FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Continuous Amp Rating

Diatone

Diatone Mamba F40 Mini 40A 128k 32Bit 2-6S 20x20 4in1 ESC

The&nbspDiatone Mamba Mini F40 40A ESC&nbspbrings BIG power all in a 20x20 mounting size! This ESC can push 40A all while bringing you the latest features! This is the&nbsp128K&nbspversion.

The Diatone Mamba Mini F40 40A ESC brings BIG power all in a 20x20 mounting size! This ESC can push 40A all while bringing you the latest features! This is the 128K version.

Diatone Mamba Mini 128K 6S BLHeli_32 4-in-1 ESC - F40 40A

128K is the next big thing in speed controllers and this is Diatone's answer to the new Hype! Check out all our 20x20 4in1 ESCs and our wide collection of Diatone products! Specifications: INPUT VOLTAGE: 2~6S Lipo (8.4V~25.2V) CONTINUE CURRENT:40A×4 BURST CURRENT:45A (10S) BEC: No Target：BLHeli_32 MAMBA F40_128K_MINI S

Diatone MAMBA F40_128K BL32 MINI 4IN1 ESC 40A 6S - 20x20mm

Elevate your drone&#39s performance with the Diatone Mamba F40 Mini 128k 32Bit 40A 2-6S 20x20 4in1 ESC, a pinnacle of ESC technology designed to revolutionize your flying experience.Specifications:Input Voltage: 2~6SMax Continuous Current: 40AMax Burst Current: 45ABEC: NoTarget: BLHeli_32 MAMBA F40_128K_MINIProtocol: Dshot300/600/1200PWM Range: 24~128KTVS Protection: YesMounting Pattern: 20x20 M2/M3Included:Diatone Mamba F40 Mini 128k 32Bit 40A 2-6S 4in1 ESC2x 8pin sh1.0 connectors1x AMASS XT60 connector1x High-Frequency 470uF/35V CapacitorExperience a new level of control and precision with this ESC, featuring an input voltage range of 2 to 6S, ensuring compatibility across various setups. Delivering a continuous current of 40A and a burst current of 45A, it guarantees reliability and power for high-performance flights.Harness the power of the BLHeli_32 MAMBA F40_128K_MINI target and Dshot300/600/1200 protocols for seamless integration and excep...

The best quality First Person View equipment. Free or discounted shipping on all orders.Drone Racing, RC Airplanes, FPV Cameras, FPV Goggles, Video Transmitters, RC Quads, Drone Antennas, Lipo Batteries, and Ground Station Equipment.All available for amateurs, schools, hobbyists, government, and wholesale buyers.

Diatone Mamba F40 Mini 128k 32bit 40a 2-6s 20x20 4in1 ESC - www.readymaderc.com

Diatone Mamba F40 Mini 128k 32bit 40A 2-6S 20x20 4in1 ESC

DIATONE

Diatone takes a shot at the new trend of ultra smooth 128k ESCs. Diatone's consistent quality and performance make this a great option for those looking to experiment with a 128k ESC build.
Check out the rest of our 4in1 ESCs and Diatone gear!
Specifications

Input Voltage: 2~6S
Max Continuous Current: 40A
Max Burst Current: 45A 
BEC: No

Target：BLHeli_32 MAMBA F40_128K_MINI

Protocol: Dshot300/600/1200

PWM Range: 24~128K

TVS Protection: Yes
Mounting Pattern: 20x20 M2/M3

Includes

Diatone Mamba F40 Mini 128k 32Bit 40A 2-6S 4in1 ESC
2x 8pin sh1.0
1x AMASS XT60
1x High-Frequency 470uF/35V Capacitor


Diatone takes a shot at the new trend of ultra smooth 128k ESCs. Diatone's consistent quality and performance make this a great option for those looking to experiment with a 128k ESC build. Check out the rest of our 4in1 ESCs and Diatone gear! Specifications Input Voltage: 2~6S Max Continuous Current: 40A Max Burst Cur

Diatone Mamba F40 Mini 128k 32Bit 40A 2-6S 20x20 4in1 ESC

DiatoneUSA

Diatone Mamba F40 Mini 128k 32Bit 40A 2-6S 20x20 4in1 ESC from WREKD Co.

Single / 4-in-1 ESC

The ESC(s) controls your motors’ speed. It draws power from the battery to spin the motors based on what the FC tells it to do. Each motor needs an ESC. It’s common today to see 4-in-1 ESCs so you only need to buy a single part. For beginners, choose a 4-in-1 ESC that has a compatible mount with your frame and FC. The biggest consideration is amperage limit. We show you ESCs with appropriate amperage limits based on your frame size. You can calculate how much amperage you need based on your motor and prop choice. 

ESCs

ESC Stack Mount

Firmware

Minimum Voltage

Maximum Voltage

SpeedyBee

Speedybee Mini BLS V2 35A 8Bit 3-6S 20x20 4in1 ESC

The SpeedyBee Mini V2 35A BLHeli_S 4-in-1 ESC - 20x20 is a testament to advanced engineering and thoughtful design, offering pilots a robust and powerful electronic speed controller for their FPV drones.

