FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Continuous Amp Rating

Burst Amp Rating

Stator Width

Stator Length

Capacity (mAh)

C Rating

Propeller Pitch (in)

Propeller Length (in)

Weight (g)

Stator size

Propeller Length (Inches)

DJI Digital FPV Remote Controller


Features

Supports 2 Frequency Bands
Lighter, smaller, and more portable than previous versions.
DJI Assistant 2 allows easy updates of the firmware.
2 Flight Modes: Mode 1 or Mode 2

Specifications

Operating Frequencies: 2.400-2.4835 GHz/5.725-5.850 GHz
Max. Transmission Distance: 10 km (FCC), 6 km (CE), 6 km (SRRC), 6 km (MIC)
Gimbal Dimensions: 190×140×51 mm
Weight: 346 g
Battery Life: Approx. 9 hours
Charging Time: 2.5 hours
Control Latency: 7ms

Transmitter Power (EIRP): 2.400-2.4835 GHz

FCC: ≤ 28.5 dBm
CE: ≤ 20 dBm
SRRC: ≤ 20 dBm 
MIC: ≤ 20 dBm

Transmitter Power (EIRP): 5.725-5.850 GHz

FCC: ≤ 31.5 dBm
CE: ≤ 14 dBm
SRRC: ≤ 19 dBm

 
Note: If you use the DJI FPV Goggles and the DJI FPV Remote Controller 2 at the same time, you must first link the DJI FPV Drone and the goggles, and then link the remote controller.
Includes

1 x DJI FPV Remote Controller 2 w/ Battery

Recommended Acessories 


DJI O3 Air Unit

DJI FPV Goggles 2

DJI Avata Drone



Features Supports 2 Frequency Bands Lighter, smaller, and more portable than previous versions. DJI Assistant 2 allows easy updates of the firmware. 2 Flight Modes: Mode 1 or Mode 2 Specifications Operating Frequencies: 2.400-2.4835 GHz/5.725-5.850 GHz Max. Transmission Distance: 10 km (FCC), 6 km (CE), 6 km (SRRC), 6 

DJI FPV Remote Controller 2

Features Supports 2 Frequency Bands Lighter, smaller, and more portable than previous versions. DJI Assistant 2 allows easy updates of the firmware. 2 Flight Modes: Mode 1 or Mode 2 Specifications Operating Frequencies: 2.400-2.4835 GHz/5.725-5.850 GHz Max. Transmission Distance: 10 km (FCC), 6 km (CE), 6 km (SRRC), 6 km (MIC) Gimbal Dimensions: 190×140×51 mm Weight: 346 g Battery Life: Approx. 9 hours Charging Time: 2.5 hours Control Latency: 7ms Transmitter Power (EIRP): 2.400-2.4835 GHz FCC: ≤ 28.5 dBm CE: ≤ 20 dBm SRRC: ≤ 20 dBm  MIC: ≤ 20 dBm Transmitter Power (EIRP): 5.725-5.850 GHz FCC: ≤ 31.5 dBm CE: ≤ 14 dBm SRRC: ≤ 19 dBm   Note: If you use the DJI FPV Goggles and the DJI FPV Remote Controller 2 at the same time, you must first link the DJI FPV Drone and the goggles, and then link

Adopts an ergonomic design with Hall effect control sticks, which enables a better operating experience.Product Info:The DJI FPV Remote Controller 2 adopts an ergonomic design with Hall effect control sticks, which enables a better operating experience. DJI&#39s FPV Remote Controller 2 was made for racing and freestyle pilots. The updated DJI FPV Remote Controller 2 supports two frequency bands. It is also smaller and more portable than the previous models and adopts an ergonomic design that is more comfortable to hold.FeaturesSupports 2 Frequency BandsLighter, smaller, and more portable than previous versions.DJI Assistant 2 allows easy updates of the firmware.2 Flight Modes: Mode 1 or Mode 2SpecificationsOperating Frequencies: 2.400-2.4835 GHz/5.725-5.850 GHzMax. Transmission Distance: 10 km (FCC), 6 km (CE), 6 km (SRRC), 6 km (MIC)Dimensions (L×W×H): 190×140×51 mmWeight: 346 gOperating Time: Approx. 9 hoursCharging Time: Approx. 2.5 hoursC...

The best quality First Person View equipment. Free or discounted shipping on all orders.Drone Racing, RC Airplanes, FPV Cameras, FPV Goggles, Video Transmitters, RC Quads, Drone Antennas, Lipo Batteries, and Ground Station Equipment.All available for amateurs, schools, hobbyists, government, and wholesale buyers.

