FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Propeller Length (Inches)

Ummagawd

Ummagawd 2Fiddy V1.5 HD O3 Ultra Light Freestyle 3.5" - 4" Frame Kit

UMMAGAWD

The new V1.5 design fits DJI O3 System











The 2Fiddy Freestyle Drone is designed to provide maximum power, response, and durability while keeping the weight light. This simple yet durable frame combines a variety of carbon thicknesses, component layouts, and fasteners for optimized performance. Smooth resonance and vibrations make for fun and reliable flying. This frame kit comes with 4" arms and is compatible with 3.5" arms. 
"The final entry in this category is the Ummagawd 2Fiddy, designed by Tommy Tibajia. I always felt that 5” sub-250g was pointless. To get the weight down, you had to give up too much in terms of durability and the disc loading was so low that the quad was super floaty and not fun to fly. The 2Fiddy changed all that. Obviously, Tommy can’t defy the laws of physics, but it doesn’t feel super-floaty like other sub-250g 5” I’ve flown. The durability is not as high as a 3” or 3.5”, but it’s not made of glass either. And oh my gosh how good it flies. The responsiveness, acceleration, and sharp cornering are ridiculous. If you plan to crash a lot, the 2Fiddy may not be for your, but if your focus is purely on flight performance, it’s the best experience I’ve ever had under 250g." - Joshua Bardwell











Check out the rest of our 4" frames, as well as the rest of our Ummagawd selection
Features

AIO FC mounting ONLY (25.5x25.5mm)


4mm Thick Quick Swap Arms


2 Hole or Single Hole FPV Camera Mount (0-35deg)


Made for Caddx Vista (but Analog Friendly)


Toilet Tank OR Standard Battery Position


14mm (low pro) &amp 20mm (full stack) Standoffs INCLUDED


FPV Camera Hardware INCLUDED


AIO FC Hardware INCLUDED


Ummagrip INCLUDED


TWO Battery Straps INCLUDED 


Zip Ties INCLUDED


Spare Hardware INCLUDED





 Specifications

Stack Mounting: 20x20mm &amp 25.5x25.5mm (AIO FC Only)

Rear Mounting: 20x20mm 
Motor Mount Pattern: 12x12mm

Arm Thickness: 4mm

Includes

1x UmmaGawd 2Fiddy V1.5 HD O3 Ultra Light Freestyle 3.5" - 4" Frame Kit


The new V1.5 design fits DJI O3 System The 2Fiddy Freestyle Drone is designed to provide maximum power, response, and durability while keeping the weight light. This simple yet durable frame combines a variety of carbon thicknesses, component layouts, and fasteners for optimized performance. Smooth resonance and vibrat

RaceDayQuads

Ummagawd 2Fiddy V1.5 HD O3 Ultra Light Freestyle 3.5" - 4" Frame Kit from WREKD Co.

Ummagawd 2Fiddy V1.5 HD O3 Ultra Light Freestyle 3.5

Frame Size

The frame is typically the first part to pick because it determines what kind of flying you’ll be doing the most. Start by picking a frame type, and narrow down the options by propeller size. The frame holds your quad parts together and heavily impacts what the quad can do. 

Frames

Frame Kit

Frame Stack Mount

FPV Camera Mount

Frame Type

iFlight

iFlight BOB57 O3 6" Frame Kit

The iFlight BOB57 is a long-range HD drone that was designed in collaboration with pilot &amp videographer Ellis van Jason. The team crafted this cinematic 6-inch drone that ensures agility and flight time while combining the advantages of both 5-inch and 7-inch drones for both cinematic and freestyle flights.
Be sure to browse the rest of our iFlight products and DJI compatible frames, electronics and accessories.
Don't feel like building it but one one now!? We also carry the BNF!
Features

Hybrid motor design optimized for  that can be used with both bi-blade and tri-blade 6" propellers
Solid antenna mount for less ocillations when using long antennas

H-shaped frame with robust middle section for less props in view
Gladiator shell protects from dust and water droplets
Front-mounting XT-60
Compatible with DJI O3 Air Unit and Vista

Specifications

Product Name: BOB57 O3 Frame Kit
Frame wheelbase: 278mm
Frame Dimension: L165 x W225 x H34 mm
Weight: 305g
Frame Body Dimension: 34mm
Arm Thickness: 6mm
Bottom Plate Thickness: 1.5mm
Top Plate Thickness: 2mm
Upper Plate Thickness: 2.5mm
Motor Mounting: 16 x 16mm
VTX Mounting: 25.5 x 25.5/Φ1.6mm, 20 x 20/Φ2mm

 

Includes

1 x BOB57 O3 Frame Kit
1 x BOB57 TPU Parts
1 x 215mm MIPI Video Cable for DJI O3 Air Unit
4 x Motor Wire Shield Tube
1 x Battery Anti-Slip Pad
2 x Battery Strap
1 x Screw Bag


The iFlight BOB57 is a long-range HD drone that was designed in collaboration with pilot &amp; videographer Ellis van Jason. The team crafted this cinematic 6-inch drone that ensures agility and flight time while combining the advantages of both 5-inch and 7-inch drones for both cinematic and freestyle flights. Be sure

iFlight BOB57 O3 LR & Freestyle Cinematic 6" Frame Kit from WREKD Co.

iFlight BOB57 O3 LR & Freestyle Cinematic 6

iFlight BOB57 O3 LR & Freestyle Cinematic 6" Frame Kit

Introducing the iFlight BOB57 O3 Frame Kit, an innovative long-range HD drone conceptualized in a collaborative effort between iFlight and renowned pilot &amp videographer, Ellis van Jason.

Introducing the iFlight BOB57 O3 Frame Kit, an innovative long-range HD drone conceptualized in a collaborative effort between iFlight and renowned pilot & videographer, Ellis van Jason.

iFlight BOB57 O3 Ellis Van Jason Frame Kit

IFLIGHT

iFlight AOS 5 V5 5" Frame Kit

Discover the future of 5" FPV with the AOS 5 V5, engineered to revolutionize your freestyle experience. Designed with cutting-edge patent pending technology and premium materials, here's why the AOS 5 V5 is the ultimate choice for drone enthusiasts.
Be sure to browse the rest of our iFlight products and our other DJI O3 Compatible Quads and DJI compatible frames, electronics and accessories.
Features

Supports up to 5.2" Props
AOS X-Cell Anti-Vibration Technology
Three 30.5x30.5, 25.5x25.5, or 20x20 mm stacks
155° FOV no props in view
Fully DJI O3 compatible (soft mount + ND filters)
Supports 19-20mm cameras (hard or soft mounted)
Reinforced 7075 Aluminium Camera Cage
Supports Lengthwise or Toilet Tank battery mounting
⌀16 - ⌀19mm motor mounting (supports all standard 5" motors)
28x28mm M3 GoPro Mounting Pattern
32mm Rear Standoff Spacing (compatible with all AOS 5 antenna mounts)

Specifications

Product Name: AOS 5 V5 Frame Kit
Frame wheelbase: 228mm
Frame Dimension: L180xW140xH34 mm
Arm Thickness: 6mm
Top Plate Thickness: 2mm
Bottom Plate Thickness: 2mm
Upper Plate Thickness: 2.5mm
Max Flight Stack Height: 20mm
Max VTX Height: 20mm
Motor Mounting: 19x19-φ3mm/16x16-φ3mm
Flight Stack Mounting: 20x20 Φ3mm / 25.5x25.5 Φ2mm / 30.5x30.5 Φ3mm
VTX Mounting: 20x20 ⌀2mm / 25.5x25.5 Φ2mm/30.5x30.5 Φ3mm
Weight: 150g
Compatible: DJI O3 air unit/ Vista HD system/ BLITZ Whoop 1.6W VTX

Includes

1x iFlight AOS 5 V5 5" Frame Kit


Discover the future of 5" FPV with the AOS 5 V5, engineered to revolutionize your freestyle experience. Designed with cutting-edge patent pending technology and premium materials, here's why the AOS 5 V5 is the ultimate choice for drone enthusiasts. Be sure to browse the rest of our iFlight products and our other DJI O

iFlight AOS 5 V5 5" Frame Kit from WREKD Co.

iFlight AOS 5 V5 5

NewBeeDrone

NewBeeDrone Turismo 5'' Frame


This is NewBeeDrone's first 5inch light weight frame for racing and freestyle. 
Introducing the Turismo Frame. The Turismo Frame is an offering for the ultralight 5inch enthusiast who wants a versatile, ultralight frame to build a locked-in setup with a sturdy roll-cage for the ‘goods’ inside. Pairing this frame with a whoop-size AIO board, then we suggest a build with an analog vtx setup or set it up with the Caddx Vista for that digital HD cruising. If you decide to pair this ultralight frame with a signature NewBeeDrone 20x20 series stacks (Infinity200 or CricketFPV stack) then an analog vtx build is the way to go.
At-A-Glance Frame Breakdown:

Motor Layout Type: Stretched-X configuration (longer front-to-back, than side-to-side)

Motor-to-Motor: 211mm
Cam Mounting: 14x14mm
Motor Mounting hole spacing: 4-holes spaced on a 12mm diameter
Stack Mounting: Whoop AIO board - 25.4x25.4mm (1x1inch) and 20x20 stack
Weight: (with Caddx Vista mount and TPU arm guards)  -  53g


Include:Top Plate x1Bottom Plate x1Side Camera Plate x2Arm left x2Arm Right  x2Cross Plate x23D Print Part Arm edge protect x43D Print Part Vista mount x1
Recommend build: 1. NewBeeDrone Turismo 5inch Frame2. NewBeeDrone Flow 2004 motor3. JHEMCU GHF405 BLHELI_S 35A 3-6S AIO for Racing Toothpick4. Gemfan 5125 Hurricane Durable 3 Blade 1.5mm5. Caddx Vista with Nebula nano kit V2
Instruction: Link
3DPrinted part file: Link

This is NewBeeDrone's first 5inch light weight frame for racing and freestyle.  Introducing the Turismo Frame. The Turismo Frame is an offering for the ultralight 5inch enthusiast who wants a versatile, ultralight frame to build a locked-in setup with a sturdy roll-cage for the ‘goods’ inside. Pairing this frame with a

NewBeeDrone Turismo 5'' light weight frame for Racing and Freestyle from WREKD Co.