SpeedyBee Mini V2 35A BLHeli_S 4-in-1 ESC - 20x20 

RUNCAM


This ESC provides four synchronized outputs with a continuous current of 35A, delivering strong power to drive all 2-4 inch and lightweight 5-inch quadcopters. Equipped with a TVS transient suppression diode onboard, it better absorbs surge voltage, providing enhanced protection for the ESC. All on a 20x20 platform with a value you can't beat! 




Check out all our 20x20 ESCs as well as the rest of our SpeedyBee products! 
Specifications

Firmware: BLHeli_S J-H-40

Continuous Current: 35A x 4

Burst Current: 45A(5seconds)

ESC Protocol: DSHOT300/600

Power Input: 3-6S LiPo

Power Output: VBAT(Battery voltage, used to power the flight controller)

Current Sensor: Support (Scale=250 Offset=-500)

Mounting: 20 x 20mm ∅3.5mm hole size, compatible with M2 and M3
screws/Silicone grommets.

Dimension: 35 x 35 x 5.5mm

Weight: 7.2g

Includes

1x Speedybee Mini BLS V2 8Bit 35A 3-6S 20x20 4in1 ESC

Wiring Diagram


This ESC provides four synchronized outputs with a continuous current of 35A, delivering strong power to drive all 2-4 inch and lightweight 5-inch quadcopters. Equipped with a TVS transient suppression diode onboard, it better absorbs surge voltage, providing enhanced protection for the ESC. All on a 20x20 platform wit

Speedybee Mini BLS V2 8Bit 35A 3-6S 20x20 4in1 ESC

Speedybee Mini BLS V2 8Bit 35A 3-6S 20x20 4in1 ESC from WREKD Co.

T-Motor

T-Motor Mini F45A 32Bit 45A 3-6S 20x20 4in1 ESC

T-Motor fits a powerful ESC into a tiny little package. Also available in Solder-Free!
Specifications

Input Voltage: 3-6S
ESC Firmware: BLHeli32
Telemetry: Supported
Galvanometer: Supported
DSHOT 150/DSHOT 300/DSHOT 600/PROSHOT 1000
Backward Compatible with Oneshot125/Oneshot42/Multishot
Betaflight Galvanometer Ratio: 200
Mounting Pitch: 20*20mm
Weight: 9.2g

Includes

1x F45 32Bit 45A 3-6S 20x20 4in1 ESC 

Wiring Diagram


Solder Free: Everything is 100% plug-n-play, the MR30 Quick Connection System makes assembly a breeze and removes the need for any soldering! T-Motor fits a powerful ESC into a tiny little package. With the upgrade of solder-free, you can get your ESC changed in a heartbeat or swap motors without opening up the frame. If you want to spend less time on repairs and more time on flying, this is the ESC for you!

F45 32Bit 45A 3-6S 20x20 4in1 ESC

The T-Motor Mini F45A 6S BLHeli32 4-in-1 ESC has a 45A persistent current and 55A peak! The Mini F45A 4-in-1 ESC comes with reliable high quality mosfet and high-performance 32-BIT main controller it also supports mainstream throttle signals like DSHOT150/DSHOT300, DSHOT600, PROSHOT1000 and is also compatible with Ones

T-Motor Mini F45A 6S 4-in-1 ESC (BLHeli32) - 20x20mm

Tiger Motors

The T-Motor Mini F45A 6S is a 4-in-1 ESC that comes with a 20x20 mounting pattern and 32-BIT for high performance and fast response! 

T-Motor Mini F45A 3-6S 32-Bit 20x20 4-in-1 ESC

T-Motor Hobby

The T-Motor Mini F45A 6S BLHeli32 4-in-1 ESC is loaded with lots of power! The Mini F45A 4-in-1 ESC comes with a high-performance 32-BIT main control and supports mainstream throttle signals like DSHOT150/DSHOT300, DSHOT600, and PROSHOT1000. Compatible with Oneshot125, Oneshot42, Multishot, and common PWN signals. 
Pair this ESC with the T-Motor Mini F7 for the ultimate combination of FC and ESC. 
Check out all our 20x20 FCs and all our T-Motor products!
Specification

Brand: T-Motor
Item Name: MINI F45A 4IN1 ESC
Input Voltage: 3-6S
ESC Firmware: BLHeli32
Telemetry: Support
Mounting pitch: 20x20mm
Weight: 9.2g
Betaflight galvanometer ratio: 200


Includes

1x T-Motor Mini F45A 6S BLHeli32 4-in-1 ESC


The T-Motor Mini F45A 6S BLHeli32 4-in-1 ESC is loaded with lots of power! The Mini F45A 4-in-1 ESC comes with a high-performance 32-BIT main control and supports mainstream throttle signals like DSHOT150/DSHOT300, DSHOT600, and PROSHOT1000. Compatible with Oneshot125, Oneshot42, Multishot, and common PWN signals.  Pai

T-Motor Mini F45A 6S 32Bit 4in1 ESC from WREKD Co.

T-Motor Mini F45A 6S 32Bit 4in1 ESC

The T-Motor Mini F45A 6S BLHeli32 4-in-1 ESC is loaded with lots of power, all in a 20x20 ESC!

