FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

EMAX

EMAX RTF Tinyhawk III Plus Analog Whoop - 2.4GHz ELRS

All products containing batteries must be shipped by a ground shipping method.
The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers' feedback and made significant enhancements, including the incorporation of ExpressLRS technology. This is truly the ideal way to try out FPV!  
The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision.
This is an ideal way for beginners to enter the FPV scene. With this RTF kit, you will get a Tinyhawk 3 Plus Analog BNF, EMAX E8 Transmitter (ELRS-2.4G), EMAX Transporter 2 Analog Goggles, EMAX 1S HV 650mAh battery, USB Battery charger prop, and hardware.
Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection!




Specifications
TINYHAWK 3 PLUS ANALOG

Wheelbase: 76mm

Weight: 32.5g

Motor: TH0802 II - 15000KV

Propellers: Avia Tinyhawk

Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G)

Camera: Runcam Nano

VTX: 32Bit 40Ch 0/25mW/100mW/400mW

Battery: 1S 650mAh

E8 TRANSMITTER (ELRS-2.4G)

Dimensions: LxWxH=150x140x45mm

Weight: 260g

Channels: 8

Protocol: ELRS 2.4G

Band: 2.4gHz（2400-2483.5MHz）

Power Levels: 10mW/25mW/50mW/100mW

Battery: 800mAh 18650

Charging: USB-C 1A Recommended

Operating Voltage: 3.7-4.2V

Input: Type-C, 3.5mm

TRANSPORTER 2 ANALOG GOGGLES

Dimensions: LxWxH=155x100x90mm

Weight: 398g

Screen Resolution: 480x800

Screen Size: 4.3 Inch

Battery: 1300mAh Integrated

Operating Voltage: 3.7V-4.2V

Band: 5.8GHz（5658-5945MHz）

Charging: USB-C 1A Recommended

DVR: 32GB Micro SD Recommended Modes: VGA/D1

Includes

1x Tinyhawk 3 Plus Analog BNF

1x EMAX E8 Transmitter (ELRS-2.4G)

1x EMAX Transporter 2 Analog Goggles

1x EMAX 1S HV 650mAh Battery

1x Hardware Kit

1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW)

1x USB Battery Charger

1x Monitor to Transmitter Mounting Kit


The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers' feedback and made significant enhancements, including the incorporation of ExpressLRS technology and HDZero advancements in transmission. This is truly the ideal way to try out FPV! The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision. This is an ideal way for beginners to enter the FPV scene. With this RTF kit, you will get a Tinyhawk 3 Plus Analog BNF, EMAX E8 Transmitter (ELRS-2.4G), EMAX Transporter 2 Analog Goggles, 2 EMAX 1S HV 650mAh battery, USB Battery charger prop, and hardware. Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection! Specifications TINYHAWK 3 PLUS ANALOG Wheelbase: 76mm Weight: 32.5g Motor: TH0802 II - 15000KV Propellers: Avia Tinyhawk Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G) Camera: Runcam Nano VTX: 32Bit 40Ch 0/25mW/100mW/400mW Battery: 1S 650mAh E8 TRANSMITTER (ELRS-2.4G) Dimensions: LxWxH=150x140x45mm Weight: 260g Channels: 8 Protocol: ELRS 2.4G Band: 2.4gHz（2400-2483.5MHz） Power Levels: 10mW/25mW/50mW/100mW Battery: 800mAh 18650 Charging: USB-C 1A Recommended Operating Voltage: 3.7-4.2V Input: Type-C, 3.5mm TRANSPORTER 2 ANALOG GOGGLES Dimensions: LxWxH=155x100x90mm Weight: 398g Screen Resolution: 480x800 Screen Size: 4.3 Inch Battery: 1300mAh Integrated Operating Voltage: 3.7V-4.2V Band: 5.8GHz（5658-5945MHz） Charging: USB-C 1A Recommended DVR: 32GB Micro SD Recommended Modes: VGA/D1 Includes 1x Tinyhawk 3 Plus Analog BNF 1x EMAX E8 Transmitter (ELRS-2.4G) 1x EMAX Transporter 2 Analog Goggles 2x EMAX 1S HV 650mAh Battery 1x Hardware Kit 1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW) 1x USB Battery Charger 1x Monitor to Transmitter Mounting Kit

EMAX RTF Tinyhawk III Plus Whoop Ready-to-Fly ELRS 2.4GHz Analog Kit w/ Goggles, Radio Transmitter, Batteries, Charger, and Drone

EMAX RTF Tinyhawk III Plus Whoop Ready to Fly ELRS 2.4GHz Analog Kit w/ Goggles, Radio Transmitter, Batteries, Charger, Case and Drone

The EMAX Tinyhawk III Plus Analog Bundle is your gateway to an exhilarating FPV drone experience.&nbsp

The EMAX Tinyhawk III Plus Analog Bundle is your gateway to an exhilarating FPV drone experience. 

EMAX TinyHawk III Plus RTF Bundle - Analog w/ Goggles + Radio

Emax

All products containing batteries must be shipped by a ground shipping method.
The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers&#39 feedback and made significant enhancements, including the incorporation of ExpressLRS technology. This is truly the ideal way to try out FPV!  
The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision.
This is an ideal way for beginners to enter the FPV scene. With this RTF kit, you will get a Tinyhawk 3 Plus Analog BNF, EMAX E8 Transmitter (ELRS-2.4G), EMAX Transporter 2 Analog Goggles, 2  EMAX 1S HV 650mAh battery, USB Battery charger prop, and hardware.
Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection!




Specifications
TINYHAWK 3 PLUS ANALOG

Wheelbase: 76mm

Weight: 32.5g

Motor: TH0802 II - 15000KV

Propellers: Avia Tinyhawk

Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G)

Camera: Runcam Nano

VTX: 32Bit 40Ch 0/25mW/100mW/400mW

Battery: 1S 650mAh

E8 TRANSMITTER (ELRS-2.4G)

Dimensions: LxWxH=150x140x45mm

Weight: 260g

Channels: 8

Protocol: ELRS 2.4G

Band: 2.4gHz（2400-2483.5MHz）

Power Levels: 10mW/25mW/50mW/100mW

Battery: 800mAh 18650

Charging: USB-C 1A Recommended

Operating Voltage: 3.7-4.2V

Input: Type-C, 3.5mm

TRANSPORTER 2 ANALOG GOGGLES

Dimensions: LxWxH=155x100x90mm

Weight: 398g

Screen Resolution: 480x800

Screen Size: 4.3 Inch

Battery: 1300mAh Integrated

Operating Voltage: 3.7V-4.2V

Band: 5.8GHz（5658-5945MHz）

Charging: USB-C 1A Recommended

DVR: 32GB Micro SD Recommended Modes: VGA/D1

Includes

1x Tinyhawk 3 Plus Analog BNF

1x EMAX E8 Transmitter (ELRS-2.4G)

1x EMAX Transporter 2 Analog Goggles

2x EMAX 1S HV 650mAh Battery

1x Hardware Kit

1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW)

1x USB Battery Charger

1x Monitor to Transmitter Mounting Kit


All products containing batteries must be shipped by a ground shipping method. The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers' feedback and made significant enhancements, including the incorporation of ExpressLRS technology. This is truly the idea

EMAX RTF Tinyhawk III Plus Whoop Ready-to-Fly ELRS 2.4GHz Analog Kit w/ Goggles, Radio Transmitter, Batteries, Charger, Case and Drone from WREKD Co.

EMAX RTF Tinyhawk III Plus Whoop Ready-to-Fly ELRS 2.4GHz Analog Kit w/ Goggles, Radio Transmitter, Batteries, Charger, Case and Drone

Pre-Built Quad Kit Type

Pre-Built Quads and Kits

Quad Frame Size

Quad Type

EMAX RTF Tinyhawk III Plus Whoop - HDZero, 2.4GHz ELRS

All products containing batteries must be shipped by a ground shipping method.
The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers' feedback and made significant enhancements, including the incorporation of ExpressLRS technology and HDZero advancements in transmission. This is truly the ideal way to try out FPV!  
The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision.
The HDZero variant elevates the FPV video experience to the next level. This cutting-edge digital transmission technology ensures crystal-clear video with low interference, providing a truly immersive and cinematic view while piloting Tinyhawk 3 Plus. 
This is an ideal way for beginners to enter the FPV scene. With this RTF kit, you will get a Tinyhawk 3 Plus HD BNF, EMAX E8 Transmitter (ELRS-2.4G), EMAX Transporter 2 HDZero Goggles, EMAX 1S HV 650mAh battery, USB Battery charger props, and hardware.
Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection!