NewBeeDrone Turismo 5'' light weight frame for Racing and Freestyle

This is NewBeeDrone's first 5inch light weight frame for racing and freestyle. 
Introducing the Turismo Frame. The Turismo Frame is an offering for the ultralight 5inch enthusiast who wants a versatile, ultralight frame to build a locked-in setup with a sturdy roll-cage for the ‘goods’ inside. Pairing this frame with a whoop-size AIO board, then we suggest a build with an analog vtx setup or set it up with the Caddx Vista for that digital HD cruising. If you decide to pair this ultralight frame with a signature NewBeeDrone 20x20 series stacks (Infinity200 or CricketFPV stack) then an analog vtx build is the way to go.
At-A-Glance Frame Breakdown:

Motor Layout Type: Stretched-X configuration (longer front-to-back, than side-to-side)

Motor-to-Motor: 211mm
Cam Mounting: 14x14mm
Motor Mounting hole spacing: 4-holes spaced on a 12mm diameter
Stack Mounting: Whoop AIO board - 25.4x25.4mm (1x1inch) and 20x20 stack
Weight: (with Caddx Vista mount and TPU arm guards)  -  53g


Include:Top Plate x1Bottom Plate x1Side Camera Plate x2Arm left x2Arm Right  x2Cross Plate x23D Print Part Arm edge protect x43D Print Part Vista mount x1
Recommend build: 1. NewBeeDrone Turismo 5inch Frame2. NewBeeDrone Flow 2004 motor3. JHEMCU GHF405 BLHELI_S 35A 3-6S AIO for Racing Toothpick4. Gemfan 5125 Hurricane Durable 3 Blade 1.5mm5. Caddx Vista with Nebula nano kit V2
Instruction: Link
3DPrinted part file: Link

NewBeeDrone M-323 DC 7" Frame

NewBeeDrone M-323 7inch DC (Dead Cat) FPV Frame
Design Idea: 



Simplicity in Construction: Designed for effortless assembly and minimal maintenance.

Versatile Hardware Mounting Solutions: Offers flexibility in mounting configurations, allowing for personalized setups tailored to your needs.

Strategic Tactic Mounting Points: Featuring mounting points on both top and bottom plates, enabling users to securely fasten any accessory using straps.

Innovative Motor Arm Protection: Inspired by the Air Max concept, our motor arm protectors are crafted with a lightweight, hollow design, using durable TPU material. This not only reduces weight but also offers enhanced protection for the arm edges and motor. The snap-on installation eliminates the need for screws, ensuring the motor remains firmly attached to the frame, optimizing system performance.


Spec:

FC Mount: 20X20, 25.5X25.5, 30.5X30.5 mm
VTX Mount: 20X20 
Camera Mount: 19mm wide
Motor Mount:19x19 M3 screw mount 

 
What's include: Carbon Fiber Parts:

Top plate 2mm x1

Mid plate 2.5mm x1
 Bottom plate 2.5m x1
Front arm 6mm x2
Rear arm 6mm x2

3D Printed Parts:

Motor arm protector TPU 
TBS Crossfire nano receiver mount TPU
VTX Antenna Mount (two antenna) TPU
FPV Camera mount TPU

Hardware:

 M3  High Tensile Carbon Steel 8mm x13
M3 High Tensile Carbon Steel 10mm x18
M3 High Tensile Carbon Steel 14mm x9
M3 High Tensile Carbon Steel 16mm x5
M3 High Tensile Carbon Steel 25mm x5
M3 Nylon Lock Nut x9
 M3  7075 Aluminum Standoff 28mm x9

Accessory:

PU Battery mount sticker x1
Strap 20mm x 300mm x3
Nylon Zipties 3*100mm x5


 

NewBeeDrone M-323 7inch DC (Dead Cat) FPV Frame Design Idea:  Simplicity in Construction: Designed for effortless assembly and minimal maintenance. Versatile Hardware Mounting Solutions: Offers flexibility in mounting configurations, allowing for personalized setups tailored to your needs. Strategic Tactic Mounting Poi

NewBeeDrone M-323 7inch DC (Dead Cat) FPV Frame

NewBeeDrone M-323 7inch DC (Dead Cat) FPV Frame from WREKD Co.

NewBeeDrone Inertia 5" Frame

NewBeeDrone Inertia 5" FPV Frame

Introducing INERTIA FPV Frame, a passion project created by NewBeeDrone to push the boundary of lightweight frame design. This beast strikes a perfect balance between practicality and aesthetics. We were able to pack all of your favorite features in to this thin and light package. The crazy skinny carbon fiber arms are engineered to minimize air resistance and provide excellent structural rigidity with our special 3-point locking mechanism. The center portion of the body extends outward to further reinforce the arms and give the frame a wide-body look that’s reminiscent of a modified race car. We also ensured outstanding hardware compatibilities by including multiple mounting options for both analog and digital system. The widened front standoffs make it possible to install cameras with any lens size, perfect for the large camera of the new DJI Digital HD system. The extra-strong action camera mounting system allows you to securely carry your favorite recording devices. With its unlimited capabilities, the INERTIA frame will exceeds in all scenarios, whether you are flying cinematic, freestyle, or both.
What's included- Carbon Fiber Parts:1x Inertia Top Plate 1.5mm1x Inertia Mid Plate 2mm (M3 Press nut Installed)1x Inertia Bottom Plate 2mm4x Inertia 5 inch Arm 6mm2x Inertia FPV Cam Side Plate 1.5mm- Hardware Pack:7x Inertia M3 7075 Aluminum Standoff 20mm 3x Inertia M3 7075 Aluminum Standoff 28mm3x Inertia M2 7075 Aluminum Standoff 20mm 17x Inertia M3 High Tensile Carbon Steel 10mm13x Inertia M3 High Tensile Carbon Steel  8mm5x Inertia M3 High Tensile Carbon Steel  12mm5x Inertia M3 High Tensile Carbon Steel  16mm5x Inertia M2 High Tensile Carbon Steel  8mm6x Inertia M3 Cone Washer 
-Vista/Link VTX Hardware:4x M2 Steel Screw 18mm5x M2 Lock Nut with Nylon Ring4x M2 Dampening Grommet Small
-Accessories:2x NewBeeDrone Battery Strap Large5x NewBeeDrone Motor Wire Protector 30x75x Zip-tight 2mm x10mm-3D Printed Parts:4x Arm Protectors1x FPV Camera and Crossfire Antenna Mount1x GPS Mount (Diatone mamba m8 plus GPS Module)1x Zip-tight Style VTX Antenna Mount
NetWeight: 130g (Not include the gopro Mount and Arm protectors) 
Inertia Frame 3D Printed Part STL File 
Build Video:








NewBeeDrone Inertia 5" FPV Frame Introducing INERTIA FPV Frame, a passion project created by NewBeeDrone to push the boundary of lightweight frame design. This beast strikes a perfect balance between practicality and aesthetics. We were able to pack all of your favorite features in to this thin and light package. The c

NewBeeDrone INERTIA 5" FPV Frame from WREKD Co.

NewBeeDrone INERTIA 5

NewBeeDrone INERTIA 5" FPV Frame

NewBeeDrone Inertia DC Dead Cat 5" Frame

NewBeeDrone Inertia 5" DC (Dead Cat Style) FPV Frame

Meet the Inertia 5inch DC FPV frame - the newest addition to the Inertia series of high-performance drone frames. This innovative frame features a deadcat style design and is specifically tailored for the DJI O3 camera system, which offers stunning 4K resolution and eliminates the need for a separate action camera.The Inertia 5inch DC FPV frame is designed for optimal stability and agility, with front and rear arms angled backward to minimize prop wash and offer an unobstructed view for the DJI O3 camera system. The frame is built with durable, lightweight carbon fiber and is compatible with standard 5-inch propellers and 22xx or 23xx size motors. It also includes multiple accessory mounting options and features a modular design for easy assembly and maintenance.
Overall, the Inertia 5inch DC is a top-performing frame that is perfect for pilots looking to take their aerial photography and videography to the next level with the DJI O3 camera system. With its exceptional stability, maneuverability, and easy customization, the Inertia 5inch DC is an ideal choice for both casual and professional pilots alike.
What's included- Carbon Fiber Parts:1x InertiaDC Top Plate 1.5mm1x InertiaDC Mid Plate 2mm (M3 Press nut Installed)1x InertiaDC Bottom Plate 2mm2x InertiaDC 5 inch Front Arm 6mm2x InertiaDC 5 inch Rear Arm 6mm2x InertiaDC FPV Cam Side Plate 1.5mm- Hardware Pack:7x Inertia M3 7075 Aluminum Standoff 20mm 3x Inertia M3 7075 Aluminum Standoff 28mm4x Inertia M2 7075 Aluminum Standoff 20mm 17x Inertia M3 High Tensile Carbon Steel 10mm13x Inertia M3 High Tensile Carbon Steel  8mm5x Inertia M3 High Tensile Carbon Steel  12mm5x Inertia M3 High Tensile Carbon Steel  16mm5x Inertia M2 High Tensile Carbon Steel  8mm6x Inertia M3 Cone Washer 
-DJI O3 VTX Hardware:2x CNC Aluminum Parts5x M1.6 x 8mm Stainless steel screw Philips head5x M2-5mm screws
-Accessories:2x NewBeeDrone Battery Strap Large5x NewBeeDrone Motor Wire Protector 30x75x Zip-tight 2mm x10mm-3D Printed Parts:4x Arm Protectors1x FPV Camera and Crossfire Antenna Mount1x GPS Mount (Diatone mamba m8 plus GPS Module)1x Zip-tight Style VTX Antenna Mount
NetWeight: 130g (Not include the gopro Mount and Arm protectors) 
Inertia Frame 3D Printed Part STL File 

