be a perfect solution when you want to charge the BT2.0 300 mAh 1S battery with the PH 2.0 charger. We also carry BT2.0 pigtails and connectors for converting your whoops!Check out all our pigtails, connectors and adapters as well as our range of BetaFPV gear!
Not sure if it's worth to switch BT2.0? Check more from Joshua Bardwell video- Proof that BT2.0 connector is better than PH 2.0

Features


Conversion from PH2.0 connector to BT2.0 connector can be achieved with just one Adapter Cable, which convenient for charge the BT 2.0 battery with the PH 2.0 charger. 

 
Specifications

Item: BT2.0-PH2.0 Adapter Cable 
Length: 55mm (Not included the plug)
Weight: 1.07g(1 pcs)
Wire Type: 22AWG
Input Port: PH2.0 male connector（connect PH2.0 charger）
Output Port: BT2.0 female connector（connect BT2.0 battery）
Note: Blue represents the positive pole (+) White represents the negative pole(-)

Includes

6x BetaFPV BT2.0 to PH2.0 1S Whoop Adapter Cable





BT2.0 Connector - the most significant revolution in 1S Whoop Drone!  To provide our customers with greatest convenience, we specially made this adapter cable, this adapter cable will be a perfect solution when you want to charge the BT2.0 300 mAh 1S battery with the PH 2.0 charger. We also carry BT2.0 pigtails and con

This adapter cable allows you to charge your BT2.0 batteries with PH2.0 chargers!

BT2.0 Connector - the most significant revolution in 1S Tiny Whoop Drone.
To provide our customers with the greatest convenience, we specially made this adapter cable, this adapter cable will be a perfect solution when you want to charge your BT2.0 300mAh 1S battery with a PH2.0 charger.
Features

BT2.0 connector decreased internal resistance of connector effectively by upgrading the crimped pins to 1.0mm banana connector and increasing the cross-sectional area of 1.0mm banana connector.
BT2.0 connector supports 9A continuous current and 15A burst, while the PH2.0 connector supports 4.5A continuous current. Brings more perfect flight experience when you fly the 1S brushless whoop drone.
By using the BT2.0 connector, it can solve the problem of voltage sag, the discharge of the 1S lipo battery becomes more efficient. Pilots can enjoy more flight time without disturbance of low voltage warning.
Compared with the PH2.0 crimped pins, BT2.0 1.0mm banana connector is more durable which can discharge more currents in the same capacity and provide far more power. You can get 2mins flight time in full throttle if you use our BT2.0 300mah 1S battery on Meteor65.
Conversion from PH2.0 connector to BT2.0 connector can be achieved with just one Adapter Cable, which convenient for charge the BT 2.0 battery with the PH 2.0 charger.

Specifications

Item: BT2.0-PH2.0 Adapter Cable 
Length: 55mm (Not included the plug)
Weight: 1.07g(1 pcs)
Wire Type: 22AWG
Input Port: PH2.0 male connector（connect PH2.0 charger）
Output Port: BT2.0 female connector（connect BT2.0 battery）
Note: Blue represents the positive pole (+) White represents the negative pole(-)

Includes

6 * BT2.0-PH2.0 Adapter Cable






BT2.0 Connector - the most significant revolution in 1S Tiny Whoop Drone. To provide our customers with the greatest convenience, we specially made this adapter cable, this adapter cable will be a perfect solution when you want to charge your BT2.0 300mAh 1S battery with a PH2.0 charger. Features BT2.0 connector decrea

BETAFPV BT2.0-PH2.0 Charging Adapter Cable (6pcs) from WREKD Co.

BT2.0 Connector - the most significant revolution in 1S Whoop Drone! 
To provide our customers with greatest convenience, we specially made this adapter cable, this adapter cable will be a perfect solution when you want to charge the BT2.0 300 mAh 1S battery with the PH 2.0 charger. We also carry BT2.0 pigtails and connectors for converting your whoops!Check out all our pigtails, connectors and adapters as well as our range of BetaFPV gear!
Not sure if it&#39s worth to switch BT2.0? Check more from Joshua Bardwell video- Proof that BT2.0 connector is better than PH 2.0

Features


Conversion from PH2.0 connector to BT2.0 connector can be achieved with just one Adapter Cable, which convenient for charge the BT 2.0 battery with the PH 2.0 charger. 