Specifications
TINYHAWK 3 PLUS HDZERO

Wheelbase: 76mm

Weight: 35.5g

Motor: TH0802 II - 15000KV

Propellers: Avia Tinyhawk

Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G)

Camera: Runcam HDZero Nano Lite

VTX: HDZero Whoop Lite 0/25mW/200mW

Battery: 1S 650mAh

E8 TRANSMITTER (ELRS-2.4G)

Dimensions: LxWxH=150x140x45mm

Weight: 260g

Channels: 8

Protocol: ELRS 2.4G

Band: 2.4gHz（2400-2483.5MHz）

Power Levels: 10mW/25mW/50mW/100mW

Battery: 800mAh 18650

Charging: USB-C 1A Recommended

Operating Voltage: 3.7-4.2V

Input: Type-C, 3.5mm

TRANSPORTER 2 HD GOGGLES

Dimensions: LxWxH=155x100x90mm

Weight: 425g

Screen Resolution: 720x1080

Screen Size: 4.45 Inch

Battery: 2200mAh Integrated

Operating Voltage: 3.7V-4.2V

Band: Digital HDZero 5.8GHz（5658-5945MHz）

Charging: USB-C 1A Recommended

DVR: 32GB Micro SD Recommended

Includes

1x Tinyhawk 3 Plus HD BNF
1x EMAX E8 Transmitter (ELRS-2.4G)
1x EMAX Transporter 2 HDZero Goggles
1x EMAX 1S HV 650mAh Battery
1x Hardware Kit
1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW)
1x USB Battery Charger
1x Monitor to Transmitter Mounting Kit
1x HDZero Firmware Update Cable Kit


The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers' feedback and made significant enhancements, including the incorporation of ExpressLRS technology and HDZero advancements in transmission. This is truly the ideal way to try out FPV! The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision. The HDZero variant elevates the FPV video experience to the next level. This cutting-edge digital transmission technology ensures crystal-clear video with low interference, providing a truly immersive and cinematic view while piloting Tinyhawk 3 Plus. This is an ideal way for beginners to enter the FPV scene. With this RTF kit, you will get a Tinyhawk 3 Plus HD BNF, EMAX E8 Transmitter (ELRS-2.4G), EMAX Transporter 2 HDZero Goggles, 2 EMAX 1S HV 650mAh battery, USB Battery charger props, and hardware. Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection! Specifications TINYHAWK 3 PLUS HDZERO Wheelbase: 76mm Weight: 35.5g Motor: TH0802 II - 15000KV Propellers: Avia Tinyhawk Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G) Camera: Runcam HDZero Nano Lite VTX: HDZero Whoop Lite 0/25mW/200mW Battery: 1S 650mAh E8 TRANSMITTER (ELRS-2.4G) Dimensions: LxWxH=150x140x45mm Weight: 260g Channels: 8 Protocol: ELRS 2.4G Band: 2.4gHz（2400-2483.5MHz） Power Levels: 10mW/25mW/50mW/100mW Battery: 800mAh 18650 Charging: USB-C 1A Recommended Operating Voltage: 3.7-4.2V Input: Type-C, 3.5mm TRANSPORTER 2 HD GOGGLES Dimensions: LxWxH=155x100x90mm Weight: 425g Screen Resolution: 720x1080 Screen Size: 4.45 Inch Battery: 2200mAh Integrated Operating Voltage: 3.7V-4.2V Band: Digital HDZero 5.8GHz（5658-5945MHz） Charging: USB-C 1A Recommended DVR: 32GB Micro SD Recommended Includes 1x Tinyhawk 3 Plus HD BNF 1x EMAX E8 Transmitter (ELRS-2.4G) 1x EMAX Transporter 2 HDZero Goggles 2x EMAX 1S HV 650mAh Battery 1x Hardware Kit 1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW) 1x USB Battery Charger 1x Monitor to Transmitter Mounting Kit 1x HDZero Firmware Update Cable Kit

EMAX RTF Tinyhawk III Plus Whoop Ready-to-Fly ELRS 2.4GHz HDZero Kit w/ Goggles, Radio Transmitter, Batteries, Charger, and Drone

EMAX RTF Tinyhawk III Plus Whoop Ready to Fly ELRS 2.4GHz HDZero Kit w/ Goggles, Radio Transmitter, Batteries, Charger, Case and Drone

The EMAX Tinyhawk III Plus HDZERO Bundle is your gateway to an exhilarating FPV drone experience.&nbsp

The EMAX Tinyhawk III Plus HDZERO Bundle is your gateway to an exhilarating FPV drone experience. 

EMAX TinyHawk III Plus RTF Bundle - HDZero w/ Goggles + Radio

GEPRC

GEPRC BNF DarkStar20 HD Cinewhoop - DJI O3

GEPRC is leading the way in cinematic FPV innovation with the DarkStar20.

GEPRC DarkStar20 Cinewhoop HD w/ DJI O3

GEPRC BNF DarkStar20 HD Cinewhoop - Runcam Link

GEPRC DarkStar20 Cinewhoop HD w/ Runcam Wasp

EMAX BNF Tinyhawk III Plus HD Whoop - HDZero, 2.4GHz ELRS

The EMAX Tinyhawk III Plus BNF is your gateway to an exhilarating FPV drone experience.&nbsp

The EMAX Tinyhawk III Plus BNF is your gateway to an exhilarating FPV drone experience. 

EMAX TinyHawk III Plus BNF w/ ELRS - HDZero/Analog

All products containing batteries must be shipped by a ground shipping method.
The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers&#39 feedback and made significant enhancements, including the incorporation of ExpressLRS technology and HDZero advancements in transmission. This is truly the ideal way to try out FPV!  
The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision.
The HDZero variant elevates the FPV video experience to the next level. This cutting-edge digital transmission technology ensures crystal-clear video with low interference, providing a truly immersive and cinematic view while piloting Tinyhawk 3 Plus. 
Check out all our pre-built quads, and all our EMAX gear!

 Specifications

Wheelbase: 76mm

Weight: 35.5g

Motor: TH0802 II - 15000KV

Propellers: Avia Tinyhawk

Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G)

Camera: Runcam HDZero Nano Lite

VTX: HDZero Whoop Lite 0/25mW/200mW

Battery: 1S 650mAh

Includes

1x Tinyhawk 3 Plus HD BNF

1x EMAX 1S HV 650mAh Battery

1x Hardware Kit

1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW)

1x USB Battery Charger


All products containing batteries must be shipped by a ground shipping method. The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers' feedback and made significant enhancements, including the incorporation of ExpressLRS technology and HDZero advancements

EMAX BNF Tinyhawk III Plus Whoop 1-2S HD Racing Drone w/ HDZero Whoop Lite & Nano Cam Lite - ELRS 2.4 GHz from WREKD Co.

EMAX BNF Tinyhawk III Plus Whoop 1-2S HD Racing Drone w/ HDZero Whoop Lite & Nano Cam Lite - ELRS 2.4 GHz

EMAX Tinyhawk III Plus HDZero Bind-N-Fly BNF ELRS

The best quality First Person View equipment. Free or discounted shipping on all orders.Drone Racing, RC Airplanes, FPV Cameras, FPV Goggles, Video Transmitters, RC Quads, Drone Antennas, Lipo Batteries, and Ground Station Equipment.All available for amateurs, schools, hobbyists, government, and wholesale buyers.

EMAX Tinyhawk III Plus HDZero Bind-N-Fly BNF ELRS - RMRC

All products containing batteries must be shipped by a ground shipping method.
The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers' feedback and made significant enhancements, including the incorporation of ExpressLRS technology and HDZero advancements in transmission. This is truly the ideal way to try out FPV!  
The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision.
The HDZero variant elevates the FPV video experience to the next level. This cutting-edge digital transmission technology ensures crystal-clear video with low interference, providing a truly immersive and cinematic view while piloting Tinyhawk 3 Plus. 
Check out all our pre-built quads, and all our EMAX gear!

 Specifications

Wheelbase: 76mm

Weight: 35.5g

Motor: TH0802 II - 15000KV

Propellers: Avia Tinyhawk

Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G)

Camera: Runcam HDZero Nano Lite

VTX: HDZero Whoop Lite 0/25mW/200mW

Battery: 1S 650mAh

Includes

1x Tinyhawk 3 Plus HD BNF

1x EMAX 1S HV 650mAh Battery

1x Hardware Kit

1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW)

1x USB Battery Charger


EMAX BNF Tinyhawk III Plus Whoop 1-2S HD Racing Drone w/ HDZero Whoop 

HGLRC

HGLRC BNF Petrel 85 Whoop - ELRS 2.4GHz

HGLRC Petrel 85 Whoop Drone is a four-axis 2S brushless motor indoor FPV beginner drone, suitable for indoor or outdoor light flying.&nbsp

HGLRC Petrel 85 Whoop Drone is a four-axis 2S brushless motor indoor FPV beginner drone, suitable for indoor or outdoor light flying. 

HGLRC Petrel 85 Whoop Drone - ELRS 2.4GHz

Flywoo

Flywoo BNF FlyLens 75 HD Whoop - DJI O3

Introducing the Flywoo FlyLens 75, the smallest DJI O3 Lite drone on the market, meticulously designed by the FLYWOO team.&nbsp

Introducing the Flywoo FlyLens 75, the smallest DJI O3 Lite drone on the market, meticulously designed by the FLYWOO team. 

