FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Continuous Amp Rating

Aikon

Aikon AK32 V3 32Bit 55A 3-6S 30x30 4in1 ESC

AIKON

The Aikon AK32 4-in-1 55A 6S is a new generation ESC that uses a variety of leading-edge technologies in hardware and firmware.
Make sure to check out our other ESCs and entire line of Aikon gear!

Features

New BLHeli_32 code base
Programmable PWM frequency of up to 48KHz
Auto-timing for higher efficiency and reliability
Voltage/Current sensing
Adjustable “Brake on Stop” force
Improve direction change in Bidirectional mode
ESC Telemetry (Voltage and RPMs only, no current)
Configuring from FC using DShot commands

Specifications

Battery: 3-6s
Constant Current: 55A
Burst Current: 70A (10s)
BEC: 5v 2A
Telemetry: Yes
Current Sensory: Yes
Current Sensor Scale: 210
Mount Hole: 30.5x30.5mm
Firmware: BLHeli32
MCU: STM32 F0
Weight (without wire): 18.5g

Includes

1x Aikon AK32 V3 32Bit 55A 6S 30x30 4in1 ESC


The Aikon AK32 4-in-1 55A 6S is a new generation ESC that uses a variety of leading-edge technologies in hardware and firmware. Make sure to check out our other ESCs and entire line of Aikon gear! Features New BLHeli_32 code base Programmable PWM frequency of up to 48KHz Auto-timing for higher efficiency and reliabilit

Aikon AK32 V3 32Bit 55A 6S 30x30 4in1 ESC

Welcome the latest and greatest from AIKON the Aikon AK32 55A 4IN1 ESC the newest edition to the FPV drone racers and FPV freestylers arsenal. The AK32 55A is a new generation ESC that uses a variety of bleeding edge technologies in hardware and firmware all packed into the a 30x30 layout. If you want the best for your

Aikon AK32 V3 55A 4in1 6S ESC - 30x30mm

Aikon AK32 V3 32Bit 55A 6S 30x30 4in1 ESC from WREKD Co.

Single / 4-in-1 ESC

The ESC(s) controls your motors’ speed. It draws power from the battery to spin the motors based on what the FC tells it to do. Each motor needs an ESC. It’s common today to see 4-in-1 ESCs so you only need to buy a single part. For beginners, choose a 4-in-1 ESC that has a compatible mount with your frame and FC. The biggest consideration is amperage limit. We show you ESCs with appropriate amperage limits based on your frame size. You can calculate how much amperage you need based on your motor and prop choice. 

ESCs

ESC Stack Mount

Firmware

Minimum Voltage

Maximum Voltage

T-Motor

T-Motor Cine55A 55A 32Bit 3-8S 30X30 8-in-1 ESC

TMOTOR

The T-Motor Cine 55A BLHeli_32 8-In-1 3-8S ESC (30X30). This ESC is perfect for large Cinelifters running 8 motors and up to 8S voltage! This ESC makes building a breeze as you no longer need to wire up two 4-in-1 ESCs. Combine this ESC with the T-Motor F7 Pro Flight Controller and make wiring even easier as the ESC and FC can connect with just one wire harness!
 Check out our other ESCs and the rest of the T-Motor line-up!
Features

Perfect for large Cinelifters running 8 motors and up to 8S voltage
Combine this ESC with the T-Motor F7 Pro Flight Controller and make wiring even easier as the ESC and FC can connect with just one wire harness
48 full-size imported MOs on board
Doubled-sized matte black heatsink
118 filtering capacitors on board
External dual capacitor pad
Extended telemetry transmission








Specifications

Rated Current: 8x55A
Peak Current: 8x65A
Input Voltage: 3-8s
Weight: 64g
Dimensions: 95.2x53x8.2mm
Amperage Meter Scale: 100
PWM frequency: 16-128K 
Mounting holes: 30.5x30.5 M3


Includes

1x T-Motor Cine-55A 32Bit 55A 3-8S 30x30 8in1 ESC
1x 200mm 10AWG XT60 Power Cable
8x Short silicone shock-absorbing washer
8x Long silicone shock-absorbing washer
2x SH1.0-8P connectors
2x SH1.0-10P connectors
1x Double-sided SH1.0 FC connector hardness
1x Single-sided SH1.0 FC connector hardness
2x Capacitor
1x QC PASS Card
2x Stickers


The T-Motor Cine 55A BLHeli_32 8-In-1 3-8S ESC (30X30). This ESC is perfect for large Cinelifters running 8 motors and up to 8S voltage! This ESC makes building a breeze as you no longer need to wire up two 4-in-1 ESCs. Combine this ESC with the T-Motor F7 Pro Flight Controller and make wiring even easier as the ESC an

T-Motor Cine-55A 32Bit 55A 3-8S 30x30 8in1 ESC

Introducing T-Motors new 30x30mm 8-in-1 ESC. Perfect for large Cinelifter's running 8 motors and up to 8S voltage. This ESC makes building a breeze as you no longer need to wire up two 4-in-1 ESC's. Combine this ESC with the T-Motor F7 Pro flight controller and wiring is even easier as the ESC and FC can connect with j

T-Motor Cine55A 55A 8-in-1 BLHeli_32 ESC 3-8S - 30x30mm

T-Motor Cine-55A 32Bit 55A 3-8S 30x30 8in1 ESC from WREKD Co.

Hobbywing

Hobbywing XRotor Micro 65A 32Bit 4-6S 30x30 4in1 ESC

HOBBYWING

If you never want to worry about your your 4-in-1 again, Hobbywing's XRotor 65A raises the bar once again! From Captain Vanover himself, this thing is "bullet proof". No matter what type of flight style you choose, this should be a go-to 4-in-1 for everyone! The soft mounts prevent most of the vibration from being transferred to the FC. From freestyle to racing, even long range will not challenge this ESC. The 65A Micro 4-in-1 ESC comes loaded with the latest 32bit tech (the third generation BLHeli_32 code can support up to 128KHz PWM output frequency), DShot1200, Larger FETs, direct pins for a capacitor, and a choice of either a plug n play ESC connector or solder pads for the flight controller.
Check out all our 4in1 ESCs, all our 30x30 ECSs, and all our Hobbywing products!
Features

High-performance 32-bit microprocessor with a running frequency of up to 120MHz for excellent performance.

The third generation BLHeli_32 code can support up to 128KHz PWM output frequency, which can be compatible with more motors.
All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
The code supports features to prevent sync loss. There are tunable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments.
The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us), and Multishot (5-25us).
Dshot signaling is supported at any rate up to at least Dshot1200. The input signal is automatically detected by the ESC upon power-up.
The code also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttles. This can be very useful for finding lost crafts.