DJI FPV Remote Controller 2 - RMRC

At this time (3/3/2021), the DJI FPV Remote Controller 2 is not compatible with the DJI FPV AIr Unit or Caddx Vista.

DJI's FPV Remote Controller 2 was made for racing and freestyle pilots. The updated DJI FPV Remote Controller 2 supports two frequency bands. It is also smaller and more portable than the previous model and adopts an ergonomic design that is more comfortable to hold.
Features

Supports 2 Frequency Bands
Lighter, smaller, and more portable than previous versions.
DJI Assistant 2 allows easy updates of the firmware.
2 Flight Modes: Mode 1 or Mode 2

Specifications

Operating Frequencies: 2.400-2.4835 GHz/5.725-5.850 GHz
Max. Transmission Distance: 10 km (FCC), 6 km (CE), 6 km (SRRC), 6 km (MIC)
Gimbal Dimensions: 190&times140&times51 mm
Weight: 346 g
Battery Life: Approx. 9 hours
Charging Time: 2.5 hours
Control Latency: 7ms

Transmitter Power (EIRP): 2.400-2.4835 GHz

FCC: &le 28.5 dBm
CE: &le 20 dBm
SRRC: &le 20 dBm&nbsp
MIC: &le 20 dBm

Transmitter Power (EIRP):&nbsp5.725-5.850 GHz

FCC: &le 31.5 dBm
CE: &le 14 dBm
SRRC: &le 19 dBm


Note: If you use the DJI FPV Goggles and the DJI FPV Remote Controller 2 at the same time, you must first link the DJI FPV Drone and the goggles, and then link the remote controller.
Includes

1 x DJI FPV Remote Controller 2 w/ Battery


DJI's FPV Remote Controller 2 was made for racing and freestyle pilots. The updated DJI FPV Remote Controller 2 supports two frequency bands. It is also smaller and more portable than the previous model and adopts an ergonomic design that is more comfortable to hold.

DJI's FPV Remote Controller was made for racing and freestyle pilots. The added switches give more configuration options than previous DJI remote controllers. The DJI Remote syncs perfectly with the DJI FPV Air Unit for seamless integration into your drone builds.

With the DJI FPV Remote Controller, parameters of each component can be adjusted remotely. Purchasing the DJI FPV Goggles and the DJI FPV Air Unit eliminates the need of any additional receiver. Users can also enjoy 7ms ultra-low latency between the remote controller and the air unit.

Note: Using the DJI FPV Remote Controller is optional with the DJI Digital HD FPV system. The DJI Remote Controller is useful if you want to use their built-in Tx system.
Specifications
Weight: 765 g
Operation Frequency: 5.725-5.850 GHz
Max. Transmission Distance (Unobstructed,free of interference): FCC/SRRC: 4 km CE: 0.7 km
Transmitter Power (EIRP): FCC: &amplt30 dBm CE: &amplt14dBm SRRC:&amplt19dBm
Operation Current/Voltage: 0.6 A @ 7.6 V
Operation Temperature: 0° to 40°C (32° to 104°F)
Charging Temperature: 5° to 40°C (41° to 104°F)

Remote Controller Intelligent Battery
Battery Type: LiPo 2S
Capacity: 4920 mAh
Voltage: 7.6 V
Energy: 37.39 Wh

It is recommended to use the USB adapter of DJI Goggles RE, Ronin-S, Spark or an FCC/CE certified USB adapter that supports Quick Charge 2.0.
If you use the DJI FPV Goggles and the DJI FPV Remote Controller at the same time, you must first link the air unit and the goggles, and then link the remote controller.
Includes

 	1 x DJI FPV Remote Controller (includes battery)

DJI’s FPV Remote Controller was made for racing and freestyle pilots. The added switches give more configuration options than previous DJI remote controllers. The DJI Remote syncs perfectly with the DJI FPV Air Unit for seamless integration into your drone builds. With the DJI FPV Remote Controller, parameters of each component can be adjusted remotely. [...]

