FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Continuous Amp Rating

Hobbywing

Hobbywing XRotor Micro 32Bit 60A 4-6S 30x30 4in1 ESC w/ BEC

The Hobbywing Xrotor Micro 60A 6S 4 in 1 ESC Dshot1200. A powerful ESC with 32bit BLHeli capabilities. Tons of power, with reliable performance.
Features

High performance 32-bit microprocessor with the running frequency of up to 48MHz for excellent performance.
BLHeli_32 firmware is the third generation BLHeli, following base BLHeli and BLHeli-S.
All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
The code supports features to prevent sync loss. There are tunable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments.
The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us) and Multishot (5-25us).
Dshot signaling is supported at any rate up to at least Dshot1200. The input signal is automatically detected by the ESC upon power up.
The code also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttle. This can be very useful for finding lost crafts.
On board 10V &amp5V BEC , powering different accessories such as FC , VTX ,Camera and LED lights and etc. 

Specifications




Model

XRotor Micro 60A 4in1 BLHeli32 6S



SKU

30902090


Application
FPVs with 130-280mm Diagonal Wheelbase


LiPo Power input
3S-6S



Cont.Current

60Ax4


Burst Current
80Ax4


BEC Output

5V@1.5A / 10V@1.5A



Input wires
12AWG-130mm* (Red/Black)


Output Wire
No wires but solder tabs


Connectors(In/Out)
XT60 (w/ Wires Soldered on) /no 


Weight / Size
15.0g / 32.7x18.4x6.2mm


Mounting holes
30.5x30.5mm






Throttle Calibration
Supported


ESC Programming
BLHeliSuite32


DEO
Supported


OneShot Mode
Supported


Timing
Supported


Motor Rotation
Supported



* Note: All the wire length above is the original length, not the length you see from the outside. 

Hobbywing Xrotor Micro 60A 6S 4 in 1 ESC Dshot1200 | The Hobbywing Xrotor Micro 60A 6S 4 in 1 ESC Dshot1200. A powerful ESC with 32bit BLHeli capabilities. Tons of power, with reliable performance.FeaturesHigh performance 32-bit microprocessor with the ru

Hobbywing Xrotor Micro 60A 6S 4 in 1 ESC Dshot1200

Hobbywing Xrotor Micro 60A 6S 4 in 1 ESC Dshot1200 | Hobbywing

Hobbywing's XRotor 60A 4-in-1 ESC raises the bar for ESCs. Hobbywing electronics are rock solid and the 60A ESC is no exception. Extra focus was put into this ESC to make it extremely reliable for any setup you are running.

Hobbywing XRotor Micro 60A 6S 4-in-1 BLHeli32 ESC

HobbyWing

Welcome the latest and greatest from HobbyWing, the Xrotor 60a BLHeli32 4in1 ESC! You have seen some of the top FPV pilots expressing how much they like the new ESC from HobbyWing, and what they have to say is no joke if you have ever ran HobbyWing electronics then you know that you can guarantee a well built high quality product. The new ESC has holes to run your capacitor directly off the board and also supports an ESC plug or solder pads to give you all the options you can need. Get yours today!

Get the HobbyWing XRotor 4in1 Micro 60A ESC shipped fast from the best source for all your FPV gear, RMRC! Free shipping for qualified orders using the shipping deal. 

HobbyWing XRotor 4in1 60A ESC BLHeli32 - Get Yours Today! - RMRC

HobbyWing XRotor 4in1 Micro 60A ESC BLHeli32 (3-6S)

Single / 4-in-1 ESC

The ESC(s) controls your motors’ speed. It draws power from the battery to spin the motors based on what the FC tells it to do. Each motor needs an ESC. It’s common today to see 4-in-1 ESCs so you only need to buy a single part. For beginners, choose a 4-in-1 ESC that has a compatible mount with your frame and FC. The biggest consideration is amperage limit. We show you ESCs with appropriate amperage limits based on your frame size. You can calculate how much amperage you need based on your motor and prop choice. 

ESCs

ESC Stack Mount

Firmware

Minimum Voltage

Maximum Voltage

Hobbywing XRotor Micro 65A 32Bit 4-6S 30x30 4in1 ESC

Hobbywing's XRotor 65A 4-in-1 ESC raises the bar for ESCs. Hobbywing electronics are rock solid and the 65A ESC is no exception. Extra focus was put into this ESC to make it extremely reliable for any setup you are running.