Specifications

LiPo Power input: 3S-6S
Cont.Current: 65Ax4
Burst Current: 80Ax4
BEC Output: 5V@ 0.6A
Input wires: 12AWG-130mm (Red/Black)
Output Wire: No wires but solder tabs
Connectors: (In/Out) XT60 (w/ Wires Soldered on) /no
Weight: 15.0g 
Size: 52x42x6.6mm
Mounting holes: 30.5x30.5mm
Throttle Calibration: Supported
ESC Programming: BLHeliSuite32

Includes

1x Hobbywing XRotor Micro 32bit 65A 4-6S 30x30 4in1 ESC w/ BEC


If you never want to worry about your your 4-in-1 again, Hobbywing's XRotor 65A raises the bar once again! From Captain Vanover himself, this thing is "bullet proof". No matter what type of flight style you choose, this should be a go-to 4-in-1 for everyone! The soft mounts prevent most of the vibration from being tran

Hobbywing XRotor Micro 32Bit 65A 4-6S 30x30 4in1 ESC

Hobbywing's XRotor 65A 4-in-1 ESC raises the bar for ESCs. Hobbywing electronics are rock solid and the 65A ESC is no exception. Extra focus was put into this ESC to make it extremely reliable for any setup you are running.

Hobbywing XRotor Micro 65A 6S BLHeli_32 4-in-1 ESC - 30x30

Hobbywing XRotor Micro 32Bit 65A 4-6S 30x30 4in1 ESC from WREKD Co.


If you never want to worry about your your 4-in-1 again, Hobbywing's XRotor 65A raises the bar once again! From Captain Vanover himself, this thing is "bullet proof". No matter what type of flight style you choose, this should be a go-to 4-in-1 for everyone! The soft mounts prevent most of the vibration from being transferred to the FC. From freestyle to racing, even long range will not challenge this ESC. The 65A Micro 4-in-1 ESC comes loaded with the latest 32bit tech (the third generation BLHeli_32 code can support up to 128KHz PWM output frequency), DShot1200, Larger FETs, direct pins for a capacitor, and a choice of either a plug n play ESC connector or solder pads for the flight controller.
Features

High-performance 32-bit microprocessor with a running frequency of up to 120MHz for excellent performance.

The third generation BLHeli_32 code can support up to 128KHz PWM output frequency, which can be compatible with more motors.
All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
The code supports features to prevent sync loss. There are tunable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments.
The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us), and Multishot (5-25us).
Dshot signaling is supported at any rate up to at least Dshot1200. The input signal is automatically detected by the ESC upon power-up.
The code also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttles. This can be very useful for finding lost crafts.


Specifications

LiPo Power input: 3S-6S
Cont.Current: 65Ax4
Burst Current: 80Ax4
BEC Output: 5V@ 0.6A
Input wires: 12AWG-130mm (Red/Black)
Output Wire: No wires but solder tabs
Connectors: (In/Out) XT60 (w/ Wires Soldered on) /no
Weight: 15.0g 
Size: 52x42x6.6mm
Mounting holes: 30.5x30.5mm
Throttle Calibration: Supported
ESC Programming: BLHeliSuite32

Includes

1x Hobbywing XRotor Micro 32bit 65A 4-6S 30x30 4in1 ESC w/ BEC


EMAX

EMAX F4 Magnum II 35A 3-6S 32Bit 4in1 ESC

EMAX F4 Magnum II - 4in1 ESC 45amp 3-6s BlHeli 32 Dshot 1200 Replacement part for Buzz Freestyle quadcopter.

EMAX F4 Magnum II - 4in1 ESC 35amp 3-6s BlHeli 32 Dshot 1200

Emax

Replacement part for Buzz Freestyle quadcopter.
l Continuous current 35A ( max burst 40A)
l Supply voltage 3-6S Lipo
l STM32F051K6U6 MCU
l BLHeli_32 firmware,support DSHOT,MULTISHOT,ONESHOT125
l Top quality MOSFET
l 3oz high TG PCB board
l 32x37mm board with 20mm mounting holes.


Please refer to the Buzz owner manual for additional information. 

Replacement part for Buzz Freestyle quadcopter. l Continuous current 35A ( max burst 40A) l Supply voltage 3-6S Lipo l STM32F051K6U6 MCU l BLHeli_32 firmware,support DSHOT,MULTISHOT,ONESHOT125 l Top quality MOSFET l 3oz high TG PCB board l 32x37mm board with 20mm mounting holes. Please refer to the Buzz owner manual fo

EMAX F4 Magnum II - 4in1 ESC 35amp 3-6s BlHeli 32 Dshot 1200 from WREKD Co.

T-Motor VELOX V50A 32Bit 50A 3-6S 30x30 4in1 ESC

T-Motor VELOX V50A 3-6S BLHeli_32 4-in-1 ESC

The best quality First Person View equipment. Free or discounted shipping on all orders.Drone Racing, RC Airplanes, FPV Cameras, FPV Goggles, Video Transmitters, RC Quads, Drone Antennas, Lipo Batteries, and Ground Station Equipment.All available for amateurs, schools, hobbyists, government, and wholesale buyers.

T-Motor VELOX V50A 3-6S BLHeli_32 4-in-1 ESC - RMRC

Tiger Motors

The&nbspVelox V50A 4-in-1 ESC by T-Motor&nbspis the ultimate ESC for your build. Adopting the QN3109 1.5 MOS, the V50A has been upgraded with an 18% performance increase to fly in confidence even during high-current spikes.

The Velox V50A 4-in-1 ESC by T-Motor is the ultimate ESC for your build. Adopting the QN3109 1.5 MOS, the V50A has been upgraded with an 18% performance increase to fly in confidence even during high-current spikes.

TMotor's popular Velox ESC is back and better than ever in a new green color with upgraded components such as higher quality MOSFETS and larger solder pads!
Check out the 30x30 4in1 ESCs and all our T-Motor products!
Specifications

Input Voltage: 3-6S
Max Continuous Current: 50A
Max Burst Current: 55A
Firmware: TMOTOR T4 02 
Dimensions: 45.4X43.8X8MM
Mounting Dimensions: 30X30MM
Weight: 18.5g

Includes

1x T-Motor Velox V50A 32Bit 4-In-1 ESC
1x 8P/10P Exchangeable Wiring Harness
1x 8P/8P Silicone Wiring Harness 
1x XT60 14AWG 145mm Cable
4x Shock Absorbing Washer
1x Capacitor








TMotor's popular Velox ESC is back and better than ever in a new green color with upgraded components such as higher quality MOSFETS and larger solder pads! Check out the 30x30 4in1 ESCs and all our T-Motor products! Specifications Input Voltage: 3-6S Max Continuous Current: 50A Max Burst Current: 55A Firmware: TMOTOR 

T-Motor Velox V50A 32Bit 50A 3-6S 30x30 4in1 ESC

The T-Motor Velox V50A 4-In-1 is a high-performance ESC from one of the best manufacturers in the hobby. With higher quality MOSFETS, large solder pads, dioxygen heat sink with excellent heat dispersion, and more features, this is certainly a worthy upgrade. Check out our other Electronic Speed Controllers and all our 

T-Motor Velox V50A 6S BLheli-32 4IN1 ESC - 30*30

T-Motor Hobby

T-Motor Velox V50A 32Bit 50A 3-6S 30x30 4in1 ESC from WREKD Co.

T-Motor VELOX V50A SE 32Bit 4in1 ESC

T-Motor VELOX V50A-SE 3-6S BLHeli_32 4-in-1 ESC

T-Motor VELOX V50A-SE 3-6S BLHeli_32 4-in-1 ESC - RMRC

Introducing the T-Motor Velox V50A SE 6S BLHeli_32 4-in-1 ESC, the pinnacle of electronic speed controllers for high-performance drones. 