Flywoo FlyLens 75 2S BNF Whoop HD w/ DJI O3 Lite

Introducing the Flywoo FlyLens 75, the smallest DJI O3 drone on the market, meticulously designed by the FLYWOO team.&nbsp

Introducing the Flywoo FlyLens 75, the smallest DJI O3 drone on the market, meticulously designed by the FLYWOO team. 

Flywoo FlyLens 75 2S BNF Whoop HD w/ DJI O3

Flywoo BNF FlyLens 75 HD Whoop - RunCam Link

Introducing the Flywoo FlyLens 75, the smallest Wasp drone on the market, meticulously designed by the FLYWOO team.&nbsp

Introducing the Flywoo FlyLens 75, the smallest Wasp drone on the market, meticulously designed by the FLYWOO team. 

Flywoo FlyLens 75 2S BNF Whoop HD w/ RunCam Link Wasp Nano

Flywoo BNF FlyLens 75 HD Whoop - Walksnail

Introducing the Flywoo FlyLens 75, the smallest Walksnail drone on the market, meticulously designed by the FLYWOO team.&nbsp

Introducing the Flywoo FlyLens 75, the smallest Walksnail drone on the market, meticulously designed by the FLYWOO team. 

Flywoo FlyLens 75 2S BNF Whoop HD w/ Walksnail Avatar Lite

Flywoo BNF FlyLens 75 HD Whoop - HDZero

Introducing the Flywoo FlyLens 75, the smallest HDZero drone on the market, meticulously designed by the FLYWOO team. 

Flywoo FlyLens 75 2S BNF Whoop HD w/ HDZero Nano V3

Happymodel

Happymodel BNF Mobula 7 Whoop

We’re glad to launched our new Mobula7 drone , this time the 75mm whoop based on 1s power. Thanks to the new AIO flight controller and the new third-generation RS0802 brushless motor, the new Mobula7 1s Will be the best choice in the whoop season. The world first 5-IN-1 AIO flight controller with ExpressLRS 2.0 , OPENV

Happymodel Mobula7 1s 75mm Analog FPV Brushless Whoop Drone - Choose Receiver

HAPPYMODEL

Pre-Orders shipping ASAP! 
Thanks to the new AIO flight controller and the new third-generation RS0802 brushless motor, the new Mobula7 1S Will be the best choice in the whoop season.  This is an amazing flight controller for Brushless whoop. You could get unbelievable RX and VTX ranges by using this flight controller. The new RS0802 motors come with a new unibell design, uses a 1.5mm shaft, and includes a PCB bottom plate, which means high efficiency, and much more reliability.
Check out the rest of pre-built quads and our HappyModel selection!
Features

X12 5-IN-1 AIO flight controller w/ built-in receiver and OpenVTX
VTX Power up to 400mw
RS0802 20000KV motors
RunCam Nano 3. The lightest 1/3 CMOS 800TVL Camera
Smooth and powerful
Compatible with 1S Lipo/LIHV

Specifications

Input Voltage: 1S
Max Continuous Current: 12A
Motors: 0802 20000KV
Camera: RunCam Nano 3
Wheelbase: 75mm
Dimensions: 99x99x40mm
Weight: 24g

Includes

1x HappyModel BNF 1S Mobula 7 Whoop - PNP



Pre-Orders shipping ASAP! Thanks to the new AIO flight controller and the new third-generation RS0802 brushless motor, the new Mobula7 1S Will be the best choice in the whoop season.  This is an amazing flight controller for Brushless whoop. You could get unbelievable RX and VTX ranges by using this flight controller. 

(PRE-ORDER) HappyModel BNF 1S Mobula7 Analog Whoop - PNP

This&nbspHappymodel Mobula7&nbspis a 1S micro whoop with a RunCam Nano 3 Camera. This whoop features the first 5-in-1 AIO with three different receiver options and 0802 20000KV motors with a unibell design.

This Happymodel Mobula7 is a 1S micro whoop with a RunCam Nano 3 Camera. This whoop features the first 5-in-1 AIO with three different receiver options and 0802 20000KV motors with a unibell design.

Happymodel Mobula7 1S 75mm Analog Whoop

Thanks to the new AIO flight controller and the new third-generation RS0802 brushless motor, the new Mobula7 1S Will be the best choice in the whoop season.  This is an amazing flight controller for Brushless whoop. You could get unbelievable RX and VTX ranges by using this flight controller. The new RS0802 motors come with a new unibell design, uses a 1.5mm shaft, and includes a PCB bottom plate, which means high efficiency, and much more reliability.
Check out the rest of pre-built quads and our HappyModel selection!
Features

X12 5-IN-1 AIO flight controller w/ built-in receiver and OpenVTX
VTX Power up to 400mw
RS0802 20000KV motors
RunCam Nano 3. The lightest 1/3 CMOS 800TVL Camera
Smooth and powerful
Compatible with 1S Lipo/LIHV

Specifications

Input Voltage: 1S
Max Continuous Current: 12A
Motors: 0802 20000KV
Camera: RunCam Nano 3
Wheelbase: 75mm
Dimensions: 99x99x40mm
Weight: 24g

Includes

1x HappyModel BNF 1S Mobula 7 Whoop



The all-new HappyModel BNF 1S Mobula 7 Whoop features the latest parts to bring you a fun, exciting whoop to fly. Get it shipped fast and free from RDQ!

HappyModel BNF 1S Mobula7 Analog Whoop - Choose Receiver Type

HappyModel BNF 1S Mobula 7 Whoop for Sale - RaceDayQuads

HappyModel

Thanks to the new AIO flight controller and the new third-generation RS0802 brushless motor, the new Mobula7 1S Will be the best choice in the whoop season.  This is an amazing flight controller for Brushless whoop. You could get unbelievable RX and VTX ranges by using this flight controller. The new RS0802 motors come

HappyModel BNF 1S Mobula7 Analog Whoop - Choose Receiver Type from WREKD Co.

EMAX RTF TinyHawk III Ready to Fly Kit w/ Goggles, Radio Transmitter, Case and 76mm Racing Whoop Drone

      Size class: 76mm Weight (without battery): 32 grams Motors: TH0802 II 15000kv Flight Controller / ESC: F4 STM32 (MATEKF411RX), 1-2S Input, 5A 4-in-1 BLHeli_S ESC Receiver:  SPI / FrSky D8/D16 Camera: RunCam Nano 4 Video Transmitter: 25-100-200mw Switchable 37CH w/ Smart Audio.    

Tinyhawk III FPV Racing Drone - Ready To Fly (RTF) w/ Controller and Goggles

Self-improvement is a core trait for the engineers at EMAX, which is why when approached about a new successor to the Tinyhawk series, they designed the Tinyhawk III to build upon all the strengths of previous generations while improving any shortcomings. First is a drastically redesigned body frame centered around dur

Emax Tinyhawk 3 FPV Racing Drone - Ready To Fly (RTF) w/ Controller and Goggles

Introducing... the&nbspEMAX TinyHawk III RTF Bundle!! This bundle features the EMAX TinyHawk III Quadcopter, EMAX E8 Transmitter, EMAX Transporter 2 Goggles, and RunCam Nano 4 Camera!

Introducing... the EMAX TinyHawk III RTF Bundle!! This bundle features the EMAX TinyHawk III Quadcopter, EMAX E8 Transmitter, EMAX Transporter 2 Goggles, and RunCam Nano 4 Camera!

EMAX TinyHawk III FPV Racing Drone RTF Bundle

EMAX Tinyhawk III FPV Racing Drone RTF with Controller/Goggles

EMAX Tinyhawk III FPV Racing Drone RTF with Controller/Goggl - RMRC

Emax USA

 

 
 
Size class: 76mm
Weight (without battery): 32 grams
Motors: TH0802 II 15000kv
Flight Controller / ESC: F4 STM32 (MATEKF411RX), 1-2S Input, 5A 4-in-1 BLHeli_S ESC
Receiver:  SPI / FrSky D8/D16
Camera: RunCam Nano 4
Video Transmitter: 25-100-200mw Switchable 37CH w/ Smart Audio.
 
 

Tinyhawk III FPV Racing Drone - Ready To Fly (RTF) w/ Controller and Goggles from WREKD Co.

EMAX BNF Tinyhawk II Racing Quadcopter

Tinyhawk II Race FPV Racing Drone F4 5A 7500KV RunCam Nano2 700TVL 37CH 25/100/200mW VTX 2S - BNF

Tinyhawk II Race BNF

EMAX has gone back to make what was already an amazing micro quadcopter even better, with a RunCam Nano 2 FPV Camera with adjustable tilt, higher power VTX, LEDs, and more powerful motors.