T-Motor Mini F45A 6S BLHeli32 4-in-1 ESC

Behold, the legendary mystical scroll that reveals the power of the T-Motor Mini F45A 6S BLHeli32 4-in-1 ESC!
This sacred artifact is imbued with immense power, thanks to its high-performance 32-BIT main control. It supports mainstream throttle signals like DSHOT150/DSHOT300, DSHOT600, and PROSHOT1000, and is compatible with Oneshot125, Oneshot42, Multishot, and common PWN signals.
For the ultimate combination of FC and ESC, pair the Mini F45A with the T-Motor Mini F7 and unlock a new level of flying.
But the power doesn't end there. Check out all our 20x20 FCs and all our T-Motor products and discover the full extent of your aerial potential.
Specifications:

Brand: T-Motor
Item Name: MINI F45A 4IN1 ESC
Input Voltage: 3-6S
ESC Firmware: BLHeli32
Telemetry: Support
Mounting pitch: 20x20mm
Weight: 9.2g
Betaflight galvanometer ratio: 200
EAN: 6971360351528


Includes:

1x T-Motor Mini F45A 6S BLHeli32 4-in-1 ESC


Unleash the power of the T-Motor Mini F45A 6S 4in1 ESC. High-performance 32-BIT control, compatibility with popular throttle signals. Explore now!

TMOTOR

Five33

The T-Motor Mini F45A 6S BLHeli32 4-in-1 ESC is loaded with lots of power! The Mini F45A 4-in-1 ESC comes with the high-performance 32-BIT main control and supports mainstream throttle signals like DSHOT150/DSHOT300, DSHOT600, PROSHOT1000. Compatible with Oneshot125, Oneshot42, Multishot, and common PWN signals. 















NewBeeDrone

NewBeeDrone Cricket200 V2 55A 3-6S 4in1 ESC

NewBeeDrone Cricket200 V2 ESC
The Cricket200 V2 ESC are now fully covered by aluminum shield. Base on the first generation Cricket200 ESC, we also optimize the layout and the Power support for the whole system. The new double sided Heatsink/Aluminum Shield compare to single side Heatsink solution can provide better protection and heat dissipation. 
 

 

Cricket 200 ESC Spec:

LiPo Power input: 3S-6S
ESC Programming: BLHeli32
Cont.Current: 55Ax4
Burst Current: 65Ax4
Weight / Size: 13.0g / 39x29.5x8mm
Mounting holes: 20x20mm

Signal plug JST1.0 8pin plug with NBD Cricket200FC

Solder pad ready for signal and power
Heatsink design
8 Layer PCB with 2Oz Copper
Smoov performance design by Team NBD

Includes:

1x Cricket200 v2 4 in 1 ESC BLHeli32 55A
4x Short Grommets &amp 4x Long Grommets
5x Steel Screw 25mm
13x Nylon Nuts
1x Cricket200 FC to Cricket200 ESC cable 30mm
1x Cricket200 FC to Cricket200 ESC cable 50mm
1x Cricket200 FC to Cricket200 ESC cable 85mm
470uf 35v Electrolytic capacitor


NewBeeDrone Cricket200 V2 ESC The Cricket200 V2 ESC are now fully covered by aluminum shield. Base on the first generation Cricket200 ESC, we also optimize the layout and the Power support for the whole system. The new double sided Heatsink/Aluminum Shield compare to single side Heatsink solution can provide better pro

NewBeeDrone Cricket200 V2 ESC

The NewBeeDrone Cricket200 V2 is a 55A 3-6S BLHeli_32 4-in-1 20x20 ESC, upgraded to include a full aluminum shield for protection. This new configuration brings an optimized layout, improved power support, and a double-sided heatsink and aluminum shield, which improves protection and heat dissipation from the previous single-sided version.
Check out the rest of our 20x20 ESCs, and the rest of our NewBeeDrone products.
Features


Upgraded version of the first-generation Cricket200 ESC 
Double-sided heatsink for improved heat dissipation
Optimized layout and power support
Enhanced durability and reliability
Full aluminum shield coverage
Heatsink design

8 Layer PCB with 2Oz Copper

Signal plug JST1.0 8pin plug with NBD Cricket200FC 



Specifications


Weight: 13.0g 
Deminsions: 39x29.5x8mm
ESC Programming: BLHeli32
Mounting Holes: 20x20mm
LiPo Power Input: 3-6S
Burst Current: 65Ax4
Cont.Current: 55Ax4

Includes

1x NewBeeDrone Cricket200 V2 32Bit 55A 3-6S 20x20 4in1 ESC
1x Cricket200 FC to Cricket200 ESC cable 30mm
1x Cricket200 FC to Cricket200 ESC cable 50mm
1x Cricket200 FC to Cricket200 ESC cable 85mm
4x Short Grommets &amp 4x Long Grommets
1x 470uf 35v Electrolytic capacitor
5x Steel Screw 25mm
13x Nylon Nuts




The NewBeeDrone Cricket200 V2 is a 55A 3-6S BLHeli_32 4-in-1 20x20 ESC, upgraded to include a full aluminum shield for protection. This new configuration brings an optimized layout, improved power support, and a double-sided heatsink and aluminum shield, which improves protection and heat dissipation from the previous 

NewBeeDrone Cricket200 V2 32Bit 55A 3-6S 20x20 4in1 ESC from WREKD Co.