 
Specifications

Item: BT2.0-PH2.0 Adapter Cable 
Length: 55mm (Not included the plug)
Weight: 1.07g(1 pcs)
Wire Type: 22AWG
Input Port: PH2.0 male connector（connect PH2.0 charger）
Output Port: BT2.0 female connector（connect BT2.0 battery）
Note: Blue represents the positive pole (+) White represents the negative pole(-)

Includes

6x BetaFPV BT2.0 to PH2.0 1S Whoop Adapter Cable





BetaFPV BT2.0 to PH2.0 1S Whoop Adapter Cable 6 Pack from WREKD Co.

BetaFPV BT2.0 1S Whoop Pigtail Cable 6 Pack

BT2.0 Connector - the most significant revolution in 1S Tiny Whoop Drone. BT2.0 1S whoop cable pigtail is an option for you to modify your drone or your 1S FC board which is with the PH2.0 connector. With the 1.0mm banana connectors, it can support 9A continuous current and 15A burst. Makes the best potential of brushl

BETAFPV BT2.0 Power Whoop Connector Cable (6pcs)

BT2.0 Connector - the most significant revolution in 1S Tiny Whoop Drone.
BT2.0 1S whoop cable pigtail is an option for you to modify your drone or your 1S FC board which is with the PH2.0 connector. With the 1.0mm banana connectors, it can support 9A continuous current and 15A burst. Makes the best potential of brushless whoop drone, and display the perfect performance of your drone with BT2.0 300mAh 1S battery.
Features

BT2.0 connector decreased internal resistance of connector effectively by upgrading the crimped pins to 1.0mm banana connector and increasing the cross-sectional area of 1.0mm banana connector.
BT2.0 connector supports 9A continuous current and 15A burst, while the PH2.0 connector supports 4.5A continuous current. Brings more perfect flight experience when you fly the 1S brushless whoop drone.
By using the BT2.0 connector, it can solve the problem of voltage sag, the discharge of the 1S lipo battery becomes more efficient. Pilots can enjoy more flight time without disturbance of low voltage warning.
With the light and customized 22AWG wire, it will make the drone lighter. The wire uses US standard core 0.08mm*60. The diameter of the silicone outer layer is only 1.5mm, which is 0.2mm thinner than 22AWG standard wire.

Specifications

Item: BT2.0 1S Whoop Cable Pigtail
Wire Type: 22AWG
Connect: BT2.0 Male Connector
Length: 55mm (Not included the plug)
Weight: 0.91g/pc
Battery: BT2.0 300mAh 1S Battery
FC: F4 1S Brushless FC


How to Resolder Your Board with BT2.0 Cable
BT2.0 1S Whoop Cable Pigtail is composed of blue wire and white wire. The blue wire is the positive pole(+), the white wire is the negative pole(-). When you resolder your board, please pay attention to the connection method.

Includes

6 x BT2.0 1S Whoop Drone Female Power Cable





BETAFPV BT2.0 Power Whoop Connector Cable (6pcs) from WREKD Co.

BT2.0 Connector - the most significant revolution in 1S Tiny Whoop Drone, like the&nbspBETAFPV Metor65.

BT2.0 Connector - the most significant revolution in 1S Tiny Whoop Drone, like the BETAFPV Metor65.