EMAX TinyHawk 2 Micro Brushless FPV Drone w/ RunCam Nano 2 (BNF)









 
 Frame
Wheelbase: 90mm
Dry Weight: 47.5g
All Up Weight: 73g with 2x 450mAh 1S battery
Frame Material: Polypropylene &ampamp Carbon Fiber
 

 Motors
Stator Size: 1103
Kv: 7500kv
Propeller Mount: T-mount
Propeller: Avan Blur 2&quot/span&ampgt
 

 All-In-One (AIO) Flight Controller
Flight Controller: F4 (MATEKF411RX Firmware)
ESC: 4-in-1 5A BlHeli_S
Receiver: EMAX SPI Receiver (Compatible with FrSky D8 mode**)
Battery Connector: JST-PH2.0 Duo
 

 FPV System
Ham radio license required for use in North America.
VTX Power: 25/100/200mw Switchable (set to stay at 25mW until armed)*
Channels: 37CH incl. Raceband
Camera: RunCam Nano 2 1/3&quot 700TVL CMOS
Smart Audio Connected
 

 Includes
1x Tinyhawk II Race BNF
2x EMAX 450mAh 1S HV Battery
1x 1S USB LiPo Charger
1x Screwdriver + Hardware Kit
 
*Please note that even if you unlocked the video transmitter (VTX) per the manual and are changing power levels via the OSD/Smart Audio (VTX SA), the Race is set to stay at 25mW until you arm the motors.
** Be advised that this model is NOT compatible with the latest 2019+ FrSky ACCESS protocol transmitters without the use of FrSky&#39s external XJT module for ACCESS transmitters for D8 mode capability.
 
RECOMMENDED FOR CHILDREN 14+ YEARS OF AGE

   Frame Wheelbase: 90mm Dry Weight: 47.5g All Up Weight: 73g with 2x 450mAh 1S battery Frame Material: Polypropylene &amp; Carbon Fiber    Motors Stator Size: 1103 Kv: 7500kv Propeller Mount: T-mount Propeller: Avan Blur 2"/span&gt;    All-In-One (AIO) Flight Controller Flight Controller: F4 (MATEKF411RX Firmware) ESC

Tinyhawk II Race BNF from WREKD Co.

Emax took the already amazing Tinyhawk and made it the perfect micro indoor and outdoor racing drone by adding industry standard Runcam Nano 2 camera on an adjustable mount and higher output VTX up to 200mW with more filtering.Find parts and accessories in our TinyHawk 2 Collection! Frame: Wheelbase: 75mm Dry Weight: 3

EMAX Tinyhawk 2 racing Drone BNF With Runcam Nano2

Besides being a beginner-friendly, fun and micro-sized drone, EMAX's Tinyhawk II Race is a more performance-oriented outdoor 2S quadcopter. 

EMAX Tinyhawk II Race Micro Brushless FPV Drone w/ RunCam Nano 2 

EMAX RTF EZ Pilot Pro Kit - Goggles, Radio Transmitter, 75mm Whoop

        Drone Specs: Wheelbase: 75mm Dry weight: 32.5g AIO: MATEKF411 FC w/ 6A ESC and  25/100/200mw switchable video transmitter Motor: 08025 II KV15000 RX Protocol: FrSky D8 SPI Includes: 1x EZ Pilot Pro Drone 1x E8 Transmitter 1x Transporter 2 Non-DVR Version 1x Monitor Mounting Hardware 1x EMAX 1S 450 mAh LiPo batt

EZ Pilot Pro Ready-To-Fly RTF FPV Drone w/ Controller & Goggles

Consistent improvement is the goal of our team at EMAX but this comes at a cost. With more upgrades to our micro indoor racing drones which cater to more experienced pilots, we further alienate potential budding pilots looking to explore the world of FPV. This is why our engineers have come up with a solution through t

EMAX EZ Pilot Pro Indoor Racing Drone - RTF

 

 
 
 
Drone Specs:

Wheelbase: 75mm
Dry weight: 32.5g
AIO: MATEKF411 FC w/ 6A ESC and  25/100/200mw switchable video transmitter
Motor: 08025 II KV15000
RX Protocol: FrSky D8 SPI

Includes:

1x EZ Pilot Pro Drone
1x E8 Transmitter
1x Transporter 2 Non-DVR Version
1x Monitor Mounting Hardware
1x EMAX 1S 450 mAh LiPo battery
1x 6-Port 1S USB LiPo Battery Charger
1x USB Cable for Charging + Programming
1x Set Spare Turtlemode Propellers
1x Set Spare Hardware

EZ Pilot Pro Ready-To-Fly RTF FPV Drone w/ Controller & Goggles from WREKD Co.

The EZ Pilot Pro drone features an improved frame, 200mw VTX capabilities, and a solid pin PH2.0 connector over the original.

EMAX EZ Pilot Pro Beginner FPV Drone RTF Kit w/ Transporter 2 Goggles + E8 Transmitter

EMAX RTF EZ Pilot Beginner Indoor Racing Quadcopter

EZ Pilot Beginner Indoor Racing Drone - RTF (PRE-ORDER)

EZ Pilot Beginner Indoor Racing Drone - With Controller & Goggle RTF

EMAX EZ Pilot Beginner Indoor Racing Drone - RTF Check out all our Emax Products and the rest of our BNF/PNP/RTFs!         Features: - Real-time Hobby-grade First-Person-View (FPV) Video Transmission System - Gyroscopic Self-leveling with 3-modes from beginner to advanced - Smart Height Assist altitude control in begin

EMAX EZ Pilot Beginner Indoor Racing Drone - RTF

Just in time for the holidays, the EMAX EZ Pilot is the best way to start flying drones! The EZ Pilot has a built-in FPV camera that allows the user to fly first-person through the FPV goggles so you can feel like you are flying in the air! 

EMAX EZ Pilot - Beginner FPV Drone RTF Kit w/ FPV Goggles + Radio

 


 
     
 
 
Features:
- Real-time Hobby-grade First-Person-View (FPV) Video Transmission System
- Gyroscopic Self-leveling with 3-modes from beginner to advanced
- Smart Height Assist altitude control in beginner modes with full manual throttle control in advanced mode.
- EZ One Stick Control that mixes yaw and roll into one stick for simple, intuitive flight feel
- On-board FPV camera to experience flight from inside the aircraft
- 4 Minute flight time with included 450mah 1S battery
- Ergonomic Radio Controller and Comfort Fit FPV Virtual Reality Goggle included
 
 
 
 
 
Includes:
- 1x EZ-Pilot Indoor Drone
- 1x EZ-Pilot Controller (Proprietary Protocol, see Compatibility)
- 1x Transporter 5.8G FPV Goggles with 1x linear antenna included + second SMA port for upgrade/expansion
- 1x Transporter USB-rechargable 18650 Battery Pack
- 1x 450mah 1S 4.35V HV LiPo Battery
- 1x USB-powered 1S Charger
- 2x CW 2x CCW EZ Pilot Replacement Props
- 1x Micro USB Cable
- 1x EZ-Pilot Decal Customization Kit
 
 
 RECOMMENDED FOR CHILDREN 14+ YEARS OF AGE
UPC: 691036971855

        Features: - Real-time Hobby-grade First-Person-View (FPV) Video Transmission System - Gyroscopic Self-leveling with 3-modes from beginner to advanced - Smart Height Assist altitude control in beginner modes with full manual throttle control in advanced mode. - EZ One Stick Control that mixes yaw and roll into o

EZ Pilot Beginner Indoor Racing Drone - With Controller & Goggle RTF from WREKD Co.

Sub250

Sub250 BNF Whoopfly16 1.6" HD Ultralight Whoop - HDzero, 2.4GHz ELRS

The Sub250 Whoopfly16 BNF is an ultra-light 1S mini Whoop designed for a smooth indoor flying experience. It features an inverted pusher FPV drone layout, a one-piece injection-molded protective ring frame, and a short wheelbase to provide maximum safety and protection. Powered by a popular 1002 motor, this reliable drone delivers a strong and effortless user experience. Whoopfly16 can adapt to mainstream 1S image transmission (analog / HD Zero / AVATAR). The analog video transmission will be equipped with an Ant eco lens from Caddx, and the elevation angle of the lens can be adjusted upwards by 30 degrees. With the latest 1s 530mah battery, the battery life can reach 4 minutes and 30 seconds.
Make sure to check out all of our HDzero BNF quads as well as the rest of our Sub250 selection!

Features

Inverted whoop FPV drone makes the paddle and motor more efficient.