Hobbywing XRotor Micro 65A 6S BLHeli_32 4-in-1 ESC - 30x30


If you never want to worry about your your 4-in-1 again, Hobbywing's XRotor 65A raises the bar once again! From Captain Vanover himself, this thing is "bullet proof". No matter what type of flight style you choose, this should be a go-to 4-in-1 for everyone! The soft mounts prevent most of the vibration from being transferred to the FC. From freestyle to racing, even long range will not challenge this ESC. The 65A Micro 4-in-1 ESC comes loaded with the latest 32bit tech (the third generation BLHeli_32 code can support up to 128KHz PWM output frequency), DShot1200, Larger FETs, direct pins for a capacitor, and a choice of either a plug n play ESC connector or solder pads for the flight controller.
Features

High-performance 32-bit microprocessor with a running frequency of up to 120MHz for excellent performance.

The third generation BLHeli_32 code can support up to 128KHz PWM output frequency, which can be compatible with more motors.
All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
The code supports features to prevent sync loss. There are tunable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments.
The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us), and Multishot (5-25us).
Dshot signaling is supported at any rate up to at least Dshot1200. The input signal is automatically detected by the ESC upon power-up.
The code also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttles. This can be very useful for finding lost crafts.


Specifications

LiPo Power input: 3S-6S
Cont.Current: 65Ax4
Burst Current: 80Ax4
BEC Output: 5V@ 0.6A
Input wires: 12AWG-130mm (Red/Black)
Output Wire: No wires but solder tabs
Connectors: (In/Out) XT60 (w/ Wires Soldered on) /no
Weight: 15.0g 
Size: 52x42x6.6mm
Mounting holes: 30.5x30.5mm
Throttle Calibration: Supported
ESC Programming: BLHeliSuite32

Includes

1x Hobbywing XRotor Micro 32bit 65A 4-6S 30x30 4in1 ESC w/ BEC


If you never want to worry about your your 4-in-1 again, Hobbywing's XRotor 65A raises the bar once again! From Captain Vanover himself, this thing is "bullet proof". No matter what type of flight style you choose, this should be a go-to 4-in-1 for everyone! The soft mounts prevent most of the vibration from being tran

Hobbywing XRotor Micro 32Bit 65A 4-6S 30x30 4in1 ESC from WREKD Co.

Hobbywing XRotor Micro 32Bit 65A 4-6S 30x30 4in1 ESC

HOBBYWING

If you never want to worry about your your 4-in-1 again, Hobbywing's XRotor 65A raises the bar once again! From Captain Vanover himself, this thing is "bullet proof". No matter what type of flight style you choose, this should be a go-to 4-in-1 for everyone! The soft mounts prevent most of the vibration from being transferred to the FC. From freestyle to racing, even long range will not challenge this ESC. The 65A Micro 4-in-1 ESC comes loaded with the latest 32bit tech (the third generation BLHeli_32 code can support up to 128KHz PWM output frequency), DShot1200, Larger FETs, direct pins for a capacitor, and a choice of either a plug n play ESC connector or solder pads for the flight controller.
Check out all our 4in1 ESCs, all our 30x30 ECSs, and all our Hobbywing products!
Features

High-performance 32-bit microprocessor with a running frequency of up to 120MHz for excellent performance.

The third generation BLHeli_32 code can support up to 128KHz PWM output frequency, which can be compatible with more motors.
All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
The code supports features to prevent sync loss. There are tunable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments.
The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us), and Multishot (5-25us).
Dshot signaling is supported at any rate up to at least Dshot1200. The input signal is automatically detected by the ESC upon power-up.
The code also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttles. This can be very useful for finding lost crafts.






Specifications

LiPo Power input: 3S-6S
Cont.Current: 65Ax4
Burst Current: 80Ax4
BEC Output: 5V@ 0.6A
Input wires: 12AWG-130mm (Red/Black)
Output Wire: No wires but solder tabs
Connectors: (In/Out) XT60 (w/ Wires Soldered on) /no
Weight: 15.0g 
Size: 52x42x6.6mm
Mounting holes: 30.5x30.5mm
Throttle Calibration: Supported
ESC Programming: BLHeliSuite32

Includes

1x Hobbywing XRotor Micro 32bit 65A 4-6S 30x30 4in1 ESC w/ BEC


HolyBro

Holybro Tekko32 F4 Metal 32Bit 65A 30x30 4in1 ESC

HOLYBRO

Holybro's Tekko32 series is a staple ESC in the drone world, and now they have a brand new model. This version boasts up to 65A of current, and a new F4 processor to make it run smoother.
Check out the rest of our 30x30 ESCs, as well as the rest of our Holybro offerings!
Specifications

Input Voltage: 4-6s Lipo
Continuous Current: 65A
Burst Current: 70A 10S
BEC: No
Software: DShot300/600/1200
Telemetry: Yes
Mounting: 30x30mm
Dimensions: 46x44mm
Weight: 15.8gHolybro

Includes

1x Holybro Tekko32 F4 Metal 32Bit 65A 30x30 4in1 ESC
2x 8pin Cables
4x Soft Mount Grommets


Holybro's Tekko32 series is a staple ESC in the drone world, and now they have a brand new model. This version boasts up to 65A of current, and a new F4 processor to make it run smoother. Check out the rest of our 30x30 ESCs, as well as the rest of our Holybro offerings! Specifications Input Voltage: 4-6s Lipo Continuo

Holybro Tekko32 F4 Metal 32Bit 65A 30x30 4in1 ESC from WREKD Co.