BT2.0 Connector - the most significant revolution in 1S Whoop Drone! 
BT2.0 1S whoop cable pigtail is an option for you to modify your drone or your 1S FC board which is with the PH2.0 connector. With the 1.0mm banana connectors, it can support 9A continuous current and 15A burst. Makes the best potential of brushless whoop drone, and display the perfect performance of your drone with BT2.0 300mAh 1S battery.Check out all our pigtails, connectors and adapters as well as our range of BetaFPV gear!
Not sure if it&#39s worth to switch BT2.0? Check more from Joshua Bardwell&#39video- Proof that BT2.0 connector is better than PH 2.0

Features


BT2.0 connector decreased internal resistance of connector effectively by upgrading the crimped pins to 1.0mm banana connector and increasing the cross-sectional area of 1.0mm banana connector.
BT2.0 connector supports 9A continuous current and 15A burst, while the PH2.0 connector supports 4.5A continuous current. Brings more perfect flight experience when you fly the 1S brushless whoop drone.
By using the BT2.0 connector, it can solve the problem of voltage sag, the discharge of the 1S lipo battery becomes more efficient. Pilots can enjoy more flight time without disturbance of low voltage warning. 
With the light and customized 22AWG wire, it will make the drone more lighter. The wire uses US standard core 0.08mm*60. The diameter of silicone outer layer is only 1.5mm, which is 0.2mm thinner than 22AWG standard wire.

There is a graph of comparison between BT2.0 connector and PH2.0 connector (solid pins version) in BETAFPV 1S 300mAh battery. The discharge current is 9A in this testing. You could see that it has double time (about 2minutes) with BT2.0 connector.

Specifications

Item: BT2.0 1S Whoop Cable Pigtail
Wire Type: 22AWG
Connect: BT2.0 Male Connector
Length: 55mm (Not included the plug)
Weight: 0.91g/pc


Includes

6x BetaFPV BT2.0 1S Whoop Pigtail Cable


How to re-solder your FC pigtail
BT2.0 1S Whoop Cable Pigtail is composed of blue wire and white wire. The blue wire is the positive pole(+), the white wire is the negative pole(-). When you resolder your board, please pay attention to the connection method.

Here is Mr ShutterBug&#39vedio to show you the way of replacing connectors safely.





BT2.0 Connector - the most significant revolution in 1S Whoop Drone!  BT2.0 1S whoop cable pigtail is an option for you to modify your drone or your 1S FC board which is with the PH2.0 connector. With the 1.0mm banana connectors, it can support 9A continuous current and 15A burst. Makes the best potential of brushless 

BetaFPV BT2.0 1S Whoop Pigtail Cable 6 Pack from WREKD Co.

BT2.0 1S whoop cable pigtail is an option for you to modify your drone or your 1S FC board which is with the PH2.0 connector. With the 1.0mm banana connectors, it can support 9A continuous current and 15A burst. Makes the best potential of a brushless whoop drone, and displays the perfect performance of your drone with a BT2.0 300mAh 1S battery.
Specifications

Wire Gauge: 22AWG
Connector: BT2.0 (male)
Length: 55mm
Weight: 0.91g
Maximum Input Voltage: 1s

Includes

6x BetaFPV BT2.0 Whoop Pigtails


BT2.0 1S whoop cable pigtail is an option for you to modify your drone or your 1S FC board which is with the PH2.0 connector. With the 1.0mm banana connectors, it can support 9A continuous current and 15A burst. Makes the best potential of a brushless whoop drone, and displays the perfect performance of your drone with a BT2.0 300mAh 1S battery. Specifications Wire Gauge: 22AWG Connector: BT2.0 (male) Length: 55mm Weight: 0.91g Maximum Input Voltage: 1s Includes 6x BetaFPV BT2.0 Whoop Pigtails

BetaFPV BT2.0 Whoop Pigtails 6 Pack

BetaFPV BT2.0 1S Whoop Connector Male/Female Set 5 Pack

BT2.0 Connector - the most significant revolution in 1S Whoop Drone! 
BT2.0 1S Whoop Connector is an option for you to modify your existing batteries and drones which use the PH2.0 connector. With the 1.0mm banana connectors, it can support 9A continuous current and 15A burst. Makes the best potential of brushless whoop drone, and display the perfect performance of your drone with BT2.0 300mAh 1S battery.Check out all our pigtails, connectors and adapters as well as our range of BetaFPV gear!
Not sure if it's worth to switch BT2.0? Check more from Joshua Bardwell'video- Proof that BT2.0 connector is better than PH 2.0