NewBeeDrone Inertia 5" DC (Dead Cat Style) FPV Frame Meet the Inertia 5inch DC FPV frame - the newest addition to the Inertia series of high-performance drone frames. This innovative frame features a deadcat style design and is specifically tailored for the DJI O3 camera system, which offers stunning 4K resolution and 

NewBeeDrone Inertia 5" DC (Dead Cat Style) FPV Frame from WREKD Co.

NewBeeDrone Inertia 5

NewBeeDrone Inertia 5" DC (Dead Cat Style) FPV Frame

SpeedyBee

SpeedyBee Master 5 5" Freestyle Frame Kit

Introducing SpeedyBee's Master 5 series, designed specifically for freestyle.
The innovative anti-shock fixed stack structure mitigates the effect of the motor for Gyro of FC, further stabilizing the running environment. And the arm's quick-release structure brings convenience for installation, with the number of screws averaging 1.5 per arm. Honeycomb-shaped aluminum alloy CNC drone head ensures a better look and strength. Designed with H-FOV 130 section, it provides a larger field of view. Furthermore, the detachable camera fixing plate is open for modification, supporting more mounting holes for the camera and helping get rid of vignetting. Honeycomb-shaped aluminum alloy cooling module (optional) is also designed for mounting under the VTX, improving the operation stability of DJI FPV and high-power analog VTX.
This is the regular Master 5 frame which is suitable for both analog and digital VTXs but props may be visible in certain configurations with this version
 
 


Features

Compact Model Design with Low Center of Gravity
Honeycomb-shaped CNC Aluminum alloy Camera plates
FOV130°
Innovative Independent Anti-Shock Stack Fixed Structure for stabilization
High-power VTX cooling Module
Front XT60 Plug
Arm Quick-Release

Specifications

Model: Speedy Bee Master 5 Frame
Weight: 130g
Top &amp Bottom Plate thickness: 2mm
Arm thickness: 5mm
Camera width: supports 19-20mm width
3D printed TPU Parts: Yellow
Suitable prop size: 5", 5.1"
FC mounting holes: 30.5 x 30.5mm and 20x20mm (M3)
VTX mounting holes: 20x20mm (M2)


Manual
SpeedyBee Master 5 Installation Guidelines

Introducing SpeedyBee's Master 5 series, designed specifically for freestyle. The innovative anti-shock fixed stack structure mitigates the effect of the motor for Gyro of FC, further stabilizing the running environment. And the arm's quick-release structure brings convenience for installation, with the number of screw

SpeedyBee Master 5 5

Introducing SpeedyBee's Master 5 series, designed specifically for freestyle.
The innovative anti-shock fixed stack structure mitigates the effect of the motor for Gyro of FC, further stabilizing the running environment. And the arm's quick-release structure brings convenience for installation, with the number of screws averaging 1.5 per arm. Honeycomb-shaped aluminum alloy CNC drone head ensures a better look and strength. Designed with H-FOV 130 section, it provides a larger field of view. Furthermore, the detachable camera fixing plate is open for modification, supporting more mounting holes for the camera and helping get rid of vignetting. Honeycomb-shaped aluminum alloy cooling module (optional) is also designed for mounting under the VTX, improving the operation stability of DJI FPV and high-power analog VTX.
Available in 2 versions.  The regular Master 5 frame has a 222mm wheelbase and is compatible with analog, DJI O3 Air Unit, and the Vista/Link Air Unit.  The Master 5 HD Frame has a wider 225mm wheelbase and is compatible with analog, DJI O3 Air Unit, Vista/Link Air Unit, and the original DJI Air Unit.
This is the regular Master 5 frame which is suitable for both analog and digital VTXs but props may be visible in certain configurations with this version
Check out all our DJI O3 Compatible Frames, Electronics &amp Accessories, our 5" Frames, and all our SpeedyBee products!
 


Features

Compact Model Design with Low Center of Gravity
Honeycomb-shaped CNC Aluminum alloy Camera plates
FOV130°
Innovative Independent Anti-Shock Stack Fixed Structure for stabilization
High-power VTX cooling Module
Front XT60 Plug
Arm Quick-Release

Specifications

Model: Speedy Bee Master 5 Frame
Weight: 130g
Top &amp Bottom Plate thickness: 2mm
Arm thickness: 5mm
Camera width: supports 19-20mm width
3D printed TPU Parts: Yellow
Suitable prop size: 5", 5.1"
FC mounting holes: 30.5 x 30.5mm and 20x20mm (M3)
VTX mounting holes: 20x20mm (M2)


Manual
SpeedyBee Master 5 Installation Guidelines

SpeedyBee Master 5 5" Freestyle Frame Kit from WREKD Co.

RUNCAM

Quadifier

Quadifier Diamondback HD O3 5" Freestyle Frame Kit

The Quadifier Diamond back DJI O3 is a 5 inch freestyle frame that is designed to be nimble, agile, efficient, and fit a DJI O3 system. I have always been a picky person when deciding on a frame. The Diamond Back is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop. Choose between blue or red for your TPU color on your quad.
Be sure to check out all our 5" frames, and all our Quadifier products! 
Features

Designed for 20x20 and 30x30 stacks
Has 20x20 mounting in the back for any HD VTX of your liking
Comes with all mounts required to mount the O3 system

Squish X for smaller size and better gopro shots
5mm arms


Fits micro 19x19 size cameras and the DJI O3 Camera


Specification


Stack Mounting: 30x30, 20x20
FPV Camera Mount: 19mm Micro cam
Motor Mount Pattern: 16x16 or 19x19mm
Main Plate Thickness: 2mm
Frame Shape: True X
Motor to Motor: 230mm
Arm Thickness: 5mm
Frame Weight With TPU: 115g


Includes

1x Quadifier Diamondback HD O3 5" Freestyle Frame Kit - Choose Your Color
1x TPU O3 Kit


The Quadifier Diamond back DJI O3 is a 5 inch freestyle frame that is designed to be nimble, agile, efficient, and fit a DJI O3 system. I have always been a picky person when deciding on a frame. The Diamond Back is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop. Choose bet

Quadifier Diamondback HD (Rev2) O3 5" Freestyle Frame Kit - Choose Your Color from WREKD Co.

Quadifier Diamondback HD (Rev2) O3 5

Quadifier Diamondback HD (Rev2) O3 5" Freestyle Frame Kit - Choose Your Color

The Quadifier Diamond back DJI O3 is a 5 inch freestyle frame that is designed to be nimble, agile, efficient, and fit a DJI O3 system. I have always been a picky person when deciding on a frame. The Diamond Back is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop. Check out 

Quadifier Diamondback HD DJI O3 5

Quadifier Diamondback Pro Type F 5" Freestyle Frame Kit

Experience a sleek ride with the Quadifier Diamondback Pro Type F 5" Freestyle Frame Kit. Its Squish X geometry provides a smaller size and keeps the propellers out of your camera's view.  This was designed to be a hard-core-looking frame with jagged arm ends, a gnarly-looking quad for extreme freestyle pilots! Choose between green and purple for your TPU color.
Be sure to check out all our 5" frames, and all our Quadifier products! 
Features

Designed for 20x20 and 30x30 stacks
Has 20x20 mounting in the back for any HD VTX of your liking.
Squish X for smaller size and better GoPro shots
GoPro mounts available
5mm arms
Fits micro 19x19 size cameras
Integrated XT60 connector for the top plate (included)
Weight - 130g, 150g with arm guards


Specifications

Stack Mounting: 30x30, 20x20
FPV Camera Mount: 19mm Micro cam
Motor Mount Pattern: 16x16 or 19x19mm
Mid Plate Thickness: 2.65mm
Bottom Plate Thickness: 2.7mm
Top Plate Thickness: 2.65mm
Frame Shape: Squish X geometry

Arm Thickness: 5mm

Frame Weight With TPU: 150g 

Includes


1x Quadifier Diamondback Pro Type F 5" Freestyle Frame Kit - Choose Your Color
1x Hardware set
1x TPU Micro camera mount
1x TPU AXII/lollipop antenna mount


Experience a sleek ride with the Quadifier Diamondback Pro Type F 5" Freestyle Frame Kit. Its Squish X geometry provides a smaller size and keeps the propellers out of your camera's view.  This was designed to be a hard-core-looking frame with jagged arm ends, a gnarly-looking quad for extreme freestyle pilots! Choose 

Quadifier Diamondback Pro Type F 5" Freestyle Frame Kit - Choose Your Color

Quadifier Diamondback Pro Type F 5" Freestyle Frame Kit - Choose Your 

Quadifier Diamondback Pro Type F 5" Freestyle Frame Kit - Choose Your Color from WREKD Co.