Holybro's Tekko32 series is a staple ESC in the drone world, and now they have a brand new model. This version boasts up to 65A of current, and a new F4 processor to make it run smoother. Check out all our 30x30 4in1 Electronic Speed Controllers and the rest of our Holybro Collection! Specifications Input Voltage: 4-6s

Holybro Tekko32 F4 Metal 32Bit 65A 4in1 ESC - 30x30mm

Holybro

The all-new Tekko32 Metal is the first 4-in1- ESC in the market to adapt to the fast F4 MCU. Powerful &amp reliable metal-cased MOSFET 4-in-1 ESC with smooth control and quick response.

The all-new Tekko32 Metal is the first 4-in1- ESC in the market to adapt to the fast F4 MCU. Powerful & reliable metal-cased MOSFET 4-in-1 ESC with smooth control and quick response.

Holybro Tekko32 F4 Metal 65A 4-in-1 ESC

Holybro's Tekko32 series is a staple ESC in the drone world, and now they have a brand new model. This version boasts up to 65A of current, and a new F4 processor to make it run smoother.

Holybro Tekko32 F4 Metal 32Bit 65A 30x30 4in1 ESC - For Sale At RaceDayQuads

Diatone

Diatone Mamba 5 Reactor 44A 32Bit 4in1 ESC

Experience reliable power with the Diatone Mamba 5 Reactor 32Bit 44A 4-6S 20x20 4in1 ESC. This advanced ESC is designed to provide you with precise and smooth control for your quadcopter. Enjoy a responsive feel and the responsiveness of your craft, thanks to its 32-bit processor.  Check out all our 20x20 4in1 ESCs and

Diatone MAMBA 5 Reactor 44 ESC BL32 4IN1 ESC 44A 6S - 20x20mm

DIATONE












Experience reliable power with the Diatone Mamba 5 Reactor 32Bit 44A 4-6S 20x20 4in1 ESC. This advanced ESC is designed to provide you with precise and smooth control for your quadcopter. Enjoy a responsive feel and the responsiveness of your craft, thanks to its 32-bit processor. 











Check out all our 20x20 ESCs and all our Diatone Gear!
Specification

Input voltage: 4~6S Lipo (16.8V~25.2V)
Continue Current: 44A×4
Burst current: 54A (10S)
BEC: No
Target： BLHeli_32 MAMBA5_Reactor_44
SOFT: DSHOT300/600/1200/MAX2400（FETTEC）
PWM: 24~128K
Mounting size: 20mm, M2

Includes

1x Diatone Mamba 5 Reactor 32Bit 44A 4-6S 20x20 4in1 ESC
2x 8pin sh1.0 
1x AMASS Original XT60 
1x High Frequency 470uF/35V 


Experience reliable power with the Diatone Mamba 5 Reactor 32Bit 44A 4-6S 20x20 4in1 ESC. This advanced ESC is designed to provide you with precise and smooth control for your quadcopter. Enjoy a responsive feel and the responsiveness of your craft, thanks to its 32-bit processor.  Check out all our 20x20 ESCs and all 

Diatone Mamba 5 Reactor 32Bit 44A 4-6S 20x20 4in1 ESC

DiatoneUSA

Diatone Mamba 5 Reactor 32Bit 44A 4-6S 20x20 4in1 ESC from WREKD Co.

T-Motor

T-Motor Cine 80A 4-8S 32Bit 30x30 4in1 ESC

TMOTOR

The T-Motor Cine 80A ESC is perfect for your next cine rig! With its compact size &amp impressive 80A power, with burst capabilities of 90A this new T-Motor ESC is ready to carry your cameras anywhere!
Check out all of our 30x30 FCs and all our T-Motor products!
Features






Specifications

Input Voltage: 4-8S
Current: 80A
Peak Current: 90A
Firmware: BLHELI_32
MCU: STM32G071
Size: 52.5x52.5mm
Weight: 29.4g
Mounting Hole: 30.5x30.5mm / ⌀4mm

Includes

1x T-Motor Cine 80A 4-8S 30x30 4in1 ESC
1x XT60 male 12AWG cable
1x 50V 1000uF Capacitor
1x Set of dampers
1x 8pin cable set


The T-Motor Cine 80A ESC is perfect for your next cine rig! With its compact size &amp; impressive 80A power, with burst capabilities of 90A this new T-Motor ESC is ready to carry your cameras anywhere! Check out all of our 30x30 FCs and all our T-Motor products! Features Specifications Input Voltage: 4-8S Current: 80A

T-Motor Cine 80A 4-8S 30x30 32Bit 4in1 ESC

T-Motor Hobby

T-Motor Cine 80A 4-8S 30x30 32Bit 4in1 ESC from WREKD Co.