NewBeeDrone Cricket200 V2 32Bit 55A 3-6S 20x20 4in1 ESC

HAKRC

HAKRC HK3220 60A 32Bit 2-8S 20x20 4in1 ESC

The HAKRC HK3220 2-8S BLHELI_32 60A 4in1 20x20 ESC is an advanced ESC featuring a AT32F421 main control chip with operating frequency of up to 128MHz, Japan imported MOS and 3-in-1 IC driver FD6288Q driver, imported Murata capacitors, 8-layer 2-ounce copper PCB, hardware PWM drives, Damped Light technology and Active Freewheeling technology for smoother throttle response, regenerative braking and power recycling.
Check out the rest of our 20x20 ESCs, as well as HAKRC products for sale at WREKD!
Features

PCB adopts high-end 8-layer 2oZ thickened copper skin, which has stronger overcurrent capability and good heat dissipation.

MOS adopts imported high current resistance MOS, long life with strong load capacity.

Adopt industrial grade LDO, high temperature resistance.

Using 40 50V high-quality Japanese Murata capacitors, strong filtering performance

PWM frequency up to 128k, high frequency for higher throttleRuns smoother.

Specifications


ESC firmware: HAKRC_AT4G_Multi_32.9 Hex


Protocol support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600


Input voltage: 2S-8S Lipo


Continuous current: 60A

Peak current: 70A
Size: 34 x 42mm (20mm-20mm mounting hole)
Product net weight: 11g

Includes

1x HAKRC HK3220 BLHELI_32Bit 60A 2-8S 20x20 4in1 ESC
1x XT60 Connector
1x 12AWG 6cm Power Cable
1x 35V 470uF Capacitor
1x 8Pin JST ESC to FC cable 

4x M3 Grommets.

4x M2 Grommets


The HAKRC HK3220 2-8S BLHELI_32 60A 4in1 20x20 ESC is an advanced ESC featuring a AT32F421 main control chip with operating frequency of up to 128MHz, Japan imported MOS and 3-in-1 IC driver FD6288Q driver, imported Murata capacitors, 8-layer 2-ounce copper PCB, hardware PWM drives, Damped Light technology and Active F

HAKRC HK3220 32Bit 60A 2-8S 20x20 4in1 ESC from WREKD Co.

HAKRC HK3220 32Bit 60A 2-8S 20x20 4in1 ESC

The HAKRC HK3220 2-8S BLHELI_32 60A 4in1 20x20 ESC is an advanced ESC featuring a AT32F421 main control chip with operating frequency of up to 128MHz, Japan imported MOS and 3-in-1 IC driver FD6288Q driver, imported Murata capacitors, 8-layer 2-ounce copper PCB, hardware PWM drives, Damped Light technology and Active Freewheeling technology for smoother throttle response, regenerative braking and power recycling.
Check out the rest of our 20x20 ESCs, as well as HAKRC products for sale at RaceDayQuads!
Features

PCB adopts high-end 8-layer 2oZ thickened copper skin, which has stronger overcurrent capability and good heat dissipation.

MOS adopts imported high current resistance MOS, long life with strong load capacity.

Adopt industrial grade LDO, high temperature resistance.

Using 40 50V high-quality Japanese Murata capacitors, strong filtering performance

PWM frequency up to 128k, high frequency for higher throttleRuns smoother.

Specifications


ESC firmware: HAKRC_AT4G_Multi_32.9 Hex


Protocol support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600


Input voltage: 2S-8S Lipo


Continuous current: 60A

Peak current: 70A
Size: 34 x 42mm (20mm-20mm mounting hole)
Product net weight: 11g

Includes

1x HAKRC HK3220 BLHELI_32Bit 60A 2-8S 20x20 4in1 ESC
1x XT60 Connector
1x 12AWG 6cm Power Cable
1x 35V 470uF Capacitor
1x 8Pin JST ESC to FC cable 

4x M3 Grommets.

4x M2 Grommets


The HAKRC HK3220 2-8S BLHELI_32 60A 4in1 20x20 ESC is an advanced ESC featuring a AT32F421 main control chip with operating frequency of up to 128MHz, Japan imported MOS and 3-in-1 IC driver FD6288Q driver, imported Murata capacitors, 8-layer 2-ounce copper PCB, hardware PWM drives, Damped Light technology and Active Freewheeling technology for smoother throttle response, regenerative braking and power recycling.
Features

PCB adopts high-end 8-layer 2oZ thickened copper skin, which has stronger overcurrent capability and good heat dissipation.
MOS adopts imported high current resistance MOS, long life with strong load capacity.
Adopt industrial grade LDO, high temperature resistance.
Using 40 50V high-quality Japanese Murata capacitors, strong filtering performance
PWM frequency up to 128k, high frequency for higher throttleRuns smoother.

Specifications

ESC firmware: HAKRC_AT4G_Multi_32.9 Hex
Protocol support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Input voltage: 2S-8S Lipo
Continuous current: 60A
Peak current: 70A
Size: 34 x 42mm (20mm-20mm mounting hole)
Product net weight: 11g

Includes

1x HAKRC HK3220 BLHELI_32Bit 60A 2-8S 20x20 4in1 ESC
1x XT60 Connector
1x 12AWG 6cm Power Cable
1x 35V 470uF Capacitor
1x 8Pin JST ESC to FC cable
4x M3 Grommets.
4x M2 Grommets


Flycolor

Flycolor Trinx G20 32Bit 60A 3-6S 20x20 4in1 ESC























The Flycolor Trinx G20 32Bit 60A 3-6S 20x20 4in1 ESC packs powerful features into a compact 20x20mm package. It boasts a 32-bit processor, up to 60A of current, and supports 3-6S batteries for a reliable experience for high-end FPV. Achieve more security for your flights with the Trinx G20!