DJI FPV Remote Controller - GEPRC

DJI FPV Remote Controller

 DJI's FPV Remote Controller was made for racing and freestyle pilots. The added switches give more configuration options than previous DJI remote controllers. The DJI Remote syncs perfectly with the DJI FPV Air Unit for seamless integration into your drone builds. With the DJI FPV Remote Controller, parameters of each

DJI FPV Remote Controller (Mode 2)

About this product DJI&#x27s FPV Remote Controller 2 was made for racing and freestyle pilots. The updated DJI FPV Remote Controller 2 supports two frequency bands. It is also smaller and more portable than the previous model and adopts an ergonomic design that is more comfortable to hold. This controller works with the ne

About this product DJI's FPV Remote Controller 2 was made for racing and freestyle pilots. The updated DJI FPV Remote Controller 2 supports two frequency bands. It is also smaller and more portable than the previous model and adopts an ergonomic design that is more comfortable to hold. This controller works with the ne

<p><span style="color: #ff2a00"><strong>Except for DJI Air Unit, all other DJI products will be shipped within 7 days after payment.</strong></span></p>
<p> </p>
<ul>
<li>
<h2>Parameters can be set remotely.</h2>
</li>
<li>
<h2>Purchasing the DJI FPV Goggles and the DJI FPV Air Unit eliminates the need of any additional receiver.</h2>
</li>
<li>
<h2>7ms ultra-low latency.</h2>
</li>
<li>
<div class="temp-specs-tr">
<div class="temp-specs-td name">Overview</div>
<div class="temp-specs-td value">With the DJI FPV Remote Controller, parameters of each component can be adjusted remotely. Purchasing the DJI FPV Goggles and the DJI FPV Air Unit eliminates the need of any additional receiver. Users can also enjoy 7ms ultra-low latency between the remote controller and the air unit.<br>
</div>
</div>
<div class="temp-specs-tr">
<div class="temp-specs-td name">Tips</div>
<div class="temp-specs-td value">It is recommended to use the USB adapter of DJI Goggles RE, Ronin-S, Spark or an FCC/CE certified USB adapter that supports Quick Charge 2.0.<br>If you use the DJI FPV Goggles and the DJI FPV Remote Controller at the same time, you must first link the air unit and the goggles, and then link the remote controller.<br>
</div>
</div>
<div class="temp-specs-tr">
<div class="temp-specs-td name">In The Box</div>
<div class="temp-specs-td value">DJI FPV Remote Controller (including the battery) × 1<br>
</div>
</div>
<div class="temp-specs-tr">
<div class="temp-specs-td name">Specifications</div>
<div class="temp-specs-td value">Remote Controller<br>Weight: 765 g<br>Operation Frequency: 5.725-5.850 GHz<br>Max. Transmission Distance (Unobstructed,free of interference): FCC/SRRC: 4 km CE: 0.7 km<br>Transmitter Power (EIRP): FCC: &lt30 dBm CE: &lt14dBm SRRC:&lt19dBm<br>Operation Current/Voltage: 0.6 A @ 7.6 V<br>Operation Temperature: 0° to 40°C (32° to 104°F)<br>Charging Temperature: 5° to 40°C (41° to 104°F)<br><br>Remote Controller Intelligent Battery<br>Battery Type: LiPo 2S<br>Capacity: 4920 mAh<br>Voltage: 7.6 V<br>Energy: 37.39 Wh<br>
</div>
</div>
<div class="temp-specs-tr">
<div class="temp-specs-td name">Compatibility</div>
<div class="temp-specs-td value">DJI FPV Air Unit<br>DJI FPV Goggles</div>
</div>
</li>
</ul>

Parameters can be set remotely. Purchasing the DJI FPV Goggles and the DJI FPV Air Unit eliminates the need of any additional receiver.Participate in our game and get up to 20$ discount, 7ms ultra-low latency. Overview With the DJI FPV Remote Controller, parameters of each component can be adjusted remotely. Purchasing the DJI FPV Goggles and the DJI FPV Air Unit eliminates the need of any additional receiver. Users can also enjoy 7ms ultra-low latency between the remote controller and the air unit. Tips It is recommended to use the USB adapter of DJI Goggles RE, Ronin-S, Spark or an FCC/CE certified USB adapter that supports Quick Charge 2.0.If you use the DJI FPV Goggles and the DJI FPV Remote Controller at the same time, you must first link the air unit and the goggles, and then link the remote controller. In The Box DJI FPV Remote Controller (including the battery) × 1 Specifications Remote ControllerWeight: 765 gOperation Frequency: 5.725-5.850 GHzMax. Transmission Distance (Unobstructed,free of interference): FCC/SRRC: 4 km; CE: 0.7 kmTransmitter Power (EIRP): FCC: &lt;30 dBm; CE: &lt;14dBm; SRRC:&lt;19dBmOperation Current/Voltage: 0.6 A @ 7.6 VOperation Temperature: 0° to 40°C (32° to 104°F)Charging Temperature: 5° to 40°C (41° to 104°F)Remote Controller Intelligent BatteryBattery Type: LiPo 2SCapacity: 4920 mAhVoltage: 7.6 VEnergy: 37.39 Wh Compatibility DJI FPV Air UnitDJI FPV Goggles

DJI FPV Remote Controller – CADDX FPV

Except for DJI Air Unit, all other DJI products will be shipped within 7 days after payment.
 