T-Motor Velox V50A SE 6S BLHeli_32 4-in-1 ESC














T-Motor V50A SE 50A 32bit 3-6S ESC is the perfect solution for powerful and efficient flights. With its 32-bit processor, 3-6S input power, and 30x30mm size, this ESC is designed to give you solid flight performance. Reliable, secure, and efficient - this ESC is engineered to help you maximize your time in the sky.













Check out the 30x30 4in1 ESCs and all our T-Motor products!

Specification

MCU: AT32F421

Input Voltage: 3-6S

Current: 50A

Peak Current(5S): 60A

Size: 41x44.4x5.8mm

Mounting Holes: 30.5x30.5/Φ4mm
Weight: 12.3g

Includes

1x T-Motor V50A SE 50A 32Bit 3-6S 30x30 4in1 ESC


T-Motor V50A SE 50A 32bit 3-6S ESC is the perfect solution for powerful and efficient flights. With its 32-bit processor, 3-6S input power, and 30x30mm size, this ESC is designed to give you solid flight performance. Reliable, secure, and efficient - this ESC is engineered to help you maximize your time in the sky. Che

T-Motor V50A SE 50A F4 32Bit 3-6S 30x30 4in1 ESC from WREKD Co.

T-Motor V50A SE 50A F4 32Bit 3-6S 30x30 4in1 ESC

The T-Motor Velox V50A SE 4-In-1 is a high-performance ESC from one of the best manufacturers in the hobby. With higher quality MOSFETS, large solder pads and more features, this is certainly a worthy upgrade. Check out our other Electronic Speed Controllers and all the T-Motor Products! Collection. Specifications: Mod

T-Motor Velox V50A SE 6S BLheli-32 4IN1 ESC - 30x30mm

T-Motor P60A V2 60A 32Bit 3-6S 30x30 4in1 ESC

The T-Motor P60A V2 is a powerful 3-6S 4-in-1 128K ESC with 128K PWM and BLHeli_32 firmware that supports Dshot2400.

T-Motor P60A V2 3-6S Dshot2400 4-in-1 BLHeli_32 128K ESC - 30.5x30.5

Introducing the T-Motor P60A V2 32Bit 3-6S 30x30 4in1 ESC.  This ESC is meant for demanding quads focusing on high speed. Along side the support of Dshot2400, this ESC will give you more precision in your controls. This ESC supports adjustable PWM frequencies from 16KHz to 128KHz allowing a wide range of flying styles to master! 
Check out the 30x30 4in1 ESCs and all our T-Motor products!
Features

Adapts to a variety of FC and supports Betaflight/Alpha/Emuflight

Supports Dshot2400
Two-color cooling shell with fin stripe design to keep fast heat dissipation
Supports telemetry to return ESC data, Voltage parameters can be read via telemetry data
Supports a wide PWM frequency range. 
Suitable for 5-7" FPV freestyle/racing/cinematic/long range


Specifications

Input Voltage: 3-6S
Current: 4x60A
Burst Current: 4x70A
ESC Software: BLHeli_32
PWM Frequency: 16-128KHz
Dimensions: 41x45x7.2mm
Weight: 22g
Mounting Pattern: 30.5x30.5mm

Includes

1x T-Motor P60A V2 60A 32Bit 3-6S 30x30 4in1 ESC
1x Accessory Kit


Introducing the T-Motor P60A V2 32Bit 3-6S 30x30 4in1 ESC.  This ESC is meant for demanding quads focusing on high speed. Along side the support of Dshot2400, this ESC will give you more precision in your controls. This ESC supports adjustable PWM frequencies from 16KHz to 128KHz allowing a wide range of flying styles 

T-Motor P60A V2 60A 32Bit 3-6S 30x30 4in1 ESC from WREKD Co.

T-Motor Mini F45A 32Bit 45A 3-6S 20x20 4in1 ESC

T-Motor fits a powerful ESC into a tiny little package. Also available in Solder-Free!
Specifications

Input Voltage: 3-6S
ESC Firmware: BLHeli32
Telemetry: Supported
Galvanometer: Supported
DSHOT 150/DSHOT 300/DSHOT 600/PROSHOT 1000
Backward Compatible with Oneshot125/Oneshot42/Multishot
Betaflight Galvanometer Ratio: 200
Mounting Pitch: 20*20mm
Weight: 9.2g

Includes

1x F45 32Bit 45A 3-6S 20x20 4in1 ESC 

Wiring Diagram


Solder Free: Everything is 100% plug-n-play, the MR30 Quick Connection System makes assembly a breeze and removes the need for any soldering! T-Motor fits a powerful ESC into a tiny little package. With the upgrade of solder-free, you can get your ESC changed in a heartbeat or swap motors without opening up the frame. If you want to spend less time on repairs and more time on flying, this is the ESC for you!

F45 32Bit 45A 3-6S 20x20 4in1 ESC

The T-Motor Mini F45A 6S is a 4-in-1 ESC that comes with a 20x20 mounting pattern and 32-BIT for high performance and fast response! 

T-Motor Mini F45A 3-6S 32-Bit 20x20 4-in-1 ESC

The T-Motor Mini F45A 6S BLHeli32 4-in-1 ESC is loaded with lots of power! The Mini F45A 4-in-1 ESC comes with a high-performance 32-BIT main control and supports mainstream throttle signals like DSHOT150/DSHOT300, DSHOT600, and PROSHOT1000. Compatible with Oneshot125, Oneshot42, Multishot, and common PWN signals. 
Pair this ESC with the T-Motor Mini F7 for the ultimate combination of FC and ESC. 
Check out all our 20x20 FCs and all our T-Motor products!
Specification

Brand: T-Motor
Item Name: MINI F45A 4IN1 ESC
Input Voltage: 3-6S
ESC Firmware: BLHeli32
Telemetry: Support
Mounting pitch: 20x20mm
Weight: 9.2g
Betaflight galvanometer ratio: 200


Includes

1x T-Motor Mini F45A 6S BLHeli32 4-in-1 ESC


The T-Motor Mini F45A 6S BLHeli32 4-in-1 ESC is loaded with lots of power! The Mini F45A 4-in-1 ESC comes with a high-performance 32-BIT main control and supports mainstream throttle signals like DSHOT150/DSHOT300, DSHOT600, and PROSHOT1000. Compatible with Oneshot125, Oneshot42, Multishot, and common PWN signals.  Pai

T-Motor Mini F45A 6S 32Bit 4in1 ESC from WREKD Co.

T-Motor Mini F45A 6S 32Bit 4in1 ESC

Behold, the legendary mystical scroll that reveals the power of the T-Motor Mini F45A 6S BLHeli32 4-in-1 ESC!
This sacred artifact is imbued with immense power, thanks to its high-performance 32-BIT main control. It supports mainstream throttle signals like DSHOT150/DSHOT300, DSHOT600, and PROSHOT1000, and is compatible with Oneshot125, Oneshot42, Multishot, and common PWN signals.
For the ultimate combination of FC and ESC, pair the Mini F45A with the T-Motor Mini F7 and unlock a new level of flying.
But the power doesn't end there. Check out all our 20x20 FCs and all our T-Motor products and discover the full extent of your aerial potential.
Specifications:

Brand: T-Motor
Item Name: MINI F45A 4IN1 ESC
Input Voltage: 3-6S
ESC Firmware: BLHeli32
Telemetry: Support
Mounting pitch: 20x20mm
Weight: 9.2g
Betaflight galvanometer ratio: 200
EAN: 6971360351528


Includes:

1x T-Motor Mini F45A 6S BLHeli32 4-in-1 ESC


Unleash the power of the T-Motor Mini F45A 6S 4in1 ESC. High-performance 32-BIT control, compatibility with popular throttle signals. Explore now!