Quadifier Diamondback Pro Type F 5

PIRAT

PIRAT Hook V2 5" Frame

Pirat

Get a precise flying experience with the new PIRAT Hook V2 Frame! The V2 frame now features more durability (even in reverse), Caddx Vista integration, and adaptivity to all camera sizes. Developed in collaboration with PDEVX FPV pilot.Crafted with high-quality carbon fiber and aluminum parts, the Hook V2 is a tough frame that focuses on excellent CG balance to give a smooth, super-tunable flight. Custom made with 235mm motor distance to give you enough space for clean air and flight stability.
Features

Choose between True-X and Squished geometries with the same set of arms
5mm Ams and 2.5mm Bottom/top Plate thickness
Works with most camera sizes - 22 or 20mm
Allows 21mm Maximum Stack Height
7075 T6 Aluminum Custom Standoff
Full T10 Torx 12.9 Steel Screw Set
Chamfered Full 3K T300 Carbon
Toilet Tank LiPo Positioning
30x30 Mounting Pattern

Specifications

Carbon Material: Chamfered Full 3K T300 
Camera Size Compatibility: 22 or 20mm
Bottom/top Plate thickness: 2.5mm 
Maximum Stack Height: 21mm 
Arm Size: Choose 5" or 6"
Mounting Pattern: 30x30 
Model: Pirat Hook V2
Arm thickness: 5mm
frame weight plus hardware = 143g

Includes

2x 28mm Custom spacers in 7075 aluminum
5x 21mm Custom spacers in 7075 aluminum
16 x M3 / 8mm Black pan motor screws
1x VTX Antenna support in 3D printing
8x 6061 Aluminum Custom washers
4x M3 / 12mm T10 Torx countersunk screws
4x M3 / 16mm T10 Torx countersunk screws
6x M3 / 8mm T10 Torx countersunk screws
4x M3 / 10mm T10 Torx gold pan screws
1x 20mm / 230mm lipos straps
4x 5mm Arm (Choose 5" or 6")
4x Black self-locking nuts
4x Foam landing pad
1x Silicone lipo pad
1x Silicone eyelet
2x Camera plate
1x Bottom plate
1x Middle plate
1x Top plate
Does not include video or receiver antenna mounts


Get a precise flying experience with the new PIRAT Hook V2 Frame! The V2 frame now features more durability (even in reverse), Caddx Vista integration, and adaptivity to all camera sizes. Developed in collaboration with PDEVX FPV pilot. Crafted with high-quality carbon fiber and aluminum parts, the Hook V2 is a tough frame that focuses on excellent CG balance to give a smooth, super-tunable flight. Custom made with 235mm motor distance to give you enough space for clean air and flight stability.

Hook V2 5" Frame

Get a precise flying experience with the new PIRAT Hook V2 Frame! The V2 frame now features more durability (even in reverse), Caddx Vista integration, and adaptivity to all camera sizes. Developed in collaboration with PDEVX FPV pilot.Crafted with high-quality carbon fiber and aluminum parts, the Hook V2 is a tough frame that focuses on excellent CG balance to give a smooth, super-tunable flight. Custom made with 235mm motor distance to give you enough space for clean air and flight stability. Features Choose between True-X and Squished geometries with the same set of arms 5mm Ams and 2.5mm Bottom/top Plate thickness Works with most camera sizes - 22 or 20mm Allows 21mm Maximum Stack Height 7075 T6 Aluminum Custom Standoff Full T10 Torx 12.9 Steel Screw Set Chamfered Full 3K T300 Carbon Toilet Tank LiPo Positioning 30x30 Mounting Pattern Specifications

Hook V2 5

Check out the Hook V2 5" Freestyle Frame Kit, from PIRAT. This brand is more of the upper echelon for quality and premium frames.
The V2 frame features include more durability, Caddx Vista integration, and adaptability to all camera sizes. Developed in collaboration with PDEVX FPV pilot.


Crafted with high-quality carbon fiber and aluminum parts, the Hook V2 is a tough frame that focuses on excellent CG balance to give a smooth, super-tunable flight. Custom made with 235mm motor distance to give you enough space for clean air and flight stability.
We also have the Hook V2 7" version for this frame kit!
Be sure to check out all our 5" frames, and all our PIRAT Products.


Features

5mm Ams and 2.5mm Bottom/top Plate thickness

Works with most camera sizes - 22 or 20mm
Allows 21mm Maximum Stack Height
7075 T6 Aluminum Custom Standoff
Full T10 Torx 12.9 Steel Screw Set
Chamfered Full 3K T300 Carbon
Toilet Tank LiPo Positioning
30x30 Mounting Pattern




Specification


Stack Mounting: 30x30, 20x20
Carbon Material: Chamfered Full 3K T300 
Camera Size Compatibility: 22 or 20mm
Bottom/top Plate thickness: 2.5mm 
Maximum Stack Height: 21mm 
Arm Size: 5"
Weight: 116g
Wheelbase: 235mm
Mounting Pattern: 30x30 
Model: Pirat Hook V2
Arm thickness: 5mm
Motor Bolt Pattern: 16x16mm/19x19mm

Manual

Pirat Hook V2 Frame


Includes

PIRAT Hook V2 Freestyle 5" Frame Kit
2x 28mm Custom spacers in 7075 aluminum
5x 21mm Custom spacers in 7075 aluminum
16 x M3 / 8mm Black pan motor screws
1x VTX Antenna support in 3D printing
8x 6061 Aluminum Custom washers
4x M3 / 12mm countersunk screws
4x M3 / 16mm countersunk screws
6x M3 / 8mm countersunk screws
4x M3 / 10mm gold pan screws
1x 20mm / 230mm lipos straps
4x 5mm Arm
4x Black self-locking nuts
4x Foam landing pad
1x Silicone lipo pad
1x Silicone eyelet
2x Camera plate
1x Bottom plate
1x Middle plate
1x Top plate


Check out the Hook V2 5" Freestyle Frame Kit, from PIRAT. This brand is more of the upper echelon for quality and premium frames. The V2 frame features include more durability, Caddx Vista integration, and adaptability to all camera sizes. Developed in collaboration with PDEVX FPV pilot. Crafted with high-quality carbo

PIRAT Hook V2 Freestyle 5" Frame Kit

PIRAT Hook V2 Freestyle 5" Frame Kit from WREKD Co.

PIRAT Hook V2 Freestyle 5

Quadifier Diamondback 5" Freestyle Frame Kit

The Quadifier Diamond back is a 5 inch freestyle frame that is designed to be nimble, agile, and efficient. I (Quadifier) have always been a picky person when deciding on a frame. The Diamond Back is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop.  Choose between blue or red for your TPU color on your quad.Be sure to check out all our 5" frames, and all our Quadifier products! 
Features

Designed for 20x20 and 30x30 stacks

Has 20x20 mounting in the back for any HD VTX of your liking.

Squish X for smaller size and better GoPro shots

5mm arms

Fits micro 19x19 size cameras


Specification


Stack Mounting: 30x30, 20x20
FPV Camera Mount: 19mm Micro cam
Motor Mount Pattern: 16x16 or 19x19mm
Main Plate Thickness: 2mm
Frame Shape: Squished X
Motor to Motor: 230mm
Arm Thickness: 5mm
Frame Weight With TPU: 113g


Includes

1x Quadifier Diamondback 5" Freestyle Frame Kit 
1x TPU Kit


The Quadifier Diamond back is a 5 inch freestyle frame that is designed to be nimble, agile, and efficient. I (Quadifier) have always been a picky person when deciding on a frame. The Diamond Back is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop.  Choose between blue or re

Quadifier Diamondback 5" Freestyle Frame Kit - Choose Your Color

Experience freestyle flying like never before with the Quadifier Diamondback, a 5-inch freestyle frame that blends speed, agility, and strength in a sleek and stylish package. Machined from high-quality carbon fiber, the Diamondback is lightweight, durable, and designed to maximize stability for unparalleled performanc

Quadifier Diamondback 5

Quadifier Diamondback 5" Freestyle Frame Kit - Choose Your Color from WREKD Co.

Quadifier Baby Diamondback 3.5" Micro Freestyle Frame Kit

The Quadifier Baby Diamond back is a 3.5 inch freestyle frame that is designed to be nimble, agile, and efficient. I have always been a picky person when deciding on a frame. The Baby DiamondBack is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop.  Choose between blue or red for your TPU color on your quad.
Be sure to check out all our 3.5" frames, and all our Quadifier products! 
Features

Designed for 20x20 stack

3mm arms

Fits micro 19x19 size cameras

Specification


Stack Mounting: 20x20
FPV Camera Mount: 19mm Micro cam
Motor Mount Pattern: 9x9 M2 ,12x12 M2
Main Plate Thickness: 2mm
Frame Shape: Squished X
Motor to Motor: 160mm
Arm Thickness: 4mm
Frame Weight With TPU: 65g


Includes

1x Quadifier Baby Diamondback 3.5" Freestyle Frame Kit
1x TPU Kit


The Quadifier Baby Diamond back is a 3.5 inch freestyle frame that is designed to be nimble, agile, and efficient. I have always been a picky person when deciding on a frame. The Baby DiamondBack is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop.  Choose between blue or red

Quadifier Baby Diamondback Freestyle 3.5" Micro Frame Kit (Rev2) - 4mm Arms - Choose Your Color from WREKD Co.