Tiger Motors

Experience seamless performance with the&nbspT-Motor Cine 80A ESC.

Experience seamless performance with the T-Motor Cine 80A ESC.

T-Motor Cine 80A 8S BLHeli_32 4-in-1 ESC - 30x30

T-Motor Mini F60A 4-8S 4-in-1 ESC

The future is here, and it's powered by T-Motor.
The T-Motor F60A Mini 4-8S 20x20 ESC is the key to unlocking a new world of aerial adventure. With 8S capability and monster MOSFETs, this ESC will take you to the edge of the universe and beyond, with power and performance that is out of this world.
But that's not all - when you explore our selection of 20x20 FCs and all our T-Motor products, you'll discover a galaxy of possibilities. From high-speed racing to aerial acrobatics, the sky is no longer the limit.
Specifications:

Input Voltage: 4-8S LiPo
Max. Continuous Current: 60A
Max Burst Current: 70A
Telemetry: Yes
Firmware: BLHeli_32
Input Signal: DShot 150/300/600/1200/MultiShot/OneShot
Mounting Pattern: 20x20mm M3
Dimensions: 36x47mm
Weight: 14g

Includes:

1x T-Motor F60A Mini 4-8S 20x20 ESC

The T-Motor F60A Mini 4-8S 20x20 ESC - it's not just the future of aerial technology, it's the future of adventure. Are you ready to explore the stars?

The future is here, and it's powered by T-Motor. The T-Motor F60A Mini 4-8S 20x20 ESC is the key to unlocking a new world of aerial adventure. With 8S capability and monster MOSFETs, this ESC will take you to the edge of the universe and beyond, with power and performance that is out of this world. But that's not all -

T-Motor F60A Mini 4-8S 20x20 ESC from WREKD Co.

T-Motor F60A Mini 4-8S 20x20 ESC

Five33





T-Motor enters the world of ESCs yet again with another that is sure to impress! 8S capable with monster mosfets! This ESC is ready to spin props and spin them fast!!













Axis Flying

Axis Flying 50A 32Bit 128K ESC

Axisflying

The&nbspAxisflying 50A ESC&nbsphas a 128K PMW output frequency with 32-Bit processor. This is a replacement ESC for the F7 Plug and Play&nbspiStack.

The Axisflying 50A ESC has a 128K PMW output frequency with 32-Bit processor. This is a replacement ESC for the F7 Plug and Play iStack.

AxisFlying 50A 128K 32-Bit ESC

Axis Flying Argus Mini 40A 32Bit 4in1 ESC

More efficient, faster, here is the Argus Mini 40A 4in1 ESC from the manufacturer Axis Flying.  Thanks to its AT32F421G8U7 processor , this ESC will guarantee you fast response and incredible performance in flight. It supports a continuous current of 40A which can peak up to 50A . Its PWM frequency can vary between 24 

AxisFlying Argus Mini 40A 4-6S BLHeli32 4in1 ESC - 20x20mm

Foxeer

Foxeer Reaper 80A F4 128K 32Bit 4-8S Single ESC

The Foxeer Reaper 80A F4 128K BL32 4-8S Single ESC is the next evolution of the Reaper ESC series. Thanks to the F4 processor, low heat generation, high-quality mosfets and excellent layout, this new version has a smoother flight performance and consistent power delivery. Check out all our Electronic Speed Controllers,

Foxeer Reaper 80A F4 128K BL32 4-8S Single ESC

Diatone Mamba F40 MK2 40A 4-6S 30x30 4in1 ESC

Replacement ESC for MAMBA F405 MKii StackCan also be used with other flight controllers. Description: INPUT VOLTAGE: 3~6S Lipo (12.6V~25V) CONTINUE CURRENT: 40A×4 BURST CURRENT: 50A (10S) BEC: NO MOUNTING: 30.5mm/M3 CURR: 169A Capacitance: Samsung 564UF(47UF×12pcs) About Current: 50A/4S OR 40A/5S (The same total power)

DIATONE ESC-MAMBA F40 MK2 4IN1 40A ESC DSHOT600 4-6S

Frame Stack Mount

The frame is typically the first part to pick because it determines what kind of flying you’ll be doing the most. Start by picking a frame type, and narrow down the options by propeller size. The frame holds your quad parts together and heavily impacts what the quad can do. 

Frames

FC Stack Mount

The FC is the brain or the CPU of your quad. It has a processor and other components that allow it to listen to your inputs and tells the quad what to do. FCs are commonly sold together with other components integrated or stacked (like ESCs and video transmitters). For beginners, choose a FC with a F4 or F7 processor that has a compatible mount with your frame. 