Five33

The T-Motor Mini F45A 6S BLHeli32 4-in-1 ESC is loaded with lots of power! The Mini F45A 4-in-1 ESC comes with the high-performance 32-BIT main control and supports mainstream throttle signals like DSHOT150/DSHOT300, DSHOT600, PROSHOT1000. Compatible with Oneshot125, Oneshot42, Multishot, and common PWN signals. 















The T-Motor Mini F45A 6S BLHeli32 4-in-1 ESC is loaded with lots of power, all in a 20x20 ESC!

T-Motor Mini F45A 6S BLHeli32 4-in-1 ESC

The T-Motor Mini F45A 6S BLHeli32 4-in-1 ESC has a 45A persistent current and 55A peak! The Mini F45A 4-in-1 ESC comes with reliable high quality mosfet and high-performance 32-BIT main controller it also supports mainstream throttle signals like DSHOT150/DSHOT300, DSHOT600, PROSHOT1000 and is also compatible with Ones

T-Motor Mini F45A 6S 4-in-1 ESC (BLHeli32) - 20x20mm

T-Motor F55A Pro II 32Bit 55A 3-6S 30x30 4in1 ESC w/ BEC

The T-motor F55 Pro II is a high performance ESC for the most demanding pilots. With carefully selected materials and a modest PCB layout, it will provide stable flight and reliability under load.
Specifications

Input Voltage: 3-6S
Max. Continuous Current: 55A
Max. Burst Current: 75A (10sec)
Firmware: BLheli32
Current Sensor: Yes
Mounting Dimensions: 30x30mm
Dimensions: 45.4x41x7.3mm
Weight: 17.5g (Including Heatsink)

Support DSHOT150/300/600/1200

Includes

1x F55A Pro II 4 in 1 Brushless ESC
5x Damping Rubbers
1x 12AWG-130MM with XT60 Soldered input wires
2x 61mm Signal wire
5x Cable Protectors
3x SH0.1mm Plugs(6/8/10)
1x Capacitor


The T-motor F55 Pro II is a high performance ESC for the most demanding pilots. With carefully selected materials and a modest PCB layout, it will provide stable flight and reliability under load. Specifications Input Voltage: 3-6S Max. Continuous Current: 55A Max. Burst Current: 75A (10sec) Firmware: BLheli32 Current 

F55 PRO II 32Bit 55A 3-6S 30x30 4in1 ESC

The F55A Pro II is a premium-built 4in1 ESC from T-Motor. Fully capable of pushing 6s with 75A burst and a sustained 55A current draw. Equipped with the latest in ESC technology such as 32-bit capability and BLHeli32 firmware.
Check out all our 30x30 ESCs and all our T-Motor products!



























Specifications

Continuous current: 4x55A
BLHeli_32 32bit
Burst current: 4x75A
BEC Output: 10V @2.0A
Size: 45x41x7.3mm
Weight: 17.3g (Including Heatsink)
Support DSHOT150/300/600/1200

Includes

1x F55A Pro II 4 in 1 Brushless ESC
5x Damping Rubbers
1x 12AWG-130MM with XT60 Soldered input wires
2x 61mm Signal wire
5x Cable Protectors
3x SH0.1mm Plugs(6/8/10)
1x Capacitor

 

For convenience and performance, you need the T-Motor F55A Pro 55A 3-6s BLHeli32 4-in-1 ESC. This easy to use package has the power you need at a price you'll love.

T-Motor F55A Pro II 32Bit 55A 3-6S 30x30 4in1 ESC

T-Motor F55A Pro 55A 3-6s BLHeli32 4-in-1 ESC for Sale

The new T-Motor's update of the F55A Pro II, the MCU F3 is a much faster ESC with high performance for demanding racing events. Just like the original, The F3 is fully capable of pushing 6s with 75A burst and a sustained 55A current draw. Equipped with the latest in ESC technology such as 32-bit capability and BLHeli32

T-Motor F55A Pro II 55A 3-6s BLHeli32 4-in-1 ESC

T-Motor F55A PROII-6S-4IN1FEATURESHigh-performance 32-bit microprocessor with the running frequency of up to 48MHz for an excellent performance.BLHeli_32 firmware is the third generation BLHeli, following base BLHeli and BLHeli-S.All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.The code supports features to prevent sync loss. There are tunable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments.The code supports regular 1-2ms pulse width input, as well as Oneshotl 25 (125-250us), Oneshot42 (41.7-83.3us) and Multishot (5-25us).Dshot signaling is supported at any rate up to at least Dshotl 200. The input signal is automatically detected by the ESC upon power-up.The code also supports a beacon functionality, where the ESC will start beeping after a given ti...

T-Motor F55A PROII-6S-4IN1 - RMRC

T-Motor F55A Pro II 55A 3-6s BLHeli32 4-in-1 ESC with BEC

The F55 Pro II updates the original F55 with a new heatsink design, LED, and increased the BEC current to 10V@2A.

T-Motor F55A Pro II 55A 3-6s BLHeli32 4-in-1 ESC w/ BEC



Solder-Free: Everything is 100% plug-n-play, the MR30 Quick Connection System makes assembly a breeze and removes the need for most soldering! Check out our other solder-free options.




The T-motor F55 Pro II is a high-performance ESC for the most demanding pilots. With carefully selected materials and a modest PCB layout, it will provide stable flight and reliability under load.
Now, you can get this tried and true ESC in a solder-free version! This allows you to quickly connect and change solder-free motors in seconds.  Now you can spend less time repairing and more time in the skies!
Specifications

Input Voltage: 3-6S
Max. Continuous Current: 55A
Max. Burst Current: 75A (10sec)
Firmware: BLheli32
Current Sensor: Yes
Mounting Dimensions: 30x30mm
Dimensions: 45.4x41x7.3mm
Weight: 17.5g (Including Heatsink)

Support DSHOT150/300/600/1200

Includes

1x F55 PRO II 32Bit 55A 3-6S 30x30 4in1 ESC Solder-Free
5x Damping Rubbers
1x 12AWG-130MM with XT60 Soldered input wires
5x Cable Protectors
1x Capacitor




Solder-Free: Everything is 100% plug-n-play, the MR30 Quick Connection System makes assembly a breeze and removes the need for most soldering! Check out our other solder-free options. The T-motor F55 Pro II is a high-performance ESC for the most demanding pilots. With carefully selected materials and a modest PCB layout, it will provide stable flight and reliability under load. Now, you can get this tried and true ESC in a solder-free version! This allows you to quickly connect and change solder-free motors in seconds. Now you can spend less time repairing and more time in the skies!