Quadifier Baby Diamondback Freestyle 3.5

Quadifier Baby Diamondback Freestyle 3.5" Micro Frame Kit (Rev2) - 4mm Arms - Choose Your Color

The Quadifier Baby Diamond back is a 3 inch freestyle frame that is designed to be nimble, agile, and efficient. I have always been a picky person when deciding on a frame. The Baby Diamond Back is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop. Check out all our 3" Frames 

Quadifier Baby Diamondback 3

The Quadifier Baby Diamond back is a 3.5 inch freestyle frame that is designed to be nimble, agile, and efficient. I have always been a picky person when deciding on a frame. The Baby DiamondBack is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop.
Be sure to check out all our micro frames, and all our Quadifier products! 
Features

Designed for 20x20 stack

3mm arms

Fits micro 19x19 size cameras

Specification


Stack Mounting: 20x20
FPV Camera Mount: 19mm Micro cam
Motor Mount Pattern: 9x9 M2 ,12x12 M2
Main Plate Thickness: 2mm
Frame Shape: Squished X
Motor to Motor: 160mm
Arm Thickness: 4mm
Frame Weight With TPU: 65g


Includes

1x Quadifier Baby Diamondback 3.5" Freestyle Frame Kit
1x TPU Kit


The Quadifier Baby Diamond back is a 3.5 inch freestyle frame that is designed to be nimble, agile, and efficient. I have always been a picky person when deciding on a frame. The Baby DiamondBack is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop. Be sure to check out all ou

Quadifier Baby Diamondback Freestyle 3.5" Micro Frame Kit (Rev2) - 4mm Arms

Quadifier Baby Diamondback Freestyle 3.5" Micro Frame Kit (Rev2) - 4mm

Quadifier Baby Diamondback Freestyle 3.5" Micro Frame Kit (Rev2) - 4mm Arms from WREKD Co.

PIRAT Sloop V3 5" Frame

Replacement Camera Plates for the Pirat Sloop V3 5" drone frame. Check out our 5" Frames and the rest of our Pirat Frames Collection! Includes 2 x Pirat Sloop V3 5" Drone Frame Replacement Camera Plate

PIRAT Sloop V3 5

Replacement Top Plate for the Pirat Sloop V3 5" drone frame. Check out our 5" Frames and the rest of our Pirat Frames Collection! Includes 1 x Pirat Sloop V3 5" Drone Frame Replacement Top Plate

Mounting kit for installing the Caddx Vista in the Pirat Sloop V3 5" drone frame. Check out our 5" Frames and the rest of our Pirat Frames Collection! Includes 1 x PIRAT Sloop V3 5" FPV Drone Caddx Vista Mounting Kit

Check out the Sloop V3 5" Freestyle Frame Kit, from PIRAT.  This brand is more of the upper echelon for quality and premium frames out there. 
Crafted with high-quality carbon fiber and aluminum parts, the Sloop is a tough frame that focuses on excellent CG balance to give smooth, super-tunable flight.


Developed in collaboration with FPV Pilot J-True, here comes the third version of the Pirat Sloop frame! Developed to be "smooth as hell" and capable of cinematic or juicy freestyle flight. The frame features our special cross plate mounting system which increases stiffness, reduces frame resonance, and prevents breaks. It features 20x20mm mounting holes in the rear for mounting of a Caddx Vista air unit or an analog video system.


Be sure to check out all our 5" frames, and all our PIRAT Products.


Features

30x30 stack
Mini camera size (predator mini like / 22mm width)
Chamfered Full 3K T300 carbon
7075 T6 aluminum custom standoff
Full T10 Torx 12.9 steel screw set.
5mm arms, 2.5mm bottom &amp top plate
27mm height for your stack.

Specification


Stack Mounting: 30x30
Carbon Material: Chamfered Full 3K T300 
Camera Size Compatibility: 22 or 20mm
Bottom/top Plate thickness: 2.5mm 
Maximum Stack Height: 21mm 
Arm Size: 5"
Arm thickness: 5mm

Motor Bolt Pattern: 16x16mm/19x19mm

Manual

Pirat Sloop V3 Manual


Includes

1x PIRAT Sloop V3 5" Freestyle Frame Kit
4x 5mm Arm 5"

1x 2.5mm Bottom plate
1x 2.5mm Top plate
2x 1.5mm Camera plate
1x 2mm Cross plate
1x 3D Printed VTX Antenna Mount
8x 6061 Aluminum Custom washers
4x 28mm Custom standoffs in 7075 aluminum
4x 21mm Custom standoffs in 7075 aluminum
4x Custom design 5mm standoffs in 7075 aluminum
8x Black Hex Press nuts
8x 8mm M3 Torx T10 12.9 steel countersunk screws
8x 12mm M3 Torx T10 12.9 steel countersunk screws
4x 10mm M3 Torx T10 12.9 steel gold colored mushroom head screws
4x 15mm M3 Torx T10 12.9 steel countersunk head screws
2x 20mm / 220mm lipo strap
1x Silicone grommet for battery cable
1x Silicone lipo pad
4x Foam landing pad
1x Torx T10 key


Check out the Sloop V3 5" Freestyle Frame Kit, from PIRAT.  This brand is more of the upper echelon for quality and premium frames out there.  Crafted with high-quality carbon fiber and aluminum parts, the Sloop is a tough frame that focuses on excellent CG balance to give smooth, super-tunable flight. Developed in col

PIRAT Sloop V3 5" Freestyle Frame Kit

Developed in collaboration with FPV Pilot J-True, here comes the third version of the Pirat Sloop frame! Developed to be "smooth as hell" and capable of cinematic or juicy freestyle flight. The frame features our special cross plate mounting system which increases stiffness, reduces frame resonance, and prevents breaks

PIRAT Sloop V3 5" Freestyle Frame Kit from WREKD Co.

Replacement Cross Plate for the Pirat Sloop V3 5" drone frame. Check out our 5" Frames and the rest of our Pirat Frames Collection! Includes 1 x Pirat Sloop V3 5" Drone Frame Replacement Cross Plate

Replacement Bottom Plate for the Pirat Sloop V3 5" drone frame. Check out our 5" Frames and the rest of our Pirat Frames Collection! Includes 1 x Pirat Sloop V3 5" Drone Frame Replacement Bottom Plate

Replacement Center Plate for the Pirat Sloop V3 5" drone frame. Check out our 5" Frames and the rest of our Pirat Frames Collection! Includes 1 x Pirat Sloop V3 5" Drone Frame Replacement Center Plate

Luma Quad

Luma Quad Luma 55 5.5" Freestyle Frame Kit

Luma Quads













Take your drone filming to the next level with the Luma 55 freestyle frame kit. Offering superior performance and durability, it allows you to push the boundaries of traditional quadcopters and capture stunning visuals like never before. 5.5" provides extra thrust and performance beyond what a standard 5" can offer, to accommodate the heavier GoPro cameras we now love and use. The Luma 55 strikes a perfect balance between the agility of a 5-inch freestyle drone and the planted feel of a 6-inch cinematic cruiser, creating a harmonious blend of speed and stability perfect for cinematic work. With the Luma 55, you can effortlessly track and follow fast-moving subjects such as drift cars, boats, and motorbikes, capturing stunning footage with precision and ease. 










Be sure to check out all our 5" frames, as well as our Luma Quads Products!

Features


Support for up to 5.5" props

HD VISTA / Analog / DJI O3 Air Unit Compatible

Replaceable 6x8mm arms. (single design)

Vibration dampened main stack mounting

The mounting support for the new Air Unit 03 Camera as well as other MINI to Nano sized FPV cameras
T300 carbon frame

YFS 12.9 grade steal hardware bolts
Complete set of 3D prints for your quad

Specifications 

Stack Mounting: 20x20mm

Rear Mounting: 20x20mm and 25.5x25.5mm
Motor Mount Pattern: 16x16 and 19x19mm (M3)

Mid Plate Thickness: 2mm
Top and Bottom Plate Thickness: 2.5mm
Motor to Motor: 245.7mm

Arm Thickness: 6mm
Frame Weight With TPU: 160g


Includes
1x Luma Quads Luma 55 5.5" Freestyle Frame Kit
1x Hardware set
1x 3D Print Set
2x Luma Lipo Straps
Luma 55 Official 4.4 Betaflight PID Tune  