Parameters can be set remotely.


Purchasing the DJI FPV Goggles and the DJI FPV Air Unit eliminates th

DJI's FPV Remote Controller 2 was made for racing and freestyle pilots. The updated DJI FPV Remote Controller 2 supports two frequency bands. It is also smaller and more portable than the previous model and adopts an ergonomic design that is more comfortable to hold. It now also supports the new DJI AVATA FPV drone.

DJI's FPV Remote Controller 2 was made for racing and freestyle pilots. The updated DJI FPV Remote Controller 2 supports two frequency bands. It is also smaller and more portable than the previous model and adopts an ergonomic design that is more com

DJI's FPV Remote Controller was made for racing and freestyle pilots. The added switches give more configuration options than previous DJI remote controllers.Parameters can be set remotely.Purchasing the DJI FPV Goggles and the DJI FPV Air Unit eliminates the need of any additional receiver.7ms ultra-low latency.GetFPV extended our returned policy on select DJI products to 30 days. Please see details here.&nbsp GetFPV Select Members&nbspgets an additional 15 days (total 45 days).

DJI's FPV Remote Controller was made for racing and freestyle pilots. The added switches give more configuration options than previous DJI remote controllers.

Parameters can be set remotely.
Purchasing the DJI FPV Goggles and the DJI FPV Air Unit

DJI's FPV Remote Controller 2 was made for racing and freestyle pilots. The updated DJI FPV Remote Controller 2 supports two frequency bands. It is also smaller and more portable than the previous model and adopts an ergonomic design that is more comfortable to hold. This controller works with the new DJI Avata Drone a

Radio Equipment

The radio is typically your first purchase. You control your quad using your radio which sends signals to your quad’s receiver. Beginner’s should choose an ELRS-compatible radio. Learn more about radios. 

Radio Transmitters and Modules

EMAX

EMAX E6 Transmitter Radio Controller - FrSky

Emax USA

EMAX E6 Transmitter compatible with Tinyhawk RTF replacement or for universal FrSky D8 protocol usage.18650 Battery Included.Micro USB Charging Cable not included.AETR1234 Channel Mapping

EMAX E6 Transmitter Radio Controller - FrSky D8 Mode Compatible from WREKD Co.

EMAX E6 Transmitter Radio Controller - FrSky D8 Mode Compatible

TBS Tracer Micro TX

Team Black Sheep

TBS TRACER MICRO TXIn a race, microseconds count. Goggles down, thumbs up - are you ready for a true 250Hz radio link? End to end latency: barely noticeable. Nothing else comes close! Thanks to 2.4GHz technology, we took the best from Crossfire and shrunk it down to speed it up. The end result: Smaller antennas, more speed, range for days.

Get the TBS Tracer MicroTX 2.4GHz Crossfire shipped fast from the best source for all your FPV gear, RMRC! Free shipping for qualified orders using the shipping deal. 

TBS Tracer MicroTX 2.4GHz Crossfire - RMRC

TBS Tracer Micro TX 2.4GHz Crossfire

Team BlackSheep

Tracer technology utilizes a 250Hz radio link sent through 2.4GHz technology which provides 3ms end to end latency - giving you the fastest radio link out there. Get range for days, faster connection, and best results with the TBS Tracer.