F55 PRO II 32Bit 55A 3-6S 30x30 4in1 ESC Solder-Free

Solder-Free: Everything is 100% plug-n-play, the MR30 Quick Connection System makes assembly a breeze and removes the need for most soldering! Check out our other solder-free options. The T-motor F55 Pro II is a high-performance ESC for the most demanding pilots. With carefully selected materials and a modest PCB layout, it will provide stable flight and reliability under load. Now, you can get this tried and true ESC in a solder-free version! This allows you to quickly connect and change solder-free motors in seconds. Now you can spend less time repairing and more time in the skies! Specifications Input Voltage: 3-6S Max. Continuous Current: 55A Max. Burst Current: 75A (10sec) Firmware: BLheli32 Current Sensor: Yes Mounting Dimensions: 30x30mm Dimensions: 45.4x41x7.3mm Weight: 17.5g (Including Heatsink) Support DSHOT150/300/600/1200 Includes 1x F55 PRO II 32Bit 55A 3-6S 30x30 4in1 ESC Solder-Free 5x Damping

The F55A Pro II is a premium-built 4in1 ESC from T-Motor. Fully capable of pushing 6s with 75A burst and a sustained 55A current draw. Equipped with the latest in ESC technology such as 32-bit capability and BLHeli32 firmware. Check out all our 30x30 ESCs and all our T-Motor products! Specifications Continuous current:

T-Motor F55A Pro II 32Bit 55A 3-6S 30x30 4in1 ESC from WREKD Co.



The latest version of T-Motor's F55A Pro II, the F3 ESC, offers higher speeds and enhanced performance perfect for intense racing. Its 6S capability and 75A burst current allow a sustained 55A draw, while BLHeli32 firmware and 32-bit technology ensure maximum safety and efficiency. An imported MOSSFET helps reduce heat and boost safety too.
 
FEATURES

High-performance 32-bit microprocessor with the running frequency of up to 48MHz for an excellent performance.
BLHeli_32 firmware is the third generation BLHeli, following base BLHeli and BLHeli-S.
All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
The code supports features to prevent sync loss. There are tunable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments.
The code supports regular 1-2ms pulse width input, as well as Oneshotl 25 (125-250us), Oneshot42 (41.7-83.3us) and Multishot (5-25us).
Dshot signaling is supported at any rate up to at least Dshotl 200. The input signal is automatically detected by the ESC upon power-up.
The code also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttles. This can be very useful for finding lost crafts.
Onboard 10V BEC, powering different accessories such as FC, VTx, Camera and LED lights and etc.

SPECIFICATIONS


Continuous current: 4*55A
BLHeli_32 32bit
Burst current: 4*75A
BEC Output: 10V @2.0A
Size: 45x41x7.3mm
Weight: 17.3g (Including Heatsink)
Support DSHOT150/300/600/1200

INCLUDES

1 x F55A Pro II 4 in 1 Brushless ESC
5 x Damping Rubbers
1 x 12AWG-130MM with XT60 Soldered input wires
2 x 61mm Signal wire
5x Cable Protectors
3x SH0.1mm Plugs(6/8/10)
1 x Capacitor



The latest version of T-Motor's F55A Pro II, the F3 ESC, offers higher speeds and enhanced performance perfect for intense racing. Its 6S capability and 75A burst current allow a sustained 55A draw, while BLHeli32 firmware and 32-bit technology ensure maximum safety and efficiency. An imported MOSSFET helps reduce heat

T-Motor F55A Pro II 55A 3-6s BLHeli32 4-in-1 ESC from WREKD Co.

T-Motor F35A 32Bit 35A 3-6S ESC

The T-Motor F35A 3-6S 32bit ESC is an excellent choice coming from a company with a pedigree of success. 
Browse our collection of ESCs and all our T-Motor products!

Features

Arm 32-bit Cortex core MCIJ, operating frequency up to 48MHz
BLHeli-32 firmware, fast response speed, superb performance
Auto-detection on throttle signal, support pulse width PWM (1 -2ms), Oneshot 125 (125-250us)
Dshot signal (up to Dshot 1200) compatible
Auto-braking for high efficiency. When the throttle is pulled down, the motor will react fast on such change to slow down
For racing drones with a motor of high Kv and power

Twisted pair(TP) throttle signal wires reduce the crosstalk during signal transmission which guarantees stable flight
Aluminum alloy radiator for cooling performance.

Specifications

Model No: F35A 32bit
Con. Current: 35A 
Peak Current (10S): 45A
Lipo: 3-6S
BEC: No
Weight: 4.3g
Size: 29x17x5mm

Includes

1 x T-Motor F35A 3-6S ESC


The T-Motor F35A 3-6S 32bit ESC is an excellent choice coming from a company with a pedigree of success.  Browse our collection of ESCs and all our T-Motor products! Features Arm 32-bit Cortex core MCIJ, operating frequency up to 48MHz BLHeli-32 firmware, fast response speed, superb performance Auto-detection on thrott

T-Motor F35A 3-6S 35A 32bit ESC

Need a 32 bit ESC from a name you can trust? TMotors FPV line of ESCs is the unsung hero for those who need power, quick response, and durability. This ESC pairs perfectly with their F40 II motors! Check out all our Electronic Speed Controllers and the rest of our T-Motor Products! Specifications: Firmware : BLHeli_32 

T-Motor F35A 32Bit 35A 3-6S Electronic Speed Controller

T-Motor F35A 3-6S 35A 32bit ESC from WREKD Co.

SpeedyBee

SpeedyBee V3 50A 32bit 3-6S 30x30 4in1 ESC

RUNCAM

The new SpeedyBee BL32 32bit 50A 3-6S 30x30 4in1 ESC comes packed with extras. The ESC is built with TVS protective diode to absorb the voltage spike when you plug in the battery, or during crashes that block your props. It also provides a humongous 1500uF low ESR capacitor, ensuring clean data from the gyro to the FC and tested by 2 top racing pilots, both over 1500 packs. It's also fitted with a high-quality CNC heat sink shield to significantly reduce the heat from your MOSFETs ensuring stable current flow at a high-throttle position. This ESC should have no issues with overheating. A great benefit in a stylish blue finish.
Check out all our 30x30 ESCs and all our Speedy Bee products!

Specifications
32Bit 50A 3-6S 4in1 ESC

Firmware: SpeedyBee BL32 50A

Continuous Current: 50Ax4

Burst Current: 55A(5S)
Power input: 3S - 6S LiPo

Power output: VBAT

Current Sensor: Supported (Scale=490 Offset=0)

Mounting: 30.5x0.5mm, 4mm hole size

Dimension: 45.6(L)x40(W)x8.8mm(H)

Weight: 19.2g with heat sink


Includes

1x SpeedyBee BL32 32bit 50A 3-6S 30x30 4in1 ESC

Wiring Diagram
 

The SpeedyBee BL32 32bit 50A 3-6S 30x30 4in1 ESC isn't just built for convenience, it is built for the performance that will fulfill all of your in flight needs. Choose the top ESC today!

SpeedyBee BL32 32bit 50A 3-6S 30x30 4in1 ESC

SpeedyBee BL32 32bit 50A 3-6S 30x30 4in1 ESC For Sale

Introducing the Speedybee 50A ESC! Now supporting up to 128kHz PWM frequency with an F4 processor. It also now comes with a heatsink, 1500uF Low ESR capacitor, and onboard TVS diodes to keep the FET's cool and absorb voltage spikes from damaging your components. We also carry the Stack!  Check out all our Electronic Sp

SpeedyBee 50A F4 128K BLHeli_32 2-6S 4in1 ESC - 30x30mm

The new SpeedyBee BL32 32bit 50A 3-6S 30x30 4in1 ESC comes packed with extras. The ESC is built with TVS protective diode to absorb the voltage spike when you plug in the battery, or during crashes that block your props. It also provides a humongous 1500uF low ESR capacitor, ensuring clean data from the gyro to the FC 

SpeedyBee BL32 32bit 50A 3-6S 30x30 4in1 ESC from WREKD Co.