Team Luma is proud to bring all Luma 55 pilots a new Betaflight tune for 4.4!
Along with the improvements to GPS rescue and HD integration, 4.4 has had a complete overhaul of the PID controller, which means that a new tune was required to allow for optimum performance. Much like the previous tune for Betaflight 4.2, this revised tune was completed in collaboration with none other than Team Luma pilot Joseph Webb (otherwise known as JWebb FPV), and has been pushed to its absolute limits. Joseph is a true legend in the Australian drone industry. Known for his incredible freestyle piloting skills and unmatched expertise in Betaflight tune development, he is a valuable contributor to our mission of creating the most outstanding products for our entire community.Check out Joseph here: https://www.instagram.com/jwebb.fpv/ and his YT Channel here: https://www.youtube.com/@JWebbFPV and show him some love!
Notes:
- This tune was deveolped using 2306.5 Size motors.- To allow for optimum performance, we recommend installing a 1000μF 35V Low ESR capacitor, along with a TVS diode.
- Be sure to use the latest BF Configurator (we're using 10.9.0)
- Ensure that you cross-reference the values after the CLI dump with the screenshots below (better safe than sorry!)
- Filters were left untouched to ensure that the tune had proper continuity between builds. If you are looking to extract more performance, or attempting to rectify an issue, add more or less filtering via the sliders as required.
- Make sure that you test hover the Luma 55 in a safe area, and check motor temperatures after 20-30 seconds. If they are hot to the touch, then do NOT proceed - ensure the build is up to scratch, and if the issue persists, get in contact and we'll do our best to point you in the right direction
Thank you for your continued support.
DISCLAIMER: LumaQuad does not hold responsibility or liability for any mechanical damage to your personal setup - this tune has been tested and verified on multiple setups to ensure that it is safe for customers.
4.4 Tune (Official v1.0)
CLI Input.
set dterm_lpf1_dyn_min_hz = 0set dterm_lpf1_dyn_max_hz = 0set dterm_lpf1_dyn_expo = 0set dterm_lpf1_type = PT1set dterm_lpf1_static_hz = 75set dterm_lpf2_type = PT1set dterm_lpf2_static_hz = 150set dterm_notch_hz = 0set dterm_notch_cutoff = 0set vbat_sag_compensation = 0set pid_at_min_throttle = ONset anti_gravity_gain = 65set anti_gravity_cutoff_hz = 5set anti_gravity_p_gain = 100set acc_limit_yaw = 0set acc_limit = 0set crash_dthreshold = 50set crash_gthreshold = 400set crash_setpoint_threshold = 350set crash_time = 500set crash_delay = 0set crash_recovery_angle = 10set crash_recovery_rate = 100set crash_limit_yaw = 200set crash_recovery = OFFset iterm_rotation = OFFset iterm_relax = RPset iterm_relax_type = SETPOINTset iterm_relax_cutoff = 14set iterm_windup = 85set iterm_limit = 400set pidsum_limit = 500set pidsum_limit_yaw = 400set yaw_lowpass_hz = 100set throttle_boost = 5set throttle_boost_cutoff = 15set p_pitch = 50set i_pitch = 55set d_pitch = 33set f_pitch = 115set p_roll = 48set i_roll = 60set d_roll = 30set f_roll = 120set p_yaw = 47set i_yaw = 60set d_yaw = 0set f_yaw = 100set angle_level_strength = 50set horizon_level_strength = 50set horizon_transition = 75set level_limit = 55set horizon_tilt_effect = 75set horizon_tilt_expert_mode = OFFset abs_control_gain = 0set abs_control_limit = 90set abs_control_error_limit = 20set abs_control_cutoff = 11set use_integrated_yaw = OFFset integrated_yaw_relax = 200set d_min_roll = 23set d_min_pitch = 27set d_min_yaw = 0set d_max_gain = 37set d_max_advance = 20set motor_output_limit = 90set auto_profile_cell_count = 0set launch_control_mode = NORMALset launch_trigger_allow_reset = ONset launch_trigger_throttle_percent = 20set launch_angle_limit = 0set launch_control_gain = 40set thrust_linear = 0set transient_throttle_limit = 0set feedforward_transition = 0set feedforward_averaging = OFFset feedforward_smooth_factor = 25set feedforward_jitter_factor = 7set feedforward_boost = 15set feedforward_max_rate_limit = 90set dyn_idle_min_rpm = 0set dyn_idle_p_gain = 50set dyn_idle_i_gain = 50set dyn_idle_d_gain = 50set dyn_idle_max_increase = 150set level_race_mode = OFFset simplified_pids_mode = OFFset simplified_master_multiplier = 100set simplified_i_gain = 75set simplified_d_gain = 110set simplified_pi_gain = 115set simplified_dmax_gain = 0set simplified_feedforward_gain = 90set simplified_pitch_d_gain = 100set simplified_pitch_pi_gain = 110set simplified_dterm_filter = ONset simplified_dterm_filter_multiplier = 100set tpa_mode = PDset tpa_rate = 30set tpa_breakpoint = 1350



Legacy 4.29 Tune (v1.0)
CLI Input.
# profile 0set dyn_lpf_dterm_min_hz = 80set dyn_lpf_dterm_max_hz = 200set dyn_lpf_dterm_curve_expo = 8set dterm_lowpass2_hz = 250set anti_gravity_gain = 6500set feedforward_transition = 38set iterm_relax_cutoff = 13set p_pitch = 68set i_pitch = 102set f_pitch = 80set p_roll = 65set i_roll = 100set d_roll = 37set f_roll = 80set p_yaw = 50set i_yaw = 80set f_yaw = 80set d_min_roll = 0set d_min_pitch = 0
LUMA 55 FRAME ASSEMBLY GUIDE


Kit contents:






     


Hardware:

Carbon:



4x
28mm Aluminum standoff.
1x
2.5mm Top-plate.


2x
20mm Aluminum standoff.
1x
2mm Mid-plate.


9x
Steel M3 12mm. (12.9 grade)
1x
2.5mm Bottom-plate.


5x
Steel M3 8mm. (12.9 grade)
4x
6x8mm Arms.


9x
Steel M3 10mm. (12.9 grade)




7x
M3 Steel Washer.




9x
M3 Steel Pressnut.
Extras:



5x
M3 Silicone soft-mount gummies.
1x

 
 3mm Foam Battery Pad




1x
M5 Steel Clinch Nut.
2x
Luma 250mm Lipo Straps.


1x
M5 20mm Flathead Bolt.




5x
M3 Steel 20mm. (12.9 grade)




5x
M2 Steel 20mm. (12.9 grade)




5x
M2 Steel Nut












TPU parts:







1x
Front bumper.




4x
Arm Bumpers.




4x
Arm Wire Protectors.




4x
Mini to Nano FPV camera mounts.




1x
Front GoPro Hard mount.




1x


Rear Vista antenna and T mount






1x
Rear SMA antenna and T mount




1x
20x20 M3 stack RX mount.




1x
20x20 M2 stack RX mount.








LUMA 55 BUILD GUIDE v1.0 
This is the Mid plate.Note the notch at the top of the image, this indicates the back of the frame.

This is the Bottom plate.It has no notch and the flat end at the bottom indicates the front of the frame.



Install 8x Press nuts into the 8x holes in the Mid plate as follows.


Check out the following Video from Phaser FPV For the correct way to install Press nuts into the carbon Mid plate..
DO NOT USE A HAMMER!

Install The Main stack Gummies:


Check out the following video for the correct way to install Gummies into the carbon Mid plate using Dental floss or Fishing wire.
The video shows installation into an FC/ESC..  this technique is the same for carbon.

Insert 8x 12mm M3 Cap head bolts through the Bottom plate.

  
Note: A single design is used for all 4 arms.
Orientate them so the rounded corners go on the top and bottom and the sharper corners are on the sides.
 

Attach each arm to the Bottom plate over the 12mm bolts.


Place the Mid plate loosely on top.

 
Flip the frame over and pick up any bolts you dropped )
Screw each 12 MM bolt in a single turn at a time using Loctite Blue 242 Threadlocker.
Work your way around multiple times until the whole thing comes together evenly.
Once everything's locked in nice and square you can go around and give it a final tighten.

 
 
 
Take 4x 10mm Bolts 2x M3 washers and the Front Bumper print.
 
 
Install washers on the front two bolts and insert through the Bumper into the bottom of the Bottom plate.


Secure with 4x 28mm Standoffs.


 
Insert your FPV camera mounts over the front 2 standoffs.


Grab 2x 8mm Bolts and do the same for the rear 2 holes, using 2x 20mm standoffs to secure. 




Insert the rear antenna mount over the rear standoffs.


Insert 4x 20mm M3 bolts through the main stack gummies, twist gently and slowly so you don't pop the gummies out.


Use stack spacer prints if required to add some clearance so your ESC sits clear of the press nuts and carbon. 


 
 

Install the Top-plate, triangle pointing to the front.

Grab 4x 10mm M3 bolts, 4x M3 Washers and the HD Mount Print.
Insert the 4 bolts through the 4 washers into the top of the mount and secure to the 4 28mm Standoffs.



 
Use 2x 8mm M3 bolts for the rear two holes.


Line up the Lipo pad with the triangle and stick it to the Top plate 

 
Insert the M5 Clinch nut into the HD mount print. 
Note: The nut will seat inside the lip of the print and not fall out if you seat it properly, use a little force to get it past the lip.


Arm bumpers go on the end of the arms.


The Printed Arm wire guards go over the motor wires and are secured with electrical tape. 

   




Take your drone filming to the next level with the Luma 55 freestyle frame kit. Offering superior performance and durability, it allows you to push the boundaries of traditional quadcopters and capture stunning visuals like never before. 5.5" provides extra thrust and performance beyond what a standard 5" can offer, to

Luma Quads Luma 55 5.5" Freestyle Frame Kit

Luma Quads Luma 55 5.5" Freestyle Frame Kit from WREKD Co.