My Store

INTRODUCING TBS TRACER - 2.4GHZ "CROSSFIRE" RADIO SYSTEM
250Hz: Fastest available radio and telemetry link
Brand new 2.4GHz technology not found in any other radio link
3ms end to end latency
Crossfire engine for ultimate compatibility and functionality
"JR" and "LITE" form factor transmitters
Nano-sized receiver with antenna diversity
up to 50km range. enough for most.
For drones, planes, helicopters, cars and boats

THE FASTEST RADIO LINKIn a race, microseconds count. Goggles down, thumbs up - are you ready for a two-way 250Hz radio link? End to end latency: basically zero (okay, 3ms!). Range: for days. Nothing comes close! We took the best from Crossfire and shrunk it down &amp sped it up.NOT JUST FOR RACE AND "FREERANGE" PILOTSA single operation mode satisfies all requirements. A spine-tingling 250Hz refresh rate. Plenty of penetration and range to outperform even the most serious video link. Full telemetry capability is standard, without any range degradation! Thanks to Crossfire pedigree, drone pilots, traditional R/C pilots and everyone in between can instantly tap into the familiar lineup of compatible software, devices, remotes and mounting boards.EASE OF USEOTA firmware updates, auto-bind, multi-bind, LUA device configuration such as flight controller PIDs, etc. and cloud connectivity: No problem! These are all features that TBS first brought into the R/C space with TBS Crossfire! All receivers arrive in binding mode and it remembers your bind across all of your radios, so the bind button is technically not needed ever.UNDER THE HOODTBS Tracer runs on the Crossfire engine. Over 6 years of active development and by far the most popular R/C system for FPV enthusiasts! You instantly tap into the same reliability, features and compatibility that drone pilots see as synonymous to peace of mind. So what's the difference? Higher update rate, lower latency, smaller antennas due to higher frequency. Crossfire users will feel right at home!THE TBS GUARANTEEIn our over 10 years of our existence, software updates have always been free, continuous and plenty. Hardware is built for longevity and comes packed with a great range of features that are yet to be unlocked. Support has always been laser-focused on customer satisfaction. For pilots, by pilots.It is the reason why TBS products have the largest following, and why investment into TBS Tracer will continue to pay dividends in future - just like TBS Crossfire continues to do for all hobbyists. As a thank you from us for your support, visit our website and enter the serial number of your Crossfire as Coupon Code for 30% OFF on all TBS Tracer TX &amp RX products!FEATURES:
Long range, adaptive and robust remote control system for your drone &amp aircraft
Low latency, 250Hz update rate (5x faster than typical - world's fastest) for mind-blowing accuracy
Two-way communication link with real-time link vitals and telemetry
OTA firwmare updates, auto-bind, multi-bind support
TBS Cloud connectivity with telemetry output for smartphone apps
Fully configurable by OpenTX and TBS TANGO remote using CRSF protocol
"Unlimited" amout of people can fly at the same time
Selectable RF power from 25mW to 1W (local restrictions apply)
8 or 12ch output via CRSF, SBUS, inverted SBUS or PPM
Serial Modem capable of transmitting MAVLink or other serial protocols (up &amp downlink)

INCLUDES
1 x TBS Tracer Micro TX

TBS TRACER MICRO TX LITE SPECIFICATIONS:

Latency &amp Refresh Rate: 3ms, 250Hz

Output power: 25mW / 100mW / 250mW* / 500mW* / 1000mW*

Frequency Bands: 2.4GHz ISM

Input Voltage: 3.5 - 13V

Connector: USB-C

Power consumption: 1.1W (@10mW) - 2W (@100mW)

Dimensions: 65 x 48 x 22 mm (JR module size)

Radio Compatibility: JR module bay (e.g. TBS Tango 1, RadioMaster TX16S, Taranis X9D. OpenTX V2.1+

* output power modes may not be available due to local regulation limitations Listed with ExportYourStore.com

INTRODUCING TBS TRACER - 2.4GHZ "CROSSFIRE" RADIO SYSTEM 250Hz: Fastest available radio and telemetry link Brand new 2.4GHz technology not found in any other radio link 3ms end to end latency Crossfire engine for ultimate compatibility and functionality "JR" and "LITE" form factor transmitters Nano-sized receiver with 

TBS TRACER MICRO TX

In a race, microseconds count. Goggles down, thumbs up - are you ready for a true 250Hz radio link? End to end latency: barely noticeable. Nothing else comes close! Thanks to 2.4GHz technology, we took the best from Crossfire and shrunk it down to speed it up. The end result: Smaller antennas, more speed, range for day

Team Blacksheep TBS Tracer Micro 2.4GHz TX


TBS TRACER MICRO TX


In a race, microseconds count. Goggles down, thumbs up - are you ready for a true 250Hz radio link? End to end latency: barely noticeable. Nothing else comes close! Thanks to 2.4GHz technology, we took the best from Crossfire and shrunk it down to speed it up. The end result: Smaller antennas, more speed, range for days.