Check out all our 20x20 ESCs and all our Flycolor Products!











FEATURES

ARM 32-bit Cortex MCU STM32G0, frequency up to 64 MHz.
PWM frequency up to 128K, high frequency for higher throttle makes
running smoother.
Compared with the previous generation of ESC, the ESC firmware is
optimized, making the throttle linearity smoother and the response faster.
Miniaturized and lightweight design, better routing, and component layout.
20x20 mounting holes to meet the installation requirements of diversified
frames.
Built-in current sensor and VBAT output.
Supports regular 1-2ms pulse width input, as well as Oneshot125
(125-250us), Oneshot42 (41.7-83.3us) and Multshot (5- 25us). The input
signal is automatically detected by the ESC upon power-up.
All Dshot and Proshot signals are supported.
Damped light does regenerative braking, causing very fast motor
retardation, and inherently also does active freewheeling.
Supports higher power load, more suitable for violent flight of racing drones.
Conformal coating for extra protection

Large soldering tabs

Low ESR capacitor and XT60 cable included

Specification

Model: Flycolor TRINX G20
Con. Current: 60A
Burst Current: 70A (10s)
BEC: No BEC
LiPo cells: 3-6S
Weight: 14.4g
Size: 44x36x6.3mm
Mounting: 20x20mm,M3
Configurator: BLHeliSuite32 
Firmware: Flycolor_Raptor_5

Includes

1x Flycolor Trinx G20 32Bit 60A 3-6S 20x20 4in1 ESC
4x Silicone vibration absorber 

5x O-Ring 
1x Power cable+XT60 
1x FC/ESC connecting wire 
1x Low ESR capacitor 
1x Aluminum heat sink 


The Flycolor Trinx G20 32Bit 60A 3-6S 20x20 4in1 ESC packs powerful features into a compact 20x20mm package. It boasts a 32-bit processor, up to 60A of current, and supports 3-6S batteries for a reliable experience for high-end FPV. Achieve more security for your flights with the Trinx G20! Check out all our 20x20 ESCs

FlyColor

Enhance your drone's performance with the Flycolor Trinx G20 60A 4-in-1 BLHeli_32 ESC.&nbsp

Enhance your drone's performance with the Flycolor Trinx G20 60A 4-in-1 BLHeli_32 ESC. 

Flycolor Trinx G20 60A 4-in-1 BLHeli_32 ESC - 20x20

Flycolor Trinx G20 32Bit 60A 3-6S 20x20 4in1 ESC from WREKD Co.

FETtec

FETtec 35A 20x20 4in1 ESC V1.1

FETTEC

The FETtec 35 amp 4in1 ESCs is a great board on its own, now the magic comes from KISS FC Passthrough and other KISS Features. For example Dshot2400, 128kHz motor PWM, Dshot 300-2400, and 128kHz motor PWM. As being version 1.1 they fixed issues like not having to install a capacitor close to the mounting holes.  You will see  an increased area around the battery soldering pads for safer use. Also adding a new protection circuit for the signal IOs to the board. One blue LED for each ESC onboard, grab this 20x20 board for those quads that need them!
The perfect compliment to your FETtec Kiss FC! Check out all our KISS compatible gear, and everything FETtec! 
Features

More space around battery pads
One blue LED for each ESC onboard
New protection circuit for the signal IOs

No more capacitors close to the mounting holes


Specifications 

Active current limiting @ 35A
Input voltage: 3S-6S
High quality 40V MOSFETs
STM32G071 @ 64MHz
128 kHz motor PWM
Weight: 6.4g(board only)

Full sine wave control
Solder points for up to 5 additional capacitors
KISS FC Passthrough
Betaflight pass-through (available from 4.1)

Automatic input signal detection:

Dshot 300-2400
PWM
OneShot42 / 125
OneWire BUS with up to 8kHz looptime (one cable for all motor signals and telemetry)


New FETtec Firmware
FETtec Configurator for updated, configuration and telemetry. Standalone for MacOS, Windows 32 &amp 64 bit and Chrome Plugin
Dimensions: 30mm x 35mm
Mounting hole: 20mm x 20mm, M2 breakable for M3




Manual DownloadFETtec Configurator 

Includes 

1x FETtec 35A V1.1 3-6S 20x20 4in1 ESC
1x Capacitor 50V, ESR &lt 1ohm (477CKE050M)
1x JST-SH 8 Pin Cable


The FETtec 35 amp 4in1 ESCs is a great board on its own, now the magic comes from KISS FC Passthrough and other KISS Features. For example Dshot2400, 128kHz motor PWM, Dshot 300-2400, and 128kHz motor PWM. As being version 1.1 they fixed issues like not having to install a capacitor close to the mounting holes.  You wi

FETtec V1.1 35A  3-6S 20x20 4in1 ESC

FETtec V1.1 35A 3-6S 20x20 4in1 ESC

FETtec V1.1 35A  3-6S 20x20 4in1 ESC from WREKD Co.