Luma Quads Luma 55 5.5

FPV Camera Included

The VTX processes the image from your FPV camera and sends it to your goggle’s video receiver (VRX). If you chose as digital video system, you need a VTX that matches the system. Most analog VTXs and VRXs are compatible with each other, and your biggest consideration will be how much output power you need. The more output power, the more range and better signal you’ll get. Learn more about VTXs.

Video Transmitters

FlyFishRC

FlyFishRC Volador II VX6 O3 6" Freestyle Frame

FLYFISH


Check out our other 6" frames, as well as the rest of our FlyFishRC products selection!
Assembly Guide

Features

High-quality T700 carbon plate
7075 aluminum alloy camera mounting plates for enhanced protection
Cleverly designed thickened arms
The integrated XT60 connector for safety and reliabililty
High quality TPU parts
Unique anti-slip battery pad
12.9 strength hardware coated with Loctite
Compatible with DJI O3 Air Unit/Caddx Vista/Runcam link Wasp/Avatar HD, etc(Not compatible with DJI FPV Air Unit)


Specifications

Arm Thickness: 6mm
Top plate thickness: 2.5mm
Middle plate thickness: 3mm
Bottom plate thickness: 3mm
Propeller size: 6~6.1 inch
Material: T700 carbon plate
FPV cam spacing: 19mm/20mm
Weight: 216.1g(with TPU parts)  Wheelbase: 260mm
Total Dimensions: 209mm x 159mm  
Stack mounting holes: 20mm x 20mm/30.5mm x 30.5mm(M3)
VTX mounting holes: 20mm x 20mm/25.5mm x 25.5mm(M2)


Check out our other 6" frames, as well as the rest of our FlyFishRC products selection! Assembly Guide Features High-quality T700 carbon plate 7075 aluminum alloy camera mounting plates for enhanced protection Cleverly designed thickened arms The integrated XT60 connector for safety and reliabililty High quality TPU pa

FlyFishRC Volador II VX6 HD O3 6" Freestyle Frame

FlyFishRC Volador II VX6 HD O3 6" Freestyle Frame from WREKD Co.

FlyFishRC Volador II VX6 HD O3 6

FlyFishRC FIFTY5 5.5" Freestyle Frame Kit

If you are looking for a light weight 5.5" frame, look no further than the FIFTY5!
Check out what FlyFishRC has to say about their new frame! 
Made from the finest materials, the FIFTY5 features FlyFishRC signature flat CNC metal cam plates, a premium T700 carbon frame and features a smooth surface and chamfered edges, making this frame a sustainable and aesthetically pleasing work of art.
Introducing the FlyFishRC FIFTY5 - One of the best 5.5 Inch Freestyle Frames out there!Made with highest precision, the FlyFishRC FIFTY5 boasts the FlyFishRC signature, high-strength CNC metal camera plates you all know so well already, as well as top-notch T700 carbon fiber plates. The smooth surface and chamfered edges not only add to its durability but also make it a work of art. And once again, as our signature thing, this frame comes complete with all the necessary accessories for your analog and HD builds. Plus, we've included hardware with a bit of Loctite for added reliability, ensuring your setup stays secure.At the heart of our design philosophy for the FIFTY5 frame lies the pursuit of lightweight simplicity and durability. While our Volador VX5/6 is extremely durable and known as a flying tank, it's not synonymous with lightweight or ease of assembly.So, we went on to plan our next frame and we wanted something ever so slightly unusual. First thing we thought of was the size, of course. 5 or 6 inch? The 6-inch quad, known for its speed and payload capacity, could feel a bit sluggish and lacked agility. On the other hand, the nimble 5-inch frame was highly agile but somewhat limited in lifting capacity. Well, why not create a 5.5-inch frame that combines the best of both worlds?With the FIFTY5, you get the strength of a 6-inch platform and the agility of a 5-inch, striking the perfect balance. While it was originally designed for 5.5-inch props (and we recommend you to use those), it offers you the flexibility to opt for standard 5-inch props without missing a beat.FIFTY5 is definitely not the first frame to be able to run 5.5 inch props, however, it is a fantastic frame that's slightly larger than your regular 5, remarkably easy to assemble, and really lightweight, tipping the scales at just 127g with essential TPU components. Say goodbye to the need for lighter batteries when mounting a GoPro the FIFTY5 handles it effortlessly. Want extended flight times? Simply use a larger battery, and this frame is ready to rise to the occasion. And the best thing, IT RIPS nothing else!The FlyFishRC FIFTY5 embodies the essence of innovation - where form meets function, and the pursuit of the perfect balance results in a frame that's versatile, agile, and exceptionally easy to use.
Check out our other 5" frames as well as the rest of our FlyFishRC products selection!
Features

FIFTY 5 Manual Click

High-end T700 carbon fiber

Well thought through structured design

Just 127.7g with essential TPU parts

5mm thick stiff and strong arms

CNC aluminum camera plates offering superior protection

The silicone shock-absorbers for the O3 AU to eliminate jello

Compatible with both 19/20mm cameras

High-quality TPU parts

Ability to run both 5 and 5.5 inch props

Very good for smooth cinematic flying, fast speed chasing, and freestyle

Equipped with all accessories needed for analog and HD builds

12.9-grade strength hardware with Loctite threadlocker pre-applied




Specifications

Model: FIFTY5

Geometry: True-X

Wheelbase:255mm

Arm thickness: 5mm

Top plate thickness: 2mm

Middle plate thickness: 2.5mm

Bottom plate thickness: 2.5mm

Propeller size: 5~5.5 inch

CNC plate thickness: 6mm

FPV cam spacing: 19mm/20mm

Weight: 127.7g(with Antenna, Bumper, RX TPU parts)

Total Dimensions:180.3mmx180.3x33mm

Stack mounting holes: 20mmx20mm/30.5mmx30.5mm(M3)

VTX mounting holes: 20mmx20mm/25.5mmx25.5mm(M2)

Includes

1x FlyFishRC FIFTY5 5.5" Freestyle Frame Kit 
1x Prints &amp Accessories 


If you are looking for a light weight 5.5" frame, look no further than the FIFTY5! Check out what FlyFishRC has to say about their new frame!  Made from the finest materials, the FIFTY5 features FlyFishRC signature flat CNC metal cam plates, a premium T700 carbon frame and features a smooth surface and chamfered edges,

FlyFishRC FIFTY5 5.5" Freestyle Frame Kit from WREKD Co.

FlyFishRC FIFTY5 5.5

FlyFishRC Tony 5 5" Ultralight Freestyle Frame Kit

If you are looking for the next quality ultra-light 5" frame, look no further than the Tony 5!
Check out what FlyFishRC has to say about their frame! 
FlyFishRC is excited to introduce a new addition to the relatively fresh sub-250g 5” freestyle drone category - the FlyFishRC Tony!In this modern era, where our hobby meets with aircraft weight restrictions, flying drones larger than 3” has become increasingly challenging. However, we all love a rip on a good old 5” drone, don't we? That's why we believed it was the perfect time to create an exceptionally lightweight 5-inch frame with the potential to craft a sub-250g 5” drone. And that's how Tony came to life.Our objectives were clear: create a lightweight frame with excellent flight characteristics and durability. While these aims are relatively straightforward with a standard 5-inch frame, working with a sub-250g 5” frame is an entirely different animal. We won't pretend that this frame was developed without any compromises, but we've given our all to make it a frame you'll eagerly take out to fly day after day!Tony is a straightforward and easy-to-build platform, fully O3-ready, equipped with our signature CNC aluminum camera plates to ensure your valuable camera remains maximally protected during all types of crashes. It's also compatible with analog cameras, VTX, as well as the HDZERO and Walksnail HD systems (Please verify dimensions for compatibility with all VTXs).We highly recommend using AIO flight controllers to keep the weight as light as possible, although a 20x20 mini stack will also work well.For instance, to achieve a sub-250g configuration in our test builds, we utilized a 40A AIO FC, CADDX Vista Nebula Pro, 2004 FlyFishRC Flash motors, TBS Crossfire Nano, bi-blade HQ props, GNB HV 380mAh 6S battery, and one battery strap, resulting in an all-up weight of 248.7g.However, if your intention is to use this frame with the DJI O3 system, the all-up weight of such a setup will increase to around 260g, as the O3 is notably heavier than the Vista. In this case, if staying under 250g is crucial, you might contemplate using a 4S version of the same battery or stripping down the O3 to shave off some of the excess weight.Overall, Tony is an exciting frame that offers an incredibly enjoyable flying experience. It provides a distinct feeling of being nimble yet not overly floaty due to its lightness. Get your own Tony today and share your feedback online we'd love to hear about your experience!Anyway...- WHAT’S YOUR NAME?!- TONYYYYY!
Check out our other 5" frames as well as the rest of our FlyFishRC products selection!
Features


Tony 5 Manual Click

Only 57g (w/TPU)

Sub250g capable

High structural strength

High-end T700 carbon fiber

CNC aluminum camera plates

Silicone shock-absorbers for O3 AU

Compatible with both 19/20mm cameras

Compatible with most VTX

Compact body, well suited for freestyle

Equipped with all accessories needed for analog and HD builds

12.9-grade strength hardware with Loctite threadlocker pre-applied


Specifications

Model: Tony 5

Geometry: True-X

Wheelbase:215mm

Arm thickness: 4mm

Top plate thickness: 2mm

Middle plate thickness: 2mm

Bottom plate thickness: 2mm

Propeller size: 5inch

CNC plate thickness: 4mm

FPV cam spacing: 19mm/20mm

Weight: 57g(with TPU parts)

Total Dimensions:133.7mmx168x29mm

Stack mounting holes: 20mmx20mm/25.5mmx25.5.5mm(M3)

VTX mounting holes: 20mmx20mm/25.5mmx25.5mm(M2)

Includes

1x FlyFishRC Tony 5 5" Freestyle Frame Kit - Sub250 


If you are looking for the next quality ultra-light 5" frame, look no further than the Tony 5! Check out what FlyFishRC has to say about their frame!  FlyFishRC is excited to introduce a new addition to the relatively fresh sub-250g 5” freestyle drone category - the FlyFishRC Tony!In this modern era, where our hobby me

FlyFishRC Tony 5 5" Freestyle Frame Kit - Sub250

FlyFishRC Tony 5 5" Freestyle Frame Kit - Sub250 from WREKD Co.