With the new 1S 530mah LiHV battery

Highly integrated flight control, integrated flight control, ESC, remote control receiver, and video transmission.
One-piece injection molded protective ring frame, higher strength, and less deformation of the frame during aggressive flight.
The protection of the circle is enhanced, and novices and experienced pilots both are safe.
There are many options for image transmission, you can choose HD Zero /AVATAR and analog image transmission
Use 1002 21000kv motor, abundant power &quotalways ready to overtake&quot

Indoor flight is safer with a small wheelbase and a protective ring, and it is handier to fly with a reasonable combination.
Suitable for beginner outdoor advanced racing practice








Specification 

HD Zero Version

Product name: Whoopfly16

Frame: WF16

Wheelbase size: 75mm

Flight control system: Redfox A1

MCU: STMF411

IMU: ICM42688-P
OSD: BetaFlight OSD w/AT7456E chip

ESC: Redfox A1 4IN1 5A ESC

VTX: Hd Zero whoop lite

Lens: Hd Zero nano lite camera

Propeller: Gemfan 1608-3

Antenna: 5.8g copper tube antenna 70mm

weight: 39.2g
Receiver: ELRS (SPI) 

Includes

1x Sub250 Whoopfly16 BNF 1.6&quot HD Ultra-Light HDzero 1S Whoop - ELRS 2.4GHz (SPI)
4x M1.4 cross screws

1x Blue frame protection cotton

1x Red frame protective cotton

1x L-shaped inner hexagon screw blade

1x Cross screw blade

2x 3M double-sided tape

4x 1608-3 propellers


The Sub250 Whoopfly16 BNF is an ultra-light 1S mini Whoop designed for a smooth indoor flying experience. It features an inverted pusher FPV drone layout, a one-piece injection-molded protective ring frame, and a short wheelbase to provide maximum safety and protection. Powered by a popular 1002 motor, this reliable dr

Sub250 Whoopfly16 BNF 1.6" HD Ultra-Light HDzero 1S Whoop - ELRS 2.4GHz (SPI) from WREKD Co.

Sub250 Whoopfly16 BNF 1.6

Sub250 Whoopfly16 BNF 1.6" HD Ultra-Light HDzero 1S Whoop - ELRS 2.4GHz (SPI)

SUB250

Pre-Orders shipping ASAP!
The Sub250 Whoopfly16 BNF is an ultra-light 1S mini Whoop designed for a smooth indoor flying experience. It features an inverted pusher FPV drone layout, a one-piece injection-molded protective ring frame, and a short wheelbase to provide maximum safety and protection. Powered by a popular 1002 motor, this reliable drone delivers a strong and effortless user experience. Whoopfly16 can adapt to mainstream 1S image transmission (analog / HD Zero / AVATAR). The analog video transmission will be equipped with an Ant eco lens from Caddx, and the elevation angle of the lens can be adjusted upwards by 30 degrees. With the latest 1s 530mah battery, the battery life can reach 4 minutes and 30 seconds.
Make sure to check out all of our HDzero BNF quads as well as the rest of our Sub250 selection!

Features

Inverted whoop FPV drone makes the paddle and motor more efficient.

With the new 1S 530mah LiHV battery

Highly integrated flight control, integrated flight control, ESC, remote control receiver, and video transmission.
One-piece injection molded protective ring frame, higher strength, and less deformation of the frame during aggressive flight.
The protection of the circle is enhanced, and novices and experienced pilots both are safe.
There are many options for image transmission, you can choose HD Zero /AVATAR and analog image transmission
Use 1002 21000kv motor, abundant power "always ready to overtake"

Indoor flight is safer with a small wheelbase and a protective ring, and it is handier to fly with a reasonable combination.
Suitable for beginner outdoor advanced racing practice








Specification 

HD Zero Version

Product name: Whoopfly16

Frame: WF16

Wheelbase size: 75mm

Flight control system: Redfox A1

MCU: STMF411

IMU: ICM42688-P
OSD: BetaFlight OSD w/AT7456E chip

ESC: Redfox A1 4IN1 5A ESC

VTX: Hd Zero whoop lite

Lens: Hd Zero nano lite camera

Propeller: Gemfan 1608-3

Antenna: 5.8g copper tube antenna 70mm

weight: 39.2g
Receiver: ELRS (SPI) 

Includes

1x Sub250 Whoopfly16 BNF 1.6" HD Ultra-Light HDzero 1S Whoop - ELRS 2.4GHz (SPI)
4x M1.4 cross screws

1x Blue frame protection cotton

1x Red frame protective cotton

1x L-shaped inner hexagon screw blade

1x Cross screw blade

2x 3M double-sided tape

4x 1608-3 propellers


Pre-Orders shipping ASAP! The Sub250 Whoopfly16 BNF is an ultra-light 1S mini Whoop designed for a smooth indoor flying experience. It features an inverted pusher FPV drone layout, a one-piece injection-molded protective ring frame, and a short wheelbase to provide maximum safety and protection. Powered by a popular 10

(PRE-ORDER) Sub250 Whoopfly16 BNF 1.6" HD Ultra-Light HDzero 1S Whoop - ELRS 2.4GHz (SPI)

(PRE-ORDER) Sub250 Whoopfly16 BNF 1.6" HD Ultra-Light HDzero 1S Whoop 

HGLRC BNF Drashark 1S 1.6" Analog Toothpick Micro Quad - 2.4GHz ELRS












Pre-Orders shipping ASAP!
The HGLRC Drashark Analog 1S 1.6" Toothpick Micro Quad - ELRS 2.4GHz is perfect for both beginners and experienced drone pilots. This budget-friendly mini-drone is designed to deliver top-notch performance both inside and out. It features a Caddx camera, SPECTER 1002 motor, and Gemfan 1610 bi-blade propellers for a more energy-efficient and low-noise flight. The HGLRC Zeus5 ES25 board lies at the core of this drone, boasting an F411 flight controller, 10A Bluejay compatible ESCs, 16MB onboard blackbox memory, and an ELRS 2.4GHz receiver with ceramic antenna. A 200mW analog video transmitter comes alongside, along with a Caddx FPV camera embedded in a 3D printed top.  Perfect for those looking for a compact yet powerful drone experience!











Check out our other pre-built quads, and all our HGLRC products!


0



















Specifications

Recommended Battery: 1S 500-600mAh

Motors: 1002 21000Kv

Propellers: Gemfan 1610 - 40mm Bi-Blade

Receiver: ELRS 2.4GHz

Weight: 30g
Size: 70x60mm

Gyro: BMI270

FC: HGLRC SPECTER 10A F411AIO

ESC: 10A Bluejay

Processor: F411

VTX output: 25/100/200mW

 Includes

1x HGLRC BNF Drashark 1S 1.6" Analog Toothpick Micro Quad - ELRS 2.4GHz


Pre-Orders shipping ASAP! The HGLRC Drashark Analog 1S 1.6" Toothpick Micro Quad - ELRS 2.4GHz is perfect for both beginners and experienced drone pilots. This budget-friendly mini-drone is designed to deliver top-notch performance both inside and out. It features a Caddx camera, SPECTER 1002 motor, and Gemfan 1610 bi-

(PRE-ORDER) HGLRC BNF Drashark 1S 1.6" Analog Toothpick Micro Quad - ELRS 2.4GHz

(PRE-ORDER) HGLRC BNF Drashark 1S 1.6" Analog Toothpick Micro Quad - E












The HGLRC Drashark Analog 1S 1.6&quot Toothpick Micro Quad - ELRS 2.4GHz is perfect for both beginners and experienced drone pilots. This budget-friendly mini-drone is designed to deliver top-notch performance both inside and out. It features a Caddx camera, SPECTER 1002 motor, and Gemfan 1610 bi-blade propellers for a more energy-efficient and low-noise flight. The HGLRC Zeus5 ES25 board lies at the core of this drone, boasting an F411 flight controller, 10A Bluejay compatible ESCs, 16MB onboard blackbox memory, and an ELRS 2.4GHz receiver with ceramic antenna. A 200mW analog video transmitter comes alongside, along with a Caddx FPV camera embedded in a 3D printed top.  Perfect for those looking for a compact yet powerful drone experience!











Check out our other pre-built quads, and all our HGLRC products!


0



















Specifications

Recommended Battery: 1S 500-600mAh

Motors: 1002 21000Kv

Propellers: Gemfan 1610 - 40mm Bi-Blade

Receiver: ELRS 2.4GHz

Weight: 30g
Size: 70x60mm

Gyro: BMI270

FC: HGLRC SPECTER 10A F411AIO

ESC: 10A Bluejay

Processor: F411

VTX output: 25/100/200mW

 Includes

1x HGLRC BNF Drashark 1S 1.6&quot Analog Toothpick Micro Quad - ELRS 2.4GHz


The HGLRC Drashark Analog 1S 1.6" Toothpick Micro Quad - ELRS 2.4GHz is perfect for both beginners and experienced drone pilots. This budget-friendly mini-drone is designed to deliver top-notch performance both inside and out. It features a Caddx camera, SPECTER 1002 motor, and Gemfan 1610 bi-blade propellers for a mor

HGLRC BNF Drashark 1S 1.6" Analog Toothpick Micro Quad - ELRS 2.4GHz from WREKD Co.

HGLRC BNF Drashark 1S 1.6

HGLRC BNF Drashark 1S 1.6" Analog Toothpick Micro Quad - ELRS 2.4GHz

Flywoo BNF Firefly 2S Nano Baby 20 HD 2" Quad - RunCam Link

Pre-Orders shipping ASAP! TBS version in stock and shipping same day! 
Firefly Nano Baby 20 is equipped with the most efficient micromotor and the top AIO flight control on the market. It will bring you an unprecedented flying experience.  The drone could do all the acrobatic motions smoothly, like diving and power looping.
Check out our other pre-built quads, as well as other great products from Flywoo!