Diatone Mamba F30 Mini 30A 2-5S 20x20 4in1 ESC

Spare replacement part for Diatone Mamba F405 Mini Stacks.
Check out the rest of our 4in1 ESCs and Diatone gear!
Specifications

Input voltage: 2-5S
Continuous Current :30A
Peak Current: 40A
ESC Firmware: BLHeli_S
Agreement: DShot 300/600
BEC: NO
Size: 29.0×29.0×5.5mm
Mounting: 20x20,M2
Weight: 6g

Includes 

1x Diatone Mamba F30 Mini 30A 20x20 4in1 ESC


Spare replacement part for Diatone Mamba F405 Mini Stacks. Check out the rest of our 4in1 ESCs and Diatone gear! Specifications Input voltage: 2-5S Continuous Current :30A Peak Current: 40A ESC Firmware: BLHeli_S Agreement: DShot 300/600 BEC: NO Size: 29.0×29.0×5.5mm Mounting: 20x20,M2 Weight: 6g Includes  1x Diatone M

Diatone Mamba F30 Mini 30A 2-5S 20x20 8Bit 4in1 ESC from WREKD Co.

Diatone Mamba F30 Mini 30A 2-5S 20x20 8Bit 4in1 ESC

Replacement ESC for Diatone MK2 MINI stack MAMBA F30HV 30A 3-5S 4 in 1 BLHeli_S Dshot600 ESC For RC FPV Racing Drone Upgrade of MAMBA F25 MK2 HV 2-4S 4 IN 1 BLHELI_S 20*20mm Check out all our Stacks and the rest of our Diatone Products! Specification: Mamba F30 ESC Item name: Mamba F25HV ESC  Input voltage: 2~5S (7.4V~

Diatone Mamba F30MINI 2-5S 4IN1 BLHELI_S DSHOT600 Electronic Speed Controller - 20x20mm

Diatone Mamba 5 Reactor 44A 32Bit 4in1 ESC












Experience reliable power with the Diatone Mamba 5 Reactor 32Bit 44A 4-6S 20x20 4in1 ESC. This advanced ESC is designed to provide you with precise and smooth control for your quadcopter. Enjoy a responsive feel and the responsiveness of your craft, thanks to its 32-bit processor. 











Check out all our 20x20 ESCs and all our Diatone Gear!
Specification

Input voltage: 4~6S Lipo (16.8V~25.2V)
Continue Current: 44A×4
Burst current: 54A (10S)
BEC: No
Target： BLHeli_32 MAMBA5_Reactor_44
SOFT: DSHOT300/600/1200/MAX2400（FETTEC）
PWM: 24~128K
Mounting size: 20mm, M2

Includes

1x Diatone Mamba 5 Reactor 32Bit 44A 4-6S 20x20 4in1 ESC
2x 8pin sh1.0 
1x AMASS Original XT60 
1x High Frequency 470uF/35V 


Experience reliable power with the Diatone Mamba 5 Reactor 32Bit 44A 4-6S 20x20 4in1 ESC. This advanced ESC is designed to provide you with precise and smooth control for your quadcopter. Enjoy a responsive feel and the responsiveness of your craft, thanks to its 32-bit processor.  Check out all our 20x20 ESCs and all 

Diatone Mamba 5 Reactor 32Bit 44A 4-6S 20x20 4in1 ESC

Diatone Mamba 5 Reactor 32Bit 44A 4-6S 20x20 4in1 ESC from WREKD Co.

Experience reliable power with the Diatone Mamba 5 Reactor 32Bit 44A 4-6S 20x20 4in1 ESC. This advanced ESC is designed to provide you with precise and smooth control for your quadcopter. Enjoy a responsive feel and the responsiveness of your craft, thanks to its 32-bit processor.  Check out all our 20x20 4in1 ESCs and

Diatone MAMBA 5 Reactor 44 ESC BL32 4IN1 ESC 44A 6S - 20x20mm

iFlight

iFlight BLITZ Mini E55S 55A 2-6S 20x20 4in1 ESC

Another great addition to iFlight's ESC lineup. With 2-6S input, up to 60A bursts, and an integrated capacitor, the iFlight BLITZ E55S is a great value option for a 20x20 ESC.
Check out all our 20x20 ESCs and all our iFlight gear selection!
Features

V1.1 added metal mosfets to the bottom of the ESC for better heat dissipation and performance. 

Specifications

Input Voltage: 2-6S

Max. Continuous Current: 55A
Max. Burst Current: 60A 
MCU: BB21
BEC: No
Current Sensor: Yes
Firmware: BLHeli_S
Target: QH-50 16.7
Mounting Dimensions: 20x20mm/Φ4mm
Dimensions 35x42mm

Weight: 11.3g


Includes

1x iFlight Blitz Mini E55S Mini (v1.1) 8Bit 55A 2-6S 20x20 4in1 ESC
1x Wiring Set


Another great addition to iFlight's ESC lineup. With 2-6S input, up to 60A bursts, and an integrated capacitor, the iFlight BLITZ E55S is a great value option for a 20x20 ESC. Check out all our 20x20 ESCs and all our iFlight gear selection! Features V1.1 added metal mosfets to the bottom of the ESC for better heat diss

iFlight Blitz Mini E55S Mini (v1.1) 8Bit 55A 2-6S 20x20 4in1 ESC from WREKD Co.