TBS TRACER MICRO TX FEATURES:

250Hz: Fastest available radio and telemetry link.
Next generation 2.4GHz technology meets robust Crossfire radio engine
3ms end to end latency
"JR" and "LITE" form factor transmitters
Nano-sized receiver with antenna diversity
15mi+/25km+ range
For drones, planes, helicopters, cars and boats 


TBS TRACER MICRO TX SPECIFICATIONS:


Latency &amp Refresh Rate: 3ms, 250Hz

Output power: 25mW / 100mW

Frequency Bands: 2.4GHz ISM

Input Voltage: 5 - 13V

Connector: USB-C

Power consumption: 1.1W (@10mW) - 2W (@100mW)

Dimensions: 65 x 48 x 22 mm (JR module size)

Radio Compatibility: JR module bay (e.g. TBS Tango 1, RadioMaster TX16S, Taranis X9D). OpenTX V2.1+

* output power modes may not be available due to local regulation limitations








TBS TRACER MICRO TX In a race, microseconds count. Goggles down, thumbs up - are you ready for a true 250Hz radio link? End to end latency: barely noticeable. Nothing else comes close! Thanks to 2.4GHz technology, we took the best from Crossfire and shrunk it down to speed it up. The end result: Smaller antennas, more 

In a race, microseconds count. Goggles down, thumbs up - are you ready for a true 250Hz radio link? End-to-end latency: barely noticeable. Nothing else comes close! Thanks to 2.4GHz technology, we took the best from Crossfire and shrunk it down to speed it up. The end result: Smaller antennas, more speed, and range for days.
This is a perfect match for the Tracer Nano receiver
Features

250Hz: Fastest available radio and telemetry link

Brand new 2.4GHz technology not found in any other radio link

3ms end-to-end latency

Crossfire engine for ultimate compatibility and functionality

For JR form factor transmitters

Nano-sized receiver with antenna diversity

15mi+/25km+ range

For drones, planes, helicopters, cars, and boats

Specifications

Latency &amp Refresh Rate: 3ms, 250Hz

Output power: 25mW / 100mW

Frequency Bands: 2.4GHz ISM

Input Voltage: 5V - 3V

Connector: USB-C

Power consumption: 1.1W (@10mW) - 2W (@100mW)

Dimensions: 65 x 48 x 22 mm (JR module size)

Radio Compatibility: JR module bay (e.g. TBS Tango 1, RadioMaster TX16S, Taranis X9D). OpenTX V2.1+


Includes

1x Tracer 100mW 2.4GHz Micro TX Module
1x Antenna


In a race, microseconds count. Goggles down, thumbs up - are you ready for a true 250Hz radio link? End-to-end latency: barely noticeable. Nothing else comes close! Thanks to 2.4GHz technology, we took the best from Crossfire and shrunk it down to speed it up. The end result: Smaller antennas, more speed, and range for days.

Tracer 100mW 2.4GHz Micro TX Module

In a race, microseconds count. Goggles down, thumbs up - are you ready for a true 250Hz radio link? End-to-end latency: barely noticeable. Nothing else comes close! Thanks to 2.4GHz technology, we took the best from Crossfire and shrunk it down to speed it up. The end result: Smaller antennas, more speed, and range for days. This is a perfect match for the Tracer Nano receiver Features 250Hz: Fastest available radio and telemetry link Brand new 2.4GHz technology not found in any other radio link 3ms end-to-end latency Crossfire engine for ultimate compatibility and functionality For JR form factor transmitters Nano-sized receiver with antenna diversity 15mi+/25km+ range For drones, planes, helicopters, cars, and boats Specifications Latency &amp; Refresh Rate: 3ms, 250Hz Output power: 25mW / 100mW Frequency Bands: 2.4GHz ISM Input Voltage: 5V - 3V Connector: USB-C Power consumption: 1.1W

RadioMaster

RadioMaster Boxer EdgeTX Radio Transmitter

HOBBYPORTER

The perfect combination of size and ergonomics make the Boxer an ideal choice for pilots on the go. Featuring full-size hall gimbals for precision control and an intuitive button layout, the Boxer gives you a compact radio without compromising on comfort and function. This version comes with a transparent case and a bonus white LED kit for your gimbles, a great combo for a classy looking transmitter. 
Check out our RadioMaster collection and all our RC transmitters! 
Features

Transparent case
LED gimbal lights kit included (not installed)
Elevate your control
ExpressLRS 30dBm/1W max
Max F-1000 Refresh rate
Preinstalled with EDGETX firmware
Compact design with excellent ergonomics
Full sized V4.0 hall effect gimbles
Radiomaster standardized button layout
Space for a 2S 6500mAH pack, literally fly all day! 