Specifications

Weight: 44.44g (without battery)

FC &ampamp ESC : GOKU Versatile F405 2S 12A AIO

Frame: Firefly 2S Nnano Baby 20 VISTA Frame kit

Motors: Flywoo ROBO 1002 15500KV

Props: Gemfan 2015-2 blade 

Link &ampamp Camera : Naked RunCam Link Wasp Nano


GOKU Versatile F4 5-IN-1 1S AIO FC / VTX

SIZE: 30x30mm
Weight: 4.1g
Hole: 25.5x25.5-3mm
MCU: STM32F405
UARTS: 6
MOTOR: M1-M4 OUTPUT I2C: SCL/SDA
GYRO: ICM42688

Barometer: ICM42688

LED: 2x WS2812
Flash: 8M
BEC: 5V 2A
Firmware: FLYWOOF405S_AIO

Onboard 4in1 ESC

Built-in 1S/2S 12A BL_S 4in1 ESC
Support Oneshot125, Oneshot42, Multishot,
Dshot150, Dshot300, Dshot600
Input Voltage: 1-2S Lipo
Firmware: BLHELI_S
Firmware: Z_H_30_REV16.7

Flywoo ROBO 1002 15500Kv Motor


KV: 15500Kv


Input Voltage: 2S LiPo


Stator Dimensions: Φ10mm x 2mm


Shaft Diameter: Φ 1.5mm


Wire Dimensions: 30AWG x 40mm

Weight (with wires): 2.4g

Nano Wasp HD Camera

Dimensions: L18mmxW14mmxH18mm

LENS: FOV D:160° H:127° V:92°

Resolution: 720P@120fps(4:3)

Net Weight: 6g(With Cable)

Shutter: Rolling Shutter

Coaxial Cable: 80 mm

Image Sensor: 1/3&quot


Naked Link Air Unit

Input Voltage: 7.4-26.4V@ 4-9W
Operating Frequency: 5.725-5.850 GHz

Transmitter Power: (EIRP) FCC/SRRC: &amplt30 dBm CE: &amplt14 dBm
Min. Latency (end-to-end): 1280 x 720 60fps: 32 ms
Max. Transmission Distance: FCC/SRRC: 4 km CE: 0.7 km
I/O Interface: Type-C, IPEX, 3-in-1 port,
Supported Flight Control System: BetaFlight
Operating Temperature Range: 0° to 40° C (32° to 104° F)





Includes

1x Flywoo BNF Firefly 2S Nano Baby 20 HD 2&quot Quad w/ Naked RunCam Link &ampamp RunCam Wasp - Choose Receiver

2x set of 2015-2 props

1x Screw spare packs
2x Battery holder
4x Prop guards


Pre-Orders shipping ASAP! TBS version in stock and shipping same day! Firefly Nano Baby 20 is equipped with the most efficient micromotor and the top AIO flight control on the market. It will bring you an unprecedented flying experience.  The drone could do all the acrobatic motions smoothly, like diving and power loop

Flywoo BNF Firefly 2S Nano Baby 20 HD 2" Quad w/ Naked RunCam Link & RunCam Wasp - Choose Receiver from WREKD Co.

Flywoo BNF Firefly 2S Nano Baby 20 HD 2

Flywoo BNF Firefly 2S Nano Baby 20 HD 2" Quad w/ Naked RunCam Link & RunCam Wasp - Choose Receiver

FLYWOO

Pre-Orders shipping ASAP! TBS version in stock and shipping same day! 
Firefly Nano Baby 20 is equipped with the most efficient micromotor and the top AIO flight control on the market. It will bring you an unprecedented flying experience.  The drone could do all the acrobatic motions smoothly, like diving and power looping.
Check out our other pre-built quads, as well as other great products from Flywoo!

Specifications

Weight: 44.44g (without battery)

FC &amp ESC : GOKU Versatile F405 2S 12A AIO

Frame: Firefly 2S Nnano Baby 20 VISTA Frame kit

Motors: Flywoo ROBO 1002 15500KV

Props: Gemfan 2015-2 blade 

Link &amp Camera : Naked RunCam Link Wasp Nano


GOKU Versatile F4 5-IN-1 1S AIO FC / VTX

SIZE: 30x30mm
Weight: 4.1g
Hole: 25.5x25.5-3mm
MCU: STM32F405
UARTS: 6
MOTOR: M1-M4 OUTPUT I2C: SCL/SDA
GYRO: ICM42688

Barometer: ICM42688

LED: 2x WS2812
Flash: 8M
BEC: 5V 2A
Firmware: FLYWOOF405S_AIO

Onboard 4in1 ESC

Built-in 1S/2S 12A BL_S 4in1 ESC
Support Oneshot125, Oneshot42, Multishot,
Dshot150, Dshot300, Dshot600
Input Voltage: 1-2S Lipo
Firmware: BLHELI_S
Firmware: Z_H_30_REV16.7

Flywoo ROBO 1002 15500Kv Motor


KV: 15500Kv


Input Voltage: 2S LiPo


Stator Dimensions: Φ10mm x 2mm


Shaft Diameter: Φ 1.5mm


Wire Dimensions: 30AWG x 40mm

Weight (with wires): 2.4g

Nano Wasp HD Camera

Dimensions: L18mmxW14mmxH18mm

LENS: FOV D:160° H:127° V:92°

Resolution: 720P@120fps(4:3)

Net Weight: 6g(With Cable)

Shutter: Rolling Shutter

Coaxial Cable: 80 mm

Image Sensor: 1/3"


Naked Link Air Unit

Input Voltage: 7.4-26.4V@ 4-9W
Operating Frequency: 5.725-5.850 GHz

Transmitter Power: (EIRP) FCC/SRRC: &lt30 dBm CE: &lt14 dBm
Min. Latency (end-to-end): 1280 x 720 60fps: 32 ms
Max. Transmission Distance: FCC/SRRC: 4 km CE: 0.7 km
I/O Interface: Type-C, IPEX, 3-in-1 port,
Supported Flight Control System: BetaFlight
Operating Temperature Range: 0° to 40° C (32° to 104° F)





Includes

1x Flywoo BNF Firefly 2S Nano Baby 20 HD 2" Quad w/ Naked RunCam Link &amp RunCam Wasp - Choose Receiver

2x set of 2015-2 props

1x Screw spare packs
2x Battery holder
4x Prop guards


Flywoo BNF Firefly 2S Nano Baby 20 HD 2" Quad w/ Naked RunCam Link & R

Flywoo BNF Firefly Hex Nano HD V1.2 1.6" 4S Micro Quad - RunCam Link











Flywoo's Firefly Hex Nano V1.2 is the smallest hexacopter ever designed by Flywoo, weighing in at 74g. It powerfully and stably carries Insta 360go and SMO 4K cameras. The Firefly hex nano is small, flexible, stable, and is full of power and offers unmatched control.










Check out our other pre-built quads, as well as other great products from Flywoo!
Feature

Hexacopter
HD system
Naked Vista
Weighing only 74 grams
Built in SMO Power Cable
Prebuilt and tested





Specifications


Weight: 74g


Wheelbase: 80mm


FC &amp ESC:【No.C203】GOKU HEX F4 16x16 STACK - ( FC+13A ESC ) ( MPU6000) 


Frame: Firefly Baby Quad Frame (HD Verison)


Motors: Nin V2 1203Pro 5500Kv


Props: Gemfan 1636 40mm-4 V2.0


HD digital camera &amp VTX: Naked RunCam Link &amp RunCam Wasp


Antenna: Atomic 5.8GHz Antenna Length 30mm (LHCP)


Battery (Recommended): 4S 450mAh / 4S 300mAh battery (Not including)



GOKU HEX GN405 Nano16X16 FC 

MCU: STM32F405 BGA
IMU: ICM42688P
Barometer: DPS310
input voltage： 2-6S
Onboard LED：WS2812x4
6 hardware UARTS (UART1,2,3,4,5,6)
Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only.
PPM and PWM receivers are not supported.
Onboard 16Mbytes for Blackbox logging
5V Power Out: 2.0A max
3.3V Power Out: 0.5A max
Dimensions: 22x22mm
Mounting Holes: 16x16mm
Weight: 2.3g
Firmware : FLYWOOF405NANO

BS13A BLheli_S 2-4S 4in1


lBS20/35A BLheli_S 2-6S 4in1


Weight: 2.5g

Mounting Hole: 16x16mm (M3)
Support Oneshot, Multishot,
DShot150/300/600




Nin V2 Motor

Stator Size: 1203
Motor Bolt Pattern: 9x9mm
KV: 5500

Wasp Nano HD Camera

Dimensions: L18mmxW14mmxH18mm

LENS: FOV D:160° H:127° V:92°

Resolution: 720P@120fps(4:3)

Net Weight: 6g(With Cable)

Shutter: Rolling Shutter

Coaxial Cable: 80 mm

Image Sensor: 1/3"