iFlight Blitz Mini E55S Mini (v1.1) 8Bit 55A 2-6S 20x20 4in1 ESC

RaceDayQuads

IFLIGHT

Aikon

Aikon AK32 Pro V2 32Bit 50A 2-6S 20x20 4in1 ESC

AIKON

The Aikon AK32 Pro II continues Aikon's pursuit of excellence! This ESC combines the latest forward-looking capabilities with top of the line reliability. 
Make sure to check out our other ESCs and entire line of Aikon gear!
Specifications

Input Voltage: 2-6S
MCU: AT32F421
Max Continuous Current: 50A
Max Burst Current: 65A
Firmware: BLHeli32
Bootloader: Yes
Mounting Pattern: 20x20mm
Weight: 13.8g

Includes

1x Aikon AK32PRO II 32bit 50A 2-6S 20x20 4in1 ESC


The Aikon AK32 Pro II continues Aikon's pursuit of excellence! This ESC combines the latest forward-looking capabilities with top of the line reliability.  Make sure to check out our other ESCs and entire line of Aikon gear! Specifications Input Voltage: 2-6S MCU: AT32F421 Max Continuous Current: 50A Max Burst Current:

Aikon AK32PRO II 32bit 50A 2-6S 20x20 4in1 ESC

The Aikon AK32Pro II 4-in-1 50A 6S continues Aikon’s pursuit of excellence! This new ESC combines the latest forward-looking capabilities with an L4-based processor and dual MOSFET packages. This allows the AK32Pro II to achieve 96khz PWM rates and the fastest DShot input rates available. Check out all the Electronic S

Aikon AK32Pro II 4in1 50A 6S BLHeli32 ESC W/ Heatsink - 20x20mm

The Aikon AK32Pro II 4-in-1 50A 6S continues Aikon’s pursuit of excellence! This new ESC combines the latest forward-looking capabilities with an L4-based processor and dual MOSFET packages.

Aikon AK32Pro II 50A 2-6S BLHeli32 4-in-1 ESC 

Aikon AK32PRO II 32bit 50A 2-6S 20x20 4in1 ESC from WREKD Co.

T-Motor Mini F60A 4-8S 4-in-1 ESC

The future is here, and it's powered by T-Motor.
The T-Motor F60A Mini 4-8S 20x20 ESC is the key to unlocking a new world of aerial adventure. With 8S capability and monster MOSFETs, this ESC will take you to the edge of the universe and beyond, with power and performance that is out of this world.
But that's not all - when you explore our selection of 20x20 FCs and all our T-Motor products, you'll discover a galaxy of possibilities. From high-speed racing to aerial acrobatics, the sky is no longer the limit.
Specifications:

Input Voltage: 4-8S LiPo
Max. Continuous Current: 60A
Max Burst Current: 70A
Telemetry: Yes
Firmware: BLHeli_32
Input Signal: DShot 150/300/600/1200/MultiShot/OneShot
Mounting Pattern: 20x20mm M3
Dimensions: 36x47mm
Weight: 14g

Includes:

1x T-Motor F60A Mini 4-8S 20x20 ESC

The T-Motor F60A Mini 4-8S 20x20 ESC - it's not just the future of aerial technology, it's the future of adventure. Are you ready to explore the stars?

The future is here, and it's powered by T-Motor. The T-Motor F60A Mini 4-8S 20x20 ESC is the key to unlocking a new world of aerial adventure. With 8S capability and monster MOSFETs, this ESC will take you to the edge of the universe and beyond, with power and performance that is out of this world. But that's not all -

T-Motor F60A Mini 4-8S 20x20 ESC from WREKD Co.

T-Motor F60A Mini 4-8S 20x20 ESC





T-Motor enters the world of ESCs yet again with another that is sure to impress! 8S capable with monster mosfets! This ESC is ready to spin props and spin them fast!!













T-Motor F66A 32Bit 66A 3-6S 20x20 4in1 ESC

The T-Motor F66A Mini 66A 3-6S BLHeli_32 4-In-1 ESC - 20x20 features double-sided heatsinks design for higher peak current. 

T-Motor F66A Mini 66A 3-6S BLHeli_32 4-In-1 ESC - 20x20

The F66A is a premium-built 4in1 ESC from T-Motor. Fully capable of pushing 6S with 77A burst and a sustained 66A current draw. Equipped with the latest in ESC technology such as 32-bit capability and BLHeli32 firmware.
Check out all our 20x20 ESCs and all our T-Motor products!