NewBeeDrone

NewBeeDrone Cricket200 V2 55A 3-6S 4in1 ESC

NewBeeDrone Cricket200 V2 ESC
The Cricket200 V2 ESC are now fully covered by aluminum shield. Base on the first generation Cricket200 ESC, we also optimize the layout and the Power support for the whole system. The new double sided Heatsink/Aluminum Shield compare to single side Heatsink solution can provide better protection and heat dissipation. 
 

 

Cricket 200 ESC Spec:

LiPo Power input: 3S-6S
ESC Programming: BLHeli32
Cont.Current: 55Ax4
Burst Current: 65Ax4
Weight / Size: 13.0g / 39x29.5x8mm
Mounting holes: 20x20mm

Signal plug JST1.0 8pin plug with NBD Cricket200FC

Solder pad ready for signal and power
Heatsink design
8 Layer PCB with 2Oz Copper
Smoov performance design by Team NBD

Includes:

1x Cricket200 v2 4 in 1 ESC BLHeli32 55A
4x Short Grommets &amp 4x Long Grommets
5x Steel Screw 25mm
13x Nylon Nuts
1x Cricket200 FC to Cricket200 ESC cable 30mm
1x Cricket200 FC to Cricket200 ESC cable 50mm
1x Cricket200 FC to Cricket200 ESC cable 85mm
470uf 35v Electrolytic capacitor


NewBeeDrone Cricket200 V2 ESC The Cricket200 V2 ESC are now fully covered by aluminum shield. Base on the first generation Cricket200 ESC, we also optimize the layout and the Power support for the whole system. The new double sided Heatsink/Aluminum Shield compare to single side Heatsink solution can provide better pro

NewBeeDrone Cricket200 V2 ESC

The NewBeeDrone Cricket200 V2 is a 55A 3-6S BLHeli_32 4-in-1 20x20 ESC, upgraded to include a full aluminum shield for protection. This new configuration brings an optimized layout, improved power support, and a double-sided heatsink and aluminum shield, which improves protection and heat dissipation from the previous single-sided version.
Check out the rest of our 20x20 ESCs, and the rest of our NewBeeDrone products.
Features


Upgraded version of the first-generation Cricket200 ESC 
Double-sided heatsink for improved heat dissipation
Optimized layout and power support
Enhanced durability and reliability
Full aluminum shield coverage
Heatsink design

8 Layer PCB with 2Oz Copper

Signal plug JST1.0 8pin plug with NBD Cricket200FC 



Specifications


Weight: 13.0g 
Deminsions: 39x29.5x8mm
ESC Programming: BLHeli32
Mounting Holes: 20x20mm
LiPo Power Input: 3-6S
Burst Current: 65Ax4
Cont.Current: 55Ax4

Includes

1x NewBeeDrone Cricket200 V2 32Bit 55A 3-6S 20x20 4in1 ESC
1x Cricket200 FC to Cricket200 ESC cable 30mm
1x Cricket200 FC to Cricket200 ESC cable 50mm
1x Cricket200 FC to Cricket200 ESC cable 85mm
4x Short Grommets &amp 4x Long Grommets
1x 470uf 35v Electrolytic capacitor
5x Steel Screw 25mm
13x Nylon Nuts




The NewBeeDrone Cricket200 V2 is a 55A 3-6S BLHeli_32 4-in-1 20x20 ESC, upgraded to include a full aluminum shield for protection. This new configuration brings an optimized layout, improved power support, and a double-sided heatsink and aluminum shield, which improves protection and heat dissipation from the previous 

NewBeeDrone Cricket200 V2 32Bit 55A 3-6S 20x20 4in1 ESC from WREKD Co.

NewBeeDrone Cricket200 V2 32Bit 55A 3-6S 20x20 4in1 ESC

NeutronRC

NeutronRC G071 50A 32Bit 2-6S 30x30 4in1 ESC

The NeutronRC G071 BL32 32Bit 50A 2-6S 30x30 4in1 ESC is the perfect solution for drone pilots who need an efficient, reliable, and programmable ESC. This ESC features a 32-bit processor, 50A current limit, 2-6S LiPo compatibility, and 30x30 mounting, making it the ideal choice for your quad.





















Check out all our 30x30 ESCs and our NeutronRC collection!
Features


Main control chip: STM32G071 main control chip, operating frequency up to 64MHz, three-in-one IC drive, imported high-quality high-frequency ceramic capacitors. High-end PCB production process, the pad adopts an electroplating copper process to avoid the pad from falling off during use. 3 oz thick copper, 4+4 double-layer board design, greatly reduces heat, thus improving efficiency.


High-performance 50A ESC: Integrating 4 high-performance 50A ESCs, the integration level is so high, the volume is only about the size of a horizontal wire machine, and the installation and wiring become very simple. This unbelievable size and volume is designed for racing-grade crossovers.


Rich functions: adopt BLHeli_32 firmware (optional AM32 firmware), powerful performance, rich functions, support multiple ways to set ESC parameters, or upgrade ESC firmware (such as through the throttle signal line, use other development boards, or Use cleanflight or Betaflight firmware to setup or upgrade ESCs).


PWM hardware drive motor: PWM hardware drive motor, low noise, smoother throttle response. Damped Light technology and regenerative braking function make the deceleration of the motor more sensitive and effective, and the control is more precise. Active power-renewal technology restores battery power and prolongs sailing time.


Anti-interference and fast response: not only supports ordinary PWM throttle mode, Oneshot125, Oneshot42 and Multshot ultra-high-speed throttle signals, but also supports the latest dshot 150, 300, 600 digital throttle anti-jamming and fast response. The input and output lines are made of soft silicone wire, which is very durable, high-temperature resistant, and easy to weld.

Specifications

Item Type: 4 in 1 50A ESC
Weight: Approx. 15g
Material: electronic components
Color: Black+Blue
ESC size: about 42 x 40 mm
Fixing hole: Approx. 30.5 x 30.5 mm/1.2 x 1.2 inches
Fixed aperture: M3
Working voltage: 2-6S
Maximum continuous working current: 50A
Maximum instantaneous current: 60A
Supports: DSHOT150, 300, 600, PWM, Oneshot125, Oneshot42 and Multshot
Software: BLHeliSuite/AM32
Firmware version: BLHeli32 32.9(96K)
Application: Suitable for unmanned remote control drones and FPV vehicles, etc.

Includes

1x NeutronRC G071 BL32 32Bit 50A 2-6S 30x30 4in1 ESC


Wiring Diagram 
 

The NeutronRC G071 BL32 32Bit 50A 2-6S 30x30 4in1 ESC is the perfect solution for drone pilots who need an efficient, reliable, and programmable ESC. This ESC features a 32-bit processor, 50A current limit, 2-6S LiPo compatibility, and 30x30 mounting, making it the ideal choice for your quad. Check out all our 30x30 ES

NeutronRC G071 BL32 32Bit 50A 2-6S 30x30 4in1 ESC from WREKD Co.