Features


BT2.0 connector decreased internal resistance of connector effectively by upgrading the crimped pins to 1.0mm banana connector and increasing the cross-sectional area of 1.0mm banana connector.
BT2.0 connector supports 9A continuous current and 15A burst, while the PH2.0 connector supports 4.5A continuous current. Brings more perfect flight experience when you fly the 1S brushless whoop drone.
By using the BT2.0 connector, it can solve the problem of voltage sag, the discharge of the 1S lipo battery becomes more efficient. Pilots can enjoy more flight time without disturbance of low voltage warning. 
With the light and customized 22AWG wire, it will make the drone more lighter. The wire uses US standard core 0.08mm*60. The diameter of silicone outer layer is only 1.5mm, which is 0.2mm thinner than 22AWG standard wire.

There is a graph of comparison between BT2.0 connector and PH2.0 connector (solid pins version) in BETAFPV 1S 300mAh battery. The discharge current is 9A in this testing. You could see that it has double time (about 2minutes) with BT2.0 connector.

Specifications

Size: Male Connector - 6.0*4.2*10.5mm / Female Connector - 6.0*4.2*8.3mm 

Weight: Male Connector- 0.34g/PCS / Female Connector - 0.24g/PCS

Note: The terminal molded case identifies the positive and negative poles, and must be welded according to the instructions.

Includes

5x BetaFPV BT2.0 1S Whoop Connector Male

5x BetaFPV BT2.0 1S Whoop Connector Female 

Here is Mr ShutterBug'vedio to show you the way of replacing connectors safely.





BT2.0 Connector - the most significant revolution in 1S Whoop Drone!  BT2.0 1S Whoop Connector is an option for you to modify your existing batteries and drones which use the PH2.0 connector. With the 1.0mm banana connectors, it can support 9A continuous current and 15A burst. Makes the best potential of brushless whoo

BT2.0 Connector - the most significant revolution in 1S Whoop Drone! 
BT2.0 1S Whoop Connector is an option for you to modify your existing batteries and drones which use the PH2.0 connector. With the 1.0mm banana connectors, it can support 9A continuous current and 15A burst. Makes the best potential of brushless whoop drone, and display the perfect performance of your drone with BT2.0 300mAh 1S battery.Check out all our pigtails, connectors and adapters as well as our range of BetaFPV gear!
Not sure if it&#39s worth to switch BT2.0? Check more from Joshua Bardwell&#39video- Proof that BT2.0 connector is better than PH 2.0

Features


BT2.0 connector decreased internal resistance of connector effectively by upgrading the crimped pins to 1.0mm banana connector and increasing the cross-sectional area of 1.0mm banana connector.
BT2.0 connector supports 9A continuous current and 15A burst, while the PH2.0 connector supports 4.5A continuous current. Brings more perfect flight experience when you fly the 1S brushless whoop drone.
By using the BT2.0 connector, it can solve the problem of voltage sag, the discharge of the 1S lipo battery becomes more efficient. Pilots can enjoy more flight time without disturbance of low voltage warning. 
With the light and customized 22AWG wire, it will make the drone more lighter. The wire uses US standard core 0.08mm*60. The diameter of silicone outer layer is only 1.5mm, which is 0.2mm thinner than 22AWG standard wire.

There is a graph of comparison between BT2.0 connector and PH2.0 connector (solid pins version) in BETAFPV 1S 300mAh battery. The discharge current is 9A in this testing. You could see that it has double time (about 2minutes) with BT2.0 connector.

Specifications

Size: Male Connector - 6.0*4.2*10.5mm / Female Connector - 6.0*4.2*8.3mm 

Weight: Male Connector- 0.34g/PCS / Female Connector - 0.24g/PCS

Note: The terminal molded case identifies the positive and negative poles, and must be welded according to the instructions.