Specifications

Input Voltage: 3-6S
Current: 66A
Burst Current: 77A
Amperage Meter: 135
Firmware: BLHeli32
PWM Frequency: 16-48KHz
Weight: 21g
Dimensions: 43x34x13.5mm
Mounting Holes: 20x20 M3

Includes

1x T-Motor F66A 32Bit 66A 3-6S 20x20 4in1 ESC 


The F66A is a premium-built 4in1 ESC from T-Motor. Fully capable of pushing 6S with 77A burst and a sustained 66A current draw. Equipped with the latest in ESC technology such as 32-bit capability and BLHeli32 firmware. Check out all our 20x20 ESCs and all our T-Motor products! Specifications Input Voltage: 3-6S Curren

Rush FPV

Rush FPV Rush Blade 60A 32Bit 3-6S 48kHz 20x20 4in1 ESC - Racing Edition

The Rush Blade 60A 3-6S 48kHz BLHeli_32 4-in-1 ESC Racing Edition by RUSHFPV features, front &amp; back special process aluminum shell, BLHeli_32 Firmware, 24kHz-48KHz PWM frequency 3oz dual board and 40V rated MOSFET. Check out our other 20x20mm ESC's and the rest of our Rush FPV Products!  Features BLHeli_32 firmware

RUSHFPV Rush Blade Racing 32Bit 60A 3-6S 48kHz 20x20 4in1 ESC

RUSHFPV

The RUSHFPV 60A 3-6S BLHeli_32 4-in-1 Racing ESC fits into a narrow frame space thanks to a 15% reduction in volume!

RUSHFPV RUSH BLADE Mini 60A 3-6S BLHeli_32 4-in-1 ESC - Racing Edition - 20x20

Zeez

Zeez 45A 2020 V3 3S-6S 32Bit 4in1 ESC 

Zeez Design

The ZEEZ 45A 4-in-1 ESC comes with the fastest MCU available which is fully supported by BLHELI32 and STM32G0.

Zeez 45A 2020 V3 3S-6S BLHELI32 4-in-1 ESC

HGLRC

HGLRC Zeus 50A Pro 3-8S 20x20 4in1 ESC

High-quality, reliable ESC for those high power 8S builds, HGLRC always provides a premium product. Check out all our Electronic Speed Controllers and the rest of our HGLRC Products! Features: High-performance hardware, stable 50A, peak 60A Large MOSFET small size board, 20x20 mounting holes, is the first choice for ra

HGLRC Zeus 50A Pro 3-8S BLHeli_S 4in1 ESC - 20x20

The&nbspHGLRC Zeus 50A Pro&nbspis a 4-in-1 ESC featuring BLHeli_S firmware and a 3-8S input voltage. All of this power is packed into a large MOSFET mini-sized 20x20 board that is ideal for FPV freestyle&nbsp and racing!

The HGLRC Zeus 50A Pro is a 4-in-1 ESC featuring BLHeli_S firmware and a 3-8S input voltage. All of this power is packed into a large MOSFET mini-sized 20x20 board that is ideal for FPV freestyle  and racing!

HGLRC Zeus 50A Pro 3-8S 4-in-1 BLHeli_S ESC - Mini 20x20

NewBeeDrone Cricket200 32Bit 45A 3-6S 20x20 4in1 ESC

This NewBeeDrone Cricket200 ESC has a golden heatsink design, Smoov-Certified hardware, and comes ready to plug into your NBD Cricket200 Flight Controller.

NewBeeDrone Cricket200 45A 3-6s BLHeli_32 4-in-1 20x20 ESC

45Amp BLheli32 with NewBeeDrone Smoov-certified hardware design that supports up to 3-6S batteries to provide the best and reliable quality and performance for either freestyle or racing. Check out all our 20x20 Electronic Speed Controllers and the rest of our NewBeeDrone Products!  Cricket200 ESC Spec: LiPo Power inpu

NewBeeDrone Cricket200 ESC 45A BLHeli32 - 20x20mm

Spedix

Spedix IS40 40A 3-6S 4in1 ESC

Spedix-RC

The Spedix IS40 40A 4-in-1 20x20 ESC (3-6S) is one of the most reliable 20mm ESCs in the market and can support up to 6S racing drones!

Spedix IS40 40A 3-6S BLHeli_S 4-in-1 ESC

Flycolor X-Cross Mini 45A 3-6S 32Bit 4in1 20x20 ESC

This FLYCOLOR X-Cross Mini is a 4-in-1 ESC was designed for high-stress racing drones. The reduced impedance and high-quality MOSFET allow for high-current to effortlessly flow through to your motors.

Flycolor X-Cross Mini 45A 3-6S BL_Heli32 4-in-1 20x20 ESC

Skystars

SkyStars KM35 35A 3-6S 20x20 4in1 ESC

SkyStars

The SkyStars KM35 35A&nbsp 3-6S 20x20 4-in-1 ESC features&nbspBLHeli_S,&nbspDshot 300/600,&nbsp20X20 mounting holes, excellent over-current capability, better control performance and supports 6S Lipo batteries!

The SkyStars KM35 35A  3-6S 20x20 4-in-1 ESC features BLHeli_S, Dshot 300/600, 20X20 mounting holes, excellent over-current capability, better control performance and supports 6S Lipo batteries!

SkyStars KM35 35A BLHeli_S 3-6S 20x20 4-in-1 ESC

Frame Stack Mount

The frame is typically the first part to pick because it determines what kind of flying you’ll be doing the most. Start by picking a frame type, and narrow down the options by propeller size. The frame holds your quad parts together and heavily impacts what the quad can do. 

Frames

FC Stack Mount

The FC is the brain or the CPU of your quad. It has a processor and other components that allow it to listen to your inputs and tells the quad what to do. FCs are commonly sold together with other components integrated or stacked (like ESCs and video transmitters). For beginners, choose a FC with a F4 or F7 processor that has a compatible mount with your frame. 