Specifications


Item: Boxer Radio
Size: 235x178x77
Weight: 532.5g
Frequency: 2.400GHz - 2.480GHz
Internal RF: ELRS 2.4GHz
Supported protocols: Module dependent
Transmitter Power: Express: Max 30dBm (International) / 20dBm (EU LBT)
Cooling fan: Built in
Voltage Range: 6.6-8.4V DC
Radio Firmware: EdgeTX (Transmitter) / ELRS (RF module)
Channels: Max 16 channels (Receiver dependent)
Battery: 7.4V 2-Cell Lithium Polymer / Two 3.7V 18650 Lithium-Ion cells (Battery not included)
Display: 128x64 Monochrome LCD display
Gimbal: High precision 4.0 Hall gimbals as standard
Upgrade Method: USB / SD card &amp EdgeTX Companion PC software
Bonus: White gimbal LED set included for optional installation

Includes

1x RadioMaster Boxer EdgeTX RC Transmitter - ExpressLRS 2.4GHz (Transparent)
1x Signature carry case
1x T antenna
1x USB-C cable
1x Gimble protector
1x 1.5mm Allen key
2x M4x4 Screws
4x Low tension springs
1x Stickers
1x Manuals
1x White gimbal LED set
1x 18650 battery tray 


The perfect combination of size and ergonomics make the Boxer an ideal choice for pilots on the go. Featuring full-size hall gimbals for precision control and an intuitive button layout, the Boxer gives you a compact radio without compromising on comfort and function. This version comes with a transparent case and a bo

RadioMaster Boxer EdgeTX RC Transmitter - ELRS 2.4GHz - Transparent

The RadioMaster Boxer Radio Transmitter is compact, ergonomic, and powerful. Available in 4-in-1 Multi-Protocol, CC2500, or ELRS 2.4GHz options.

RadioMaster Boxer Radio Transmitter - 4-in-1 Multi-Protocol/CC2500/ELRS 2.4GHz

The perfect combination of size and ergonomics make the Boxer an ideal choice for pilots on the go. Featuring full-size hall gimbals for precision control and an intuitive button layout, the Boxer gives you a compact radio without compromising on comfort and function.  


EdgeTX Operating System
Preinstalled with EdgeTX, the Boxer has cutting-edge software fit for its class-leading hardware. RadioMaster works closely with the EdgeTX team to develop features and optimize the user experience. We will continue to contribute and support projects like EdgeTX, ensuring the concepts of open standards are carried forward.
Features

Available with built-in ExpressLRS or 4-in-1/CC2500 MPM RF modules
Featuring a powerful STM32VGT6 processor with 1MB RAM
Preinstalled EdgeTX firmware
Internal ELRS module capable of 1,000Hz refresh rate
Adjustable ELRS RF output (30dBm max FCC or 20dBm Max EU LBT)
4-in-1 or CC2500-only version capable of up to 20dBm RF output
QC3.0 fast charging support 2.0A MAX
Compact design with excellent ergonomics
New low-profile latching SE switch and momentary SF switch
Oversized battery compartment- Space for a 2S 6200mAh pack, up to 20 hours duration (Batteries not included)
Full-sized V4.0 Hall effect gimbals as standard, upgradable to AG01 CNC Hall effect gimbals
Standard JR module compartment
Internal module cooling fan built in (ELRS version)
RadioMaster standardized button layout
Versatile 6-position switch for flight mode access
Adjustable and Removable T-shape Antenna
Industry-first fabric handle for improved portability
Changeable, ergonomic grips
Redesigned SD card slot with pre-loaded SD card included
External module power slots in the battery cover
RadioMaster signature carry case and gimbal protector are included as standard to ensure your radio stays safe while on the move


Available with ExpressLRS and 4in1/CC2500 Version
In addition to the popular internal 4-in-1 Multi-module (CC2500, NRF24L01, A7105 and CYRF6936) and the CC2500-only version, the Boxer is now also available with a high-power, fan-cooled, 1W internal 2.4GHz ExpressLRS (ELRS) module. Designed to provide reliable long-distance control, minimal latency, and high refresh rates. ELRS is a revolutionary open-source protocol taking the R/C industry by storm.