FlyFishRC Tony 5 5

Armattan

Armattan Beaver 5" Frame Kit

Introducing the Armattan Beaver. This one is three years coming. It's the longest we have ever spent working on a frame. Well, to be frank, the 2020 situation made us put a pause on development for a little while. Nonetheless, this design has taken a very long time and it has gone through many more iterations and proto

Armattan Beaver 5

All Armattan warranty claims must be handled directly through Armattan. Please follow this link with instructions on how to file for a warranty claim. https://armattanquads.com/warranty-claims/



After many designs and prototypes, the Armattan Beaver Frame 5" Quadcopter Frame Kit is here! The Armattan Beaver features a strong carbon frame with thicker arms than previous versions which makes it the strongest to date. This frame focuses on noise reduction, easy maintenance,  and versatility for use with a variety of electronics. With a weight of 126g, this frame is lighter than previous Armattan frames. 








Check out our other 5" frames, as well as the rest of our Armattan selection!


Features


Ease of maintenance: Only one bolt needs to be removed to replace an arm at the field
Well-balanced frame (strength and weight distribution)
Great price point for a high-end, freestyle frame
Thicker arms than any other previous frame
Light and small camera cage
Easy to tune for newcomers
Strong, stiff and light frame
Crash-protection provisions
Good-looking frame
Lifetime warranty
Noise reduction
Versatile


Specifications

Stack Mounting: Two 30.5x30.5mm stacks(center and rear) + Two 20x20mm stacks (4 possible positions)
FPV Camera Mount: 20mm(DJI) or 19mm Micro cam
Motor Mount Pattern: 16x16 or 16x19 or 19x19mm
Warrantied Parts: All CF and alumi frame parts
Main Plate Thickness: 2.5mm
Frame Shape: Compressed X
Frame Weight: 126 grams
Max Stack Height: 25mm
Motor to Motor: 235mm
Arm Thickness: 5mm

Includes
Carbon Fiber

1x 2mm bottom plate
1x 2.5mm main plate
4x 5mm arms 5 inch
1x 2mm top plate
1x 4mm arm core

Hardware

 4x M3 25mm profiled alumi standoff
5x M3 20mm button head iron bolt
6x Aluminum cone spacer orange
5x M3 6mm nylon standoff F/F
20x M3 6mm 12.9 grade bolt
5x M3 10mm 12.9 grade bolt
5x M2 2.5mm cup head bolts
2x M3 20mm alumi standoff 
9x M3 12mm cup head bolt
3x M3 16mm cup head bolt
5x M2 18mm cup head bolt
5x M2 nylon washer
14x M3 nylon nuts
5x M2 nylock

Metal

1x Right aluminum cam brace orange
1x Left aluminum cam brace orange
2x Aluminum tail posts orange
2x Aluminum cam saver black

Foam

4x Dog bone landing pads
1x Air unit foam
1x Center foam
1x Lite grip

Accessories

1x 25cm clear heat-shrink 20mm wide
4x Motor wire extension PCB
1x Universal antenna mount
2x White lipo strap


All Armattan warranty claims must be handled directly through Armattan. Please follow this link with instructions on how to file for a warranty claim. https://armattanquads.com/warranty-claims/ After many designs and prototypes, the Armattan Beaver Frame 5" Quadcopter Frame Kit is here! The Armattan Beaver features a s

Armattan Beaver 5" Frame from WREKD Co.

Armattan Beaver 5" Frame

ARMATTAN

ImpulseRC

ImpulseRC Micro Apex 4" Frame

IMPULSERC

The infamous ImpulseRC Micro Apex 4" Frame Kit has been shrunk down into a micro-size platform!
The micro Apex retains all the unique innovations of the original Apex such as zero arm slop/resonance, compressed-X arm geometry, and an optimized center of gravity.
This frame is capable of sub 250g flight and can be outfitted as a micro long-range rig or a freestyle ripper!
Only includes carbon, hardware, and accessories specified below.
We also carry the Micro Apex 3" Frame!
Check out the ImpulseRC Micro Apex Frames and Accessories Collection and our full range of ImpulseRC Gear! 


Features

Full crash damage warranty on all parts for 1 year
Perfect for Caddx Vista, 4K Tarsier or classic analog setup
Dual stack, 20x20 M3 and M2 centre, 20x20 M2 rear

Fits M2 9x9mm motors and M2 12x12mm motors
Injection moulded arm skids and front bumper
Injection moulded fitted wire guards to protect from prop strikes
Two battery pads included, 2mm rubber and ultra-light hook pad
4” frame weight 61g, carbon fibre + hardware
4mm thick arms, single shoulder bolt per arm

2mm thick upper and lower main plates
1.5mm thick top and camera plates

Includes
Carbon


1x Micro Apex Arm Key CF 3.5mm
1x Micro Apex Top Plate CF 1.5mm
1x Micro Apex Main Lower CF 2mm
1x Micro Apex Main Upper CF 2mm
2x Micro Apex Cam Side Plate CF 1.5mm
4x Micro Apex 4" Arm CF 4mm

Accessories


1x Micro Apex Hook LIPO pad - BLACK
1x Micro Apex LIPO pad - 2mm BLACK
1x Diamond File - Flat (Mini)
1x Diamond File - Round (Mini)
1x Lipo Strap - Small - ImpulseRC
1x Micro Apex Plastics Kit - BLACK
1x Micro Apex Arm Covers - BLACK - (4 Pack)

Hardware

(4x) M3x11mm Shoulder bolt - High Tensile Carbon Steel - Gunmetal
(4x) 3x10mm Cone Washer - Aluminium - Black
(4x) M3 Press Nut - Stainless Steel
(1x) M3x6mm Cap - High Tensile Carbon Steel - Gunmetal
(12x) M2.5x8mm Button - High Tensile Carbon Steel - Gunmetal
(16x) M2x6mm Cap - Stainless Steel
(16x) M2x8mm Cap - Stainless Steel
(4x) M3x10mm Countersunk Screw - Stainless Steel
(4x) M3x16mm Countersunk Screw - Stainless Steel
(4x) M2x18mm Countersunk Screw - Stainless Steel
(4x) M2 Lock Nut - Stainless Steel
(4x) M3 Lock Nut - Stainless Steel




The ImpulseRC Micro Apex 4" Frame Kit is available and waiting for you to fly it home. This uniquely built frame could be yours today. Order now from RaceDayQuads.

ImpulseRC Micro Apex 4" Frame Kit

ImpulseRC Micro Apex 4" Frame Kit For Sale At RaceDayQuads

Impulse RC

The infamous ImpulseRC Micro Apex 4" Frame Kit has been shrunk down into a micro-size platform! The micro Apex retains all the unique innovations of the original Apex such as zero arm slop/resonance, compressed-X arm geometry, and an optimized center of gravity. This frame is capable of sub 250g flight and can be outfi

ImpulseRC Micro Apex 4" Frame Kit from WREKD Co.

ImpulseRC Micro Apex 4

Propeller Size

The props work with the motors to lift your quad off the ground.  Choose a prop size that fits your frame.  Higher pitch props are efficient in fast environments and are less responsive in slow speeds. Lower pitch props are efficient in slower environments and are more responsive in slow speeds. Beginners should try various pitch props to see what works best for them. 

Propellers

Motor Stator Size

The motors spin with the propellers to lift your quad off the ground. If you’ve picked a frame already, we show you which motors are appropriate for your frame. Beginners can choose motors with a similar stator size that others have used for the frame you’ve selected. Alternatively, calculate the thrust required for a particular thrust-to-weight ratio and learn to read motor thrust tables to select the best motors for your needs. 

Motors

ESC Stack Mount

The ESC(s) controls your motors’ speed. It draws power from the battery to spin the motors based on what the FC tells it to do. Each motor needs an ESC. It’s common today to see 4-in-1 ESCs so you only need to buy a single part. For beginners, choose a 4-in-1 ESC that has a compatible mount with your frame and FC. The biggest consideration is amperage limit. We show you ESCs with appropriate amperage limits based on your frame size. You can calculate how much amperage you need based on your motor and prop choice. 

ESCs

FC Stack Mount

The FC is the brain or the CPU of your quad. It has a processor and other components that allow it to listen to your inputs and tells the quad what to do. FCs are commonly sold together with other components integrated or stacked (like ESCs and video transmitters). For beginners, choose a FC with a F4 or F7 processor that has a compatible mount with your frame. 

Flight Controllers

Camera Size

The FPV camera captures the image you see through the goggles. An FPV camera may be included with the VTX, particularly with digital VTXs. 