Naked Link Air Unit

Input Voltage: 7.4-26.4V@ 4-9W
Operating Frequency: 5.725-5.850 GHz

Transmitter Power: (EIRP) FCC/SRRC: &lt30 dBm CE: &lt14 dBm
Min. Latency (end-to-end): 1280 x 720 60fps: 32 ms
Max. Transmission Distance: FCC/SRRC: 4 km CE: 0.7 km
I/O Interface: Type-C, IPEX, 3-in-1 port,
Supported Flight Control System: BetaFlight
Operating Temperature Range: 0° to 40° C (32° to 104° F)


Includes

1x Flywoo BNF Firefly Hex Nano V1.2 1.6" HD 4S Micro Quad w/ Naked RunCam Link &amp RunCam Wasp - Choose Receiver
1x Accessories (props, prop guard, RunCam link shell, battery straps, hardware, ect)



Flywoo's Firefly Hex Nano V1.2 is the smallest hexacopter ever designed by Flywoo, weighing in at 74g. It powerfully and stably carries Insta 360go and SMO 4K cameras. The Firefly hex nano is small, flexible, stable, and is full of power and offers unmatched control. Check out our other pre-built quads, as well as othe

Flywoo BNF Firefly Hex Nano HD V1.2 1.6" 4S Micro Quad w/ Naked RunCam Link & RunCam Wasp -  Choose Receiver

Flywoo BNF Firefly Hex Nano HD V1.2 1.6" 4S Micro Quad w/ Naked RunCam











Flywoo&#39s Firefly Hex Nano V1.2 is the smallest hexacopter ever designed by Flywoo, weighing in at 74g. It powerfully and stably carries Insta 360go and SMO 4K cameras. The Firefly hex nano is small, flexible, stable, and is full of power and offers unmatched control.










Check out our other pre-built quads, as well as other great products from Flywoo!
Feature

Hexacopter
HD system
Naked Vista
Weighing only 74 grams
Built in SMO Power Cable
Prebuilt and tested





Specifications


Weight: 74g


Wheelbase: 80mm


FC &ampamp ESC:【No.C203】GOKU HEX F4 16x16 STACK - ( FC+13A ESC ) ( MPU6000) 


Frame: Firefly Baby Quad Frame (HD Verison)


Motors: Nin V2 1203Pro 5500Kv


Props: Gemfan 1636 40mm-4 V2.0


HD digital camera &ampamp VTX: Naked RunCam Link &ampamp RunCam Wasp


Antenna: Atomic 5.8GHz Antenna Length 30mm (LHCP)


Battery (Recommended): 4S 450mAh / 4S 300mAh battery (Not including)



GOKU HEX GN405 Nano16X16 FC 

MCU: STM32F405 BGA
IMU: ICM42688P
Barometer: DPS310
input voltage： 2-6S
Onboard LED：WS2812x4
6 hardware UARTS (UART1,2,3,4,5,6)
Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only.
PPM and PWM receivers are not supported.
Onboard 16Mbytes for Blackbox logging
5V Power Out: 2.0A max
3.3V Power Out: 0.5A max
Dimensions: 22x22mm
Mounting Holes: 16x16mm
Weight: 2.3g
Firmware : FLYWOOF405NANO

BS13A BLheli_S 2-4S 4in1


lBS20/35A BLheli_S 2-6S 4in1


Weight: 2.5g

Mounting Hole: 16x16mm (M3)
Support Oneshot, Multishot,
DShot150/300/600




Nin V2 Motor

Stator Size: 1203
Motor Bolt Pattern: 9x9mm
KV: 5500

Wasp Nano HD Camera

Dimensions: L18mmxW14mmxH18mm

LENS: FOV D:160° H:127° V:92°

Resolution: 720P@120fps(4:3)

Net Weight: 6g(With Cable)

Shutter: Rolling Shutter

Coaxial Cable: 80 mm

Image Sensor: 1/3&quot

Naked Link Air Unit

Input Voltage: 7.4-26.4V@ 4-9W
Operating Frequency: 5.725-5.850 GHz

Transmitter Power: (EIRP) FCC/SRRC: &amplt30 dBm CE: &amplt14 dBm
Min. Latency (end-to-end): 1280 x 720 60fps: 32 ms
Max. Transmission Distance: FCC/SRRC: 4 km CE: 0.7 km
I/O Interface: Type-C, IPEX, 3-in-1 port,
Supported Flight Control System: BetaFlight
Operating Temperature Range: 0° to 40° C (32° to 104° F)


Includes

1x Flywoo BNF Firefly Hex Nano V1.2 1.6&quot HD 4S Micro Quad w/ Naked RunCam Link &ampamp RunCam Wasp - Choose Receiver
1x Accessories (props, prop guard, RunCam link shell, battery straps, hardware, ect)



Flywoo BNF Firefly Hex Nano HD V1.2 1.6" 4S Micro Quad w/ Naked RunCam Link & RunCam Wasp -  Choose Receiver from WREKD Co.

Flywoo BNF Firefly Hex Nano HD V1.2 1.6

BetaFPV

BetaFPV BNF Meteor75 Pro 1S HD 75mm Whoop - Walksnail Avatar

BETAFPV

All products with batteries must be shipped by a ground shipping method.
Check out the this BNF Meteor75 Pro HD 1S Brushless Whoop from BETAFPV. This quad is impressive with its clean aesthetic and its down right power performance.  BETAFPV wants you to know this is the largest 1S digital whoop you can get today. This BNF will feature a F4 1S 5A FC, with 1102 22000Kv motors and ideally you would want a 550mAh 1S Battery to use with this quad. With this frame, you will get to see a more roomier battery slot for ease of use, as well as to able to accommodate  a bigger battery. 
Note: The Frsky version reserves two UART ports for the available external receiver so it can be used as PNP. 
Make sure to check out our other Pre-Built quads and the rest of our BetaFPV selection!
Features

The upgraded frame that fits 45mm props perfectly makes Meteor75 Pro the largest 1S whoop drone. Powered with 1102 22000KV motors, it performs smoothly in the air and is maneuverable for freestyle tricks.
It features a roomier battery slot that can accommodate a bigger battery such as BT2.0 550mAh 1S battery, which provides a larger capacity and higher discharge rate, bringing more flight time and robust flight performance to the quadcopter.

Micro Canopy Lite has an adjustable camera lens of 0-40°. This new canopy weighs only 1.1g, which is very suitable for HD digital VTX drone, and the open design makes the electronics cooler better.

Equipped with F4 1S 5A flight controller (Serial ELRS 2.4G or SPI Frsky). The ELRS 2.4G RX version comes with the default ELRS V2.0 firmware and supports being upgraded to ELRS V3.0 separately without flashing Betaflight flight controller firmware. The SPI Frsky version can be also used as the PNP version to connect external receiver due to the two UART ports on the board.

The various colors of the spare parts including the Meteor75 Pro frame and Micro
Reserve two UART ports on F4 1S 5A FC(SPI Frsky) V3.0 board. The Frsky version also can be used as the PNP version. Therefore, pilots can connect the external receiver to it.

Ultralight weight for Meteor75 Pro HD 35.77g (Walksnail)/ 34.87g (HDZero), this largest 1S drone combined with Walksnail or HDZero HD digital VTX system gives pilots an immersive flight experience and impactful visuals.

HD Digital VTX System
The Walksnail Avatar HD Mini 1S Lite uses H.265 high-efficiency video coding, an industry-leading technology, providing 1080P/60FPS image recording with 22ms ultra-low latency. It is specially designed for 3.1-5V power input and 7.8g lightweight, compatible with 1S whoop drone. Built-in 8 GB storage, this VTX has the capability of recording HD video without interference from capacity and exporting video by USB cable. Besides, with Canvas Mode, Betaflight full OSD display is supported and can be adjusted easily by remote control.
Note: Please make sure that the battery voltage must be 3.1V at least when flying, otherwise, the HD digital VTX would stop working.
Flight Controller
The latest F4 1S 5A flight controllers are applied to all BNF versions of Meteor75 HD. It features Serial ELRS 2.4G instead of SPI ELRS 2.4G for ELRS version compared to the previous version. The Frsky version reserves two UART ports for the available external receiver so it can be used as PNP. The ESC on the new board is powered by BB51 hardware in place of BB21. Last but not least, we update the gyro to BOSH BMI270 for better performance and stability since the new F4 1S 5A FC.