NeutronRC G071 BL32 32Bit 50A 2-6S 30x30 4in1 ESC

NEUTRONRC

HolyBro

Holybro Tekko32 F4 Metal 32Bit 65A 30x30 4in1 ESC

HOLYBRO

Holybro's Tekko32 series is a staple ESC in the drone world, and now they have a brand new model. This version boasts up to 65A of current, and a new F4 processor to make it run smoother.
Check out the rest of our 30x30 ESCs, as well as the rest of our Holybro offerings!
Specifications

Input Voltage: 4-6s Lipo
Continuous Current: 65A
Burst Current: 70A 10S
BEC: No
Software: DShot300/600/1200
Telemetry: Yes
Mounting: 30x30mm
Dimensions: 46x44mm
Weight: 15.8gHolybro

Includes

1x Holybro Tekko32 F4 Metal 32Bit 65A 30x30 4in1 ESC
2x 8pin Cables
4x Soft Mount Grommets


Holybro's Tekko32 series is a staple ESC in the drone world, and now they have a brand new model. This version boasts up to 65A of current, and a new F4 processor to make it run smoother.

Holybro Tekko32 F4 Metal 32Bit 65A 30x30 4in1 ESC - For Sale At RaceDayQuads

Holybro's Tekko32 series is a staple ESC in the drone world, and now they have a brand new model. This version boasts up to 65A of current, and a new F4 processor to make it run smoother. Check out all our 30x30 4in1 Electronic Speed Controllers and the rest of our Holybro Collection! Specifications Input Voltage: 4-6s

Holybro Tekko32 F4 Metal 32Bit 65A 4in1 ESC - 30x30mm

Holybro

The all-new Tekko32 Metal is the first 4-in1- ESC in the market to adapt to the fast F4 MCU. Powerful &amp reliable metal-cased MOSFET 4-in-1 ESC with smooth control and quick response.

The all-new Tekko32 Metal is the first 4-in1- ESC in the market to adapt to the fast F4 MCU. Powerful & reliable metal-cased MOSFET 4-in-1 ESC with smooth control and quick response.

Holybro Tekko32 F4 Metal 65A 4-in-1 ESC

Holybro's Tekko32 series is a staple ESC in the drone world, and now they have a brand new model. This version boasts up to 65A of current, and a new F4 processor to make it run smoother. Check out the rest of our 30x30 ESCs, as well as the rest of our Holybro offerings! Specifications Input Voltage: 4-6s Lipo Continuo

Holybro Tekko32 F4 Metal 32Bit 65A 30x30 4in1 ESC from WREKD Co.

HGLRC

HGLRC SPECTER G071 60A 128K 32Bit 3-6S 20x20 4in1 ESC













HGLRC SPECTER 128K 32Bit 60A 3-6S 20x20 4in1 ESC comes with an advanced STM32G071 BL32 processor for fast computing, a smoother control experience, and superior responsiveness. It features an ESC with BL32 firmware and a PWM frequency of 128K. Plus, you'll appreciate its immersion gold pads for reliable connections, 6-layer board design to sustain higher temperatures, and integrated CNC heat sink to maximize performance. With a built-in ammeter and support for DShot600/300/150 and Oneshot125/24/MultiShot, this ESC delivers. Plus, its nano-scale coating helps protect against water, moisture, and corrosion.
Interested in the HGLRC F760 Mini F722 3-6S 20x20 Stack/Combo (F7 FC / G071 32Bit 60A 4in1 ESC) - MPU6000? 
Interested in just the HGLRC SPECTER F722 Mini 2-6S 20x20 Flight Controller - MPU6000?












Check out the rest of our 20x20 ESCs, and all our HGLRC products

Specifications
 HGLRC SPECTER 60A 3-6S ESC

Input voltage: 3-6S
Continuous Current: 60A
Burst Current: 65A (10 Seconds)
MCU: STM32G071
Firmware: BL32 ( SPECTER60_G_128)
Size: 44mmx36mmx7mm
Mounting: 20x20, M3
Support protocols: Dshot600/300/150/Oneshot125/42, MultiShot
Weight: 19.5g

Includes

1x HGLRC SPECTER 128K 32Bit 60A 3-6S 20x20 4in1 ESC
1x 30AWG 25mm double-ended SH1.0-8P cable

1x 12AWG 100 power cord (black/red)

1x XT60H-M black male connector

1x 50v 470UF solid capacitor


HGLRC SPECTER 128K 32Bit 60A 3-6S 20x20 4in1 ESC comes with an advanced STM32G071 BL32 processor for fast computing, a smoother control experience, and superior responsiveness. It features an ESC with BL32 firmware and a PWM frequency of 128K. Plus, you'll appreciate its immersion gold pads for reliable connections, 6-

HGLRC SPECTER G071 128K 32Bit 60A 3-6S 20x20 4in1 ESC

HGLRC SPECTER G071 128K 32Bit 60A 3-6S 20x20 4in1 ESC from WREKD Co.

HAKRC

HAKRC HK3220 60A 32Bit 2-8S 20x20 4in1 ESC

The HAKRC HK3220 2-8S BLHELI_32 60A 4in1 20x20 ESC is an advanced ESC featuring a AT32F421 main control chip with operating frequency of up to 128MHz, Japan imported MOS and 3-in-1 IC driver FD6288Q driver, imported Murata capacitors, 8-layer 2-ounce copper PCB, hardware PWM drives, Damped Light technology and Active Freewheeling technology for smoother throttle response, regenerative braking and power recycling.
Check out the rest of our 20x20 ESCs, as well as HAKRC products for sale at WREKD!
Features

PCB adopts high-end 8-layer 2oZ thickened copper skin, which has stronger overcurrent capability and good heat dissipation.

MOS adopts imported high current resistance MOS, long life with strong load capacity.

Adopt industrial grade LDO, high temperature resistance.

Using 40 50V high-quality Japanese Murata capacitors, strong filtering performance

PWM frequency up to 128k, high frequency for higher throttleRuns smoother.

Specifications


ESC firmware: HAKRC_AT4G_Multi_32.9 Hex


Protocol support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600


Input voltage: 2S-8S Lipo


Continuous current: 60A

Peak current: 70A
Size: 34 x 42mm (20mm-20mm mounting hole)
Product net weight: 11g

Includes

1x HAKRC HK3220 BLHELI_32Bit 60A 2-8S 20x20 4in1 ESC
1x XT60 Connector
1x 12AWG 6cm Power Cable
1x 35V 470uF Capacitor
1x 8Pin JST ESC to FC cable 

4x M3 Grommets.

4x M2 Grommets


The HAKRC HK3220 2-8S BLHELI_32 60A 4in1 20x20 ESC is an advanced ESC featuring a AT32F421 main control chip with operating frequency of up to 128MHz, Japan imported MOS and 3-in-1 IC driver FD6288Q driver, imported Murata capacitors, 8-layer 2-ounce copper PCB, hardware PWM drives, Damped Light technology and Active F

HAKRC HK3220 32Bit 60A 2-8S 20x20 4in1 ESC from WREKD Co.