Includes

5x BetaFPV BT2.0 1S Whoop Connector Male

5x BetaFPV BT2.0 1S Whoop Connector Female 

Here is Mr ShutterBug&#39vedio to show you the way of replacing connectors safely.





BetaFPV BT2.0 1S Whoop Connector Male/Female Set 5 Pack from WREKD Co.

EMAX

EMAX PH2.0 Series/Dual Connector Power Lead

EMAX PH2.0 Series/Dual Connector Power Lead Use 2x TinyHawk 1S 450mAh lipo batteries as a 2S lipo. Replacement part for drones such as the TinyHawk Freestyle, TinyHawk II Race, etc.Checkout all our 1S batteries and our Emax Collection!Package Includes:1 x EMAX PH2.0 Series/Dual Connector Power Lead

EMAX Tinyhawk Freestyle - PH2.0 Dual Connector Power Lead

Emax USA

EMAX PH2.0 Series/Dual Connector Power Lead

Use 2x TinyHawk 1S 450mAh lipo batteries as a 2S lipo.

Replacement part for drones such as the TinyHawk Freestyle, TinyHawk II Race, etc.

EMAX PH2.0 Series/Dual Connector Power Lead Use 2x TinyHawk 1S 450mAh lipo batteries as a 2S lipo. Replacement part for drones such as the TinyHawk Freestyle, TinyHawk II Race, etc.

EMAX PH2.0 Series/Dual Connector Power Lead from WREKD Co.

RG316 Coaxial Cable

Perfect for repairing or modifying your quad equipment. 
RG316 is commonly used for TX and VTX antennas.
Check out all of our tools and building supplies as well.
Includes

1x 1 Foot of RG316 Coaxial Cable by the Foot


Perfect for repairing or modifying your quad equipment.  RG316 is commonly used for TX and VTX antennas. Check out all of our tools and building supplies as well. Includes 1x 1 Foot of RG316 Coaxial Cable by the Foot

RG316 Coaxial Cable by the Foot from WREKD Co.

RG316 Coaxial Cable by the Foot

RF113 Coaxial Cable

Perfect for repairing or modifying your quad equipment. 
RF113 is commonly used for RX antennas.
Check out all of our tools and building supplies as well.
Includes

1x 1 Foot of RF113 Coaxial Cable by the Foot


Perfect for repairing or modifying your quad equipment.  RF113 is commonly used for RX antennas. Check out all of our tools and building supplies as well. Includes 1x 1 Foot of RF113 Coaxial Cable by the Foot

RF113 Coaxial Cable by the Foot from WREKD Co.

RF113 Coaxial Cable by the Foot

DJI Digital FPV Air Unit 3in1 Cable

<p><span style="color: #ff2a00"><strong>Except for DJI Air Unit, all other DJI products will be shipped within 7 days after payment.</strong></span></p>
<p> </p>
<ul>
<li>
<div class="temp-specs-tr">
<div class="temp-specs-td name">Overview</div>
<div class="temp-specs-td value">The 3-in-1 cable connects quickly to the air unit module port. The power cable and signal cable are both marked in different colors.<br>
</div>
</div>
<div class="temp-specs-tr">
<div class="temp-specs-td name">Highlights</div>
<div class="temp-specs-td value">Easy modular assembly and disassembly, lightweight design.<br>
</div>
</div>
<div class="temp-specs-tr">
<div class="temp-specs-td name">Tips</div>
<div class="temp-specs-td value">Refer to the user manual for wiring instructions.<br>
</div>
</div>
<div class="temp-specs-tr">
<div class="temp-specs-td name">In The Box</div>
<div class="temp-specs-td value">DJI FPV Air Unit 3-in-1 Cable × 1<br>
</div>
</div>
<div class="temp-specs-tr">
<div class="temp-specs-td name">Specifications</div>
<div class="temp-specs-td value">Length: 205 mm (without terminal)<br>
</div>
</div>
<div class="temp-specs-tr">
<div class="temp-specs-td name">Compatibility</div>
<div class="temp-specs-td value">DJI FPV Air Unit</div>
</div>
</li>
</ul>