Meteor75 Pro HD (ELRS)


Meteor75 Pro HD (Frsky, PNP, TBS)



FC Inside
F4 1S 5A FC (Serial ELRS 2.4G) V2.0
F4 1S 5A FC (SPI Frsky) V3.0




Gyro
BMI270
BMI270




FC Firmware
BETAFPVF411
BETAFPVF411RX




UART Port
One UART Port
Two UART Ports




External RX
Not Supported
Supported




Note: Pay attention, ONLY the newest Betaflight firmware 4.3.1 start to support this BMI270 gyrometer. Please check the below link to download the firmware and CLI dump file. If you update the 4.3.1 firmware from Betaflight official site, please flash the CLI dump file for Meteor75 HD.
Micro Canopy Lite
Micro Canopy Lite is specially designed to be compatible with HD digital VTX and has an adjustable camera lens of 0-40°. By using the new Micro Canopy Lite, the weight of the drone is reduced, which in turn can improve flight performance and increase flight time. The open design helps to dissipate heat more effectively, reducing the risk of damage to the VTX or other electronic components inside the drone.
Endurance Boosting Battery
With the new BT2.0 550mAh 1S battery, Meteor75 Pro HD ensures more flight time up to 5:30 (Walksnail)/5:40 (HDZero) so that pilots can less worry about the battery. What's more, it has a discharge of 40C (continuous) and 80C (burst), bringing a robust flight experience to pilots.
Meteor HD Series

BETAFPV has been optimizing and upgrading the Meteor series for better performance. The Meteor HD Series whoop drones including Meteor75 1S HD, and Meteor85 2S HD with Walksnail or HDZero HD digital VTX system aim to provide pilots with an immersive flight experience for FPV racing and high-definition images.
Meteor75 Pro Frame

Meteor75 Pro frame is the largest 1S whoop frame with 45mm propellers currently and comes with more features. The frame features a roomier battery slot for more battery choices such as BT2.0 550mAh battery. The motor holder is using a triangle bilateral stretch structure, giving pilots a more durable and smoother flight experience. In addition, the Meteor75 Pro frame offers seven colors for options, which pilots should purchase separately.
Powerful 1S Drone Combo

Even carrying the HD digital VTX system, Meteor75 Pro HD still performs well in power and speed thanks to its upgraded frame that is suitable for 45mm props, allowing it to be the largest 1S power whoop drone with greater thrust and lift. Fit out with 1102 22000KV motors and BT2.0 550mAh 1S battery, this 1S drone combo has an excellent thrust-to-weight ratio performance and provides an immersive flight experience to pilots.
Specification

Item: Meteor75 Pro Brushless Whoop Quadcopter (1S HD Digital VTX)
Flight Time: 5:30 (Walksnail)/ 5:40 (HDZero)
Camera Adjustable Angle: 0-40°
Motors: 1102 22000KV Motor
Battery: BT2.0 550mAh 1S Battery
Frame: Meteor75 Pro Brushless Whoop Frame
Propellers: Gemfan 45mm 3-Blade Propellers
Canopy: BETAFPV Micro Canopy Lite
Weight Without Battery: 35.77g (Walksnail)/34.87g (HDZero)
Receiver: Serial ELRS 2.4G/SPI Frsky/TBS
FC&ampESC: F4 1S 5A FC (Serial ELRS 2.4G) V2.0/F4 1S 5A FC (SPI Frsky) V3.0
VTX Power Output: 350mW (Walksnail), 25mW/200mW (HDZero)
VTX: Walksnail Avatar HD Mini 1S Lite Kit/HDZero Whoop Lite Bundle
Camera: Wanlksnail Avatar Lite Camera/HDZero Nano Lite Camera

FAQ

Download the FC firmware and CLI dump file for Walksnail and HDZero version.
Click to download the manual for Walksnail Avatar HD Mini 1S Lite Kit.
Click to download the manual for HDZero Whoop Lite Bundle.


Includes

1x BetaFPV BNF Meteor75 Pro 1S Brushless Whoop w/ HDZero &amp Nano Lite Cam (BT2.0) - Choose Your Receiver
2x BT2.0 550mAh 1S Battery
1x Type-C USB Cable
1x BT2.0 Battery Charger and Voltage Tester
4x 45mm 3-Blade Props (1.5mm Shaft)
1x Screwdriver
1x VTX USB Cable (Walksnail or HDZero Version)
1x Pack of Screws


All products with batteries must be shipped by a ground shipping method. Check out the this BNF Meteor75 Pro HD 1S Brushless Whoop from BETAFPV. This quad is impressive with its clean aesthetic and its down right power performance.  BETAFPV wants you to know this is the largest 1S digital whoop you can get today. This 

BetaFPV BNF Meteor75 Pro HD 1S Brushless Whoop w/ Walksnail Avatar & Nano Cam (BT2.0) - Choose Your Receiver

BetaFPV BNF Meteor75 Pro HD 1S Brushless Whoop w/ Walksnail Avatar & N

Pre-Orders shipping ASAP! TBS version in stock and shipping same day! All products with batteries must be shipped by a ground shipping method.
Check out the this BNF Meteor75 Pro HD 1S Brushless Whoop from BETAFPV. This quad is impressive with its clean aesthetic and its down right power performance.  BETAFPV wants you to know this is the largest 1S digital whoop you can get today. This BNF will feature a F4 1S 5A FC, with 1102 22000Kv motors and ideally you would want a 550mAh 1S Battery to use with this quad. With this frame, you will get to see a more roomier battery slot for ease of use, as well as to able to accommodate  a bigger battery. 
Note: The Frsky version reserves two UART ports for the available external receiver so it can be used as PNP. 
Make sure to check out our other Pre-Built quads and the rest of our BetaFPV selection!
Features

The upgraded frame that fits 45mm props perfectly makes Meteor75 Pro the largest 1S whoop drone. Powered with 1102 22000KV motors, it performs smoothly in the air and is maneuverable for freestyle tricks.
It features a roomier battery slot that can accommodate a bigger battery such as BT2.0 550mAh 1S battery, which provides a larger capacity and higher discharge rate, bringing more flight time and robust flight performance to the quadcopter.

Micro Canopy Lite has an adjustable camera lens of 0-40°. This new canopy weighs only 1.1g, which is very suitable for HD digital VTX drone, and the open design makes the electronics cooler better.

Equipped with F4 1S 5A flight controller (Serial ELRS 2.4G or SPI Frsky). The ELRS 2.4G RX version comes with the default ELRS V2.0 firmware and supports being upgraded to ELRS V3.0 separately without flashing Betaflight flight controller firmware. The SPI Frsky version can be also used as the PNP version to connect external receiver due to the two UART ports on the board.

The various colors of the spare parts including the Meteor75 Pro frame and Micro
Reserve two UART ports on F4 1S 5A FC(SPI Frsky) V3.0 board. The Frsky version also can be used as the PNP version. Therefore, pilots can connect the external receiver to it.

Ultralight weight for Meteor75 Pro HD 35.77g (Walksnail)/ 34.87g (HDZero), this largest 1S drone combined with Walksnail or HDZero HD digital VTX system gives pilots an immersive flight experience and impactful visuals.

HD Digital VTX System
The Walksnail Avatar HD Mini 1S Lite uses H.265 high-efficiency video coding, an industry-leading technology, providing 1080P/60FPS image recording with 22ms ultra-low latency. It is specially designed for 3.1-5V power input and 7.8g lightweight, compatible with 1S whoop drone. Built-in 8 GB storage, this VTX has the capability of recording HD video without interference from capacity and exporting video by USB cable. Besides, with Canvas Mode, Betaflight full OSD display is supported and can be adjusted easily by remote control.
Note: Please make sure that the battery voltage must be 3.1V at least when flying, otherwise, the HD digital VTX would stop working.
Flight Controller
The latest F4 1S 5A flight controllers are applied to all BNF versions of Meteor75 HD. It features Serial ELRS 2.4G instead of SPI ELRS 2.4G for ELRS version compared to the previous version. The Frsky version reserves two UART ports for the available external receiver so it can be used as PNP. The ESC on the new board is powered by BB51 hardware in place of BB21. Last but not least, we update the gyro to BOSH BMI270 for better performance and stability since the new F4 1S 5A FC.




Meteor75 Pro HD (ELRS)


Meteor75 Pro HD (Frsky, PNP, TBS)



FC Inside
F4 1S 5A FC (Serial ELRS 2.4G) V2.0
F4 1S 5A FC (SPI Frsky) V3.0




Gyro
BMI270
BMI270




FC Firmware
BETAFPVF411
BETAFPVF411RX




UART Port
One UART Port
Two UART Ports




External RX
Not Supported
Supported




Note: Pay attention, ONLY the newest Betaflight firmware 4.3.1 start to support this BMI270 gyrometer. Please check the below link to download the firmware and CLI dump file. If you update the 4.3.1 firmware from Betaflight official site, please flash the CLI dump file for Meteor75 HD.
Micro Canopy Lite
Micro Canopy Lite is specially designed to be compatible with HD digital VTX and has an adjustable camera lens of 0-40°. By using the new Micro Canopy Lite, the weight of the drone is reduced, which in turn can improve flight performance and increase flight time. The open design helps to dissipate heat more effectively, reducing the risk of damage to the VTX or other electronic components inside the drone.
Endurance Boosting Battery
With the new BT2.0 550mAh 1S battery, Meteor75 Pro HD ensures more flight time up to 5:30 (Walksnail)/5:40 (HDZero) so that pilots can less worry about the battery. What&#39s more, it has a discharge of 40C (continuous) and 80C (burst), bringing a robust flight experience to pilots.
Meteor HD Series

BETAFPV has bee..

Pre-Orders shipping ASAP! TBS version in stock and shipping same day! All products with batteries must be shipped by a ground shipping method. Check out the this BNF Meteor75 Pro HD 1S Brushless Whoop from BETAFPV. This quad is impressive with its clean aesthetic and its down right power performance.  BETAFPV wants you