HAKRC HK3220 32Bit 60A 2-8S 20x20 4in1 ESC

The HAKRC HK3220 2-8S BLHELI_32 60A 4in1 20x20 ESC is an advanced ESC featuring a AT32F421 main control chip with operating frequency of up to 128MHz, Japan imported MOS and 3-in-1 IC driver FD6288Q driver, imported Murata capacitors, 8-layer 2-ounce copper PCB, hardware PWM drives, Damped Light technology and Active Freewheeling technology for smoother throttle response, regenerative braking and power recycling.
Check out the rest of our 20x20 ESCs, as well as HAKRC products for sale at RaceDayQuads!
Features

PCB adopts high-end 8-layer 2oZ thickened copper skin, which has stronger overcurrent capability and good heat dissipation.

MOS adopts imported high current resistance MOS, long life with strong load capacity.

Adopt industrial grade LDO, high temperature resistance.

Using 40 50V high-quality Japanese Murata capacitors, strong filtering performance

PWM frequency up to 128k, high frequency for higher throttleRuns smoother.

Specifications


ESC firmware: HAKRC_AT4G_Multi_32.9 Hex


Protocol support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600


Input voltage: 2S-8S Lipo


Continuous current: 60A

Peak current: 70A
Size: 34 x 42mm (20mm-20mm mounting hole)
Product net weight: 11g

Includes

1x HAKRC HK3220 BLHELI_32Bit 60A 2-8S 20x20 4in1 ESC
1x XT60 Connector
1x 12AWG 6cm Power Cable
1x 35V 470uF Capacitor
1x 8Pin JST ESC to FC cable 

4x M3 Grommets.

4x M2 Grommets


The HAKRC HK3220 2-8S BLHELI_32 60A 4in1 20x20 ESC is an advanced ESC featuring a AT32F421 main control chip with operating frequency of up to 128MHz, Japan imported MOS and 3-in-1 IC driver FD6288Q driver, imported Murata capacitors, 8-layer 2-ounce copper PCB, hardware PWM drives, Damped Light technology and Active Freewheeling technology for smoother throttle response, regenerative braking and power recycling.
Features

PCB adopts high-end 8-layer 2oZ thickened copper skin, which has stronger overcurrent capability and good heat dissipation.
MOS adopts imported high current resistance MOS, long life with strong load capacity.
Adopt industrial grade LDO, high temperature resistance.
Using 40 50V high-quality Japanese Murata capacitors, strong filtering performance
PWM frequency up to 128k, high frequency for higher throttleRuns smoother.

Specifications

ESC firmware: HAKRC_AT4G_Multi_32.9 Hex
Protocol support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Input voltage: 2S-8S Lipo
Continuous current: 60A
Peak current: 70A
Size: 34 x 42mm (20mm-20mm mounting hole)
Product net weight: 11g

Includes

1x HAKRC HK3220 BLHELI_32Bit 60A 2-8S 20x20 4in1 ESC
1x XT60 Connector
1x 12AWG 6cm Power Cable
1x 35V 470uF Capacitor
1x 8Pin JST ESC to FC cable
4x M3 Grommets.
4x M2 Grommets


Foxeer

Foxeer Reaper 65A 128K 32Bit 3-8S 30x30 4in1 ESC

WREKD is a family-owned & operated, leading online FPV super-store based in the United States specializing in FPV racing / freestyle / tiny / micro whoop drones, parts, gear, and accessories. We offer fast, domestic, same-day shipping with the quickest delivery to anywhere in the U.S.A.

Foxeer Reaper F4 128K 32Bit 65A 3-8S 4in1 ESC - 30x30mm from WREKD Co.

Foxeer Reaper F4 128K 32Bit 65A 3-8S 4in1 ESC - 30x30mm

The Foxeer Reaper F4 128K is the next evolution of the Reaper ESC series. With its low heat generation and high-quality mosfets, this new version has a smoother flight, with fewer desyncs.
Check out the rest of our 30x30 ESCs, as well as the rest of our Foxeer offerings!
Specifications


Input Voltage: 3-8S LiPo


Max. Continuous Current: 65A


Max Burst Current: 100A 

Telemetry: Yes

Firmware: BLHeli_32

Target: FOXEER_Reaper4IN1_F4_65A_128_Multi_32_9
Input Signal: DShot 150/300/600/1200/MultiShot/OneShot 

BEC: No


Mounting Pattern: 30x30mm M3

Dimensions: 42.5x42.5mm

Weight: 14.8g


Includes

1x Foxeer Reaper F4 128K 32Bit 65A 3-8S 30x30 4in1 ESC

Wiring Diagram


The Foxeer Reaper F4 128K is the next evolution of the Reaper ESC series. With its low heat generation and high-quality mosfets, this new version has a smoother flight, with fewer desyncs. Check out the rest of our 30x30 ESCs, as well as the rest of our Foxeer offerings! Specifications Input Voltage: 3-8S LiPo Max. Con

Foxeer Reaper F4 128K 32Bit 65A 3-8S 30x30 4in1 ESC from WREKD Co.

Foxeer Reaper F4 128K 32Bit 65A 3-8S 30x30 4in1 ESC

The Foxeer Reaper 128K is the next evolution of the Reaper ESC series. With its low heat generation and high-quality mosfets, this new version has a smoother flight, with fewer desyncs. This is a replacement ESC for The Moxy Pro-Spec Built &amp TunedPairs best with the Foxeer F722 V2 Flight controller
Specifications


Input Voltage: 3-8S LiPo


Max. Continuous Current: 65A


Max Burst Current: 100A 


Firmware: BLheli_32

Target: FOXEER_Reaper4IN1_65A_128_Multi_32_8
Input Signal: DShot 150/300/600/1200/MultiShot/OneShot 

BEC: No


Mounting Dimensions: 30x30mm M3

Dimensions: 42.5x42.5mm

Weight: 14.8g


Includes

1x Foxeer Reaper 128K 32Bit 65A 3-8S 30x30 4in1 ESC
1x AMASS XT60H Pigtail
1x 560uf 35V Capacitor



The Foxeer Reaper 128K is the next evolution of the Reaper ESC series. With its low heat generation and high-quality mosfets, this new version has a smoother flight, with fewer desyncs. This is a replacement ESC for The Moxy Pro-Spec Built &amp; TunedPairs best with the Foxeer F722 V2 Flight controller Specifications I

Foxeer Reaper 128K 32Bit 65A 3-8S 30x30 4in1 ESC

The Foxeer Reaper 128K is the next evolution of the Reaper ESC series. With its low heat generation and high-quality mosfets, this new version has a smoother flight, with fewer desyncs. This is a replacement ESC for The Moxy Pro-Spec Built &amp; TunedPairs best with the Foxeer F722 V2 Flight controller
Specifications


Input Voltage: 3-8S LiPo


Max. Continuous Current: 65A


Max Burst Current: 100A 


Firmware: BLheli_32

Target: FOXEER_Reaper4IN1_65A_128_Multi_32_8
Input Signal: DShot 150/300/600/1200/MultiShot/OneShot 

BEC: No


Mounting Dimensions: 30x30mm M3

Dimensions: 42.5x42.5mm

Weight: 14.8g


Includes

1x Foxeer Reaper 128K 32Bit 65A 3-8S 30x30 4in1 ESC
1x AMASS XT60H Pigtail
1x 560uf 35V Capacitor