Overview The 3-in-1 cable connects quickly to the air unit module port. Participate in our game and get up to 20$ discount,The power cable and signal cable are both marked in different colors. Highlights Easy modular assembly and disassembly, lightweight design. Tips Refer to the user manual for wiring instructions. In The Box DJI FPV Air Unit 3-in-1 Cable × 1 Specifications Length: 205 mm (without terminal) Compatibility DJI FPV Air Unit

DJI FPV Air Unit 3-in-1 Cable – CADDX FPV

Except for DJI Air Unit, all other DJI products will be shipped within 7 days after payment.
 



Overview
The 3-in-1 cable connects quickly to the air unit module port. The power cable and signal cab

DJI FPV Air Unit 3-in-1 Cable

Spare replacement 3in1 Cable for the DJI Digital FPV Air Unit
The 3-in-1 cable connects quickly to the air unit module port. The power cable and signal cable are both marked in different colors.
See all our DJI FPV System Parts &amp Accessories!
Specifications

Length: 205 mm (without terminal)

Includes

1x DJI FPV Air Unit 3in1 Cable


Spare replacement 3in1 Cable for the DJI Digital FPV Air Unit The 3-in-1 cable connects quickly to the air unit module port. The power cable and signal cable are both marked in different colors. See all our DJI FPV System Parts &amp; Accessories! Specifications Length: 205 mm (without terminal) Includes 1x DJI FPV Air 

Replacement 3-in-1 cable for the DJI FPV Air Unit. 

Spare replacement 3in1 Cable for the DJI Digital FPV Air Unit
The 3-in-1 cable connects quickly to the air unit module port. The power cable and signal cable are both marked in different colors.
See all our DJI FPV System Parts &ampamp Accessories!
Specifications

Length: 205 mm (without terminal)

Includes

1x DJI FPV Air Unit 3in1 Cable


DJI Digital FPV Air Unit 3in1 Cable from WREKD Co.

Replacement 3-in-1 cable for the DJI FPV Air Unit. The 3-in-1 cable connects quickly to the air unit module port. The power cable and signal cable are both marked in different colors.
Specifications

 	Length: 205mm

Includes

 	DJI FPV Air Unit 3-in-1 Cable x 1

Replacement 3-in-1 cable for the DJI FPV Air Unit. The 3-in-1 cable connects quickly to the air unit module port. The power cable and signal cable are both marked in different colors. Specifications Length: 205mm Includes DJI FPV Air Unit 3-in-1 Cable x 1

DJI FPV Air Unit 3-in-1 Cable - GEPRC

DJI Digital FPV Air Unit Coaxial Cable

Caddx


The coaxial cable can be quickly installed to the camera's back cover and the air unit module.






Easy modular assembly and disassembly, lightweight design.
Very thin coaxial cable is used with the exposed part wrapped by TPU to improve bending and wear resistance.




Specifications


Length: 100 mm (without terminal, trailer card and back cover)
Compatibility: DJI FPV Air Unit

DJI FPV Air Unit Coaxial Cable × 1



The coaxial cable can be quickly installed to the camera's back cover and the air unit module. Easy modular assembly and disassembly, lightweight design. Very thin coaxial cable is used with the exposed part wrapped by TPU to improve bending and wear resistance. Specifications Length: 100 mm (without terminal, trailer card and back cover) Compatibility: DJI FPV Air Unit DJI FPV Air Unit Coaxial Cable × 1

DJI FPV Air Unit Coaxial Cable

The DJI Digital FPV Air Unit Coaxial Cable is a spare replacement for the Air Unit &amp; Camera Module. You can view all our DJI Air Unit products &amp; accessories here.   Specifications Length: 100 mm (without terminal, trailer card and back cover)  Includes 1x DJI FPV Air Unit Coaxial Cable

Wiring, Adapters and Cables