Powerful STM32VGT6 Processor with 1MB RAM

Compact Design with Excellent Ergonomics











Radio Overview

Specification

Item: Boxer Radio
Size: 235x178x77mm
Weight: 532.5g
Frequency: 2.400GHz-2.480GHz
Internal RF Options: CC2500 multi-protocol / 4-in-1 multi-protocol / ELRS 2.4GHz
Supported protocols: Module dependent
Transmitting Power CC2500 and 4IN1: Max 20dBm
Transmitting Power ExpressLRS: Max 30dBm (international) / Max 20dBm (EU LBT)
Cooling fan: Built-in (ELRS version)
Voltage Range: 6.6-8.4V DC
Radio Firmware: EdgeTX (Transmitter) / Multi-Module (RF module) / ELRS
Channels: Max 16 channels (Receiver dependent)
Battery: 7.4V 2-cell Lithium-Polymer / Two 3.7V 18650 Lithium-Ion cells (batteries not included)
Display: 128x64 Monochrome LCD display
Gimbal: High precision 4.0 Hall gimbals as standard (AG01 Optional)
External module: JR/FrSKY/Crossfire compatible
Upgrade Method: USB/SD card &ampamp EdgeTX Companion PC software

Includes

1x RadioMaster Boxer Radio
1x Signature Carry Case
1x T Antenna
1x USB-C Cable
1x Gimbal Protector
1x 1.5mm Allen Key
2x M4x4 Screws
4x Low Tension Springs
1x 18650 Battery Tray
1x Stickers
1x Manual

Download

Boxer Radio User Manual

 

The perfect combination of size and ergonomics make the Boxer an ideal choice for pilots on the go. Featuring full-size hall gimbals for precision control and an intuitive button layout, the Boxer gives you a compact radio without compromising on comfort and function.   EdgeTX Operating System Preinstalled with EdgeTX,

RadioMaster Boxer EdgeTX RC Transmitter - Choose Version from WREKD Co.

RadioMaster Boxer EdgeTX RC Transmitter - Choose Version

Five33


The popular Boxer radio is now available in a Transparent Edition—an electrifying fusion of style and performance that is sure to set the RC community ablaze! Unleash the perfect balance of sleek design and high durability, all wrapped up in a premium transparent package. Prepare to be mesmerized with the bonus White LED kit included allowing you to customize the look of your radio even further! We have even included a bonus neck strap to complete the set with style and comfort!


The two 18650 batteries required to power the radio are sold separately 

LAUNCH VIDEO
 

 
FEATURES:

Special transparent version radio with white Gimbal LED set and RadioMaster Neck Strap included
You can DIY your personalized and unique radio anytime
Available with built-in ExpressLRS RF modules
Featuring a powerful STM32F407VGT6 with 1MB Flash and 192KB RAM
Preinstalled EdgeTX firmware
Internal ELRS module capable of 1,000Hz refresh rate
Adjustable ELRS RF output (30dBm max FCC or 20dBm Max EU LBT)
QC3.0 fast charging support 2.0A MAX
Compact design with excellent ergonomics
New low-profile latching SE switch and momentary SF switch
Oversized battery compartment- Space for a 2S 6200mAh pack, up to 20-hour duration (Batteries not included)
Full sized V4.0 Hall effect gimbals as standard, upgradable to AG01 CNC Hall effect gimbals
Standard JR module compartment
Internal module cooling fan built in (ELRS version)
RadioMaster standardized button layout
Versatile 6-position switch for flight mode access
Adjustable and Removable T-shape Antenna
Industry first fabric handle for improved portability
Changeable, ergonomic grips
Redesigned SD card slot with pre-loaded SD card included
External module power slots in battery cover
RadioMaster signature carry case and gimbal protector are included as standard to ensure your radio stays safe while on the move


SPECIFICATIONS

Item: BOXER Radio Transparent Version
Size: 235*178*77mm
Weight: 532.5g
Frequency: 2.400GHz-2.480GHz
Internal RF: ELRS 2.4GHz
Supported protocols: Module dependent
Transmitting Power: ExpressLRS: Max 30dBm (international) / Max 20dBm (EU LBT)
Cooling fan: Built in (ELRS version)
Voltage Range: 6.6-8.4V DC
Radio Firmware: EdgeTX (Transmitter) / ELRS (RF module)
Channels: Max 16 channels (Receiver dependent)
Battery: 7.4V 2-cell Lithium-Polymer / Two 3.7V 18650 Lithium-Ion cells (batteries not included)
Display: 128*64 Monochrome LCD display
Gimbal: High precision 4.0 Hall gimbals as standard (AG01 Optional)
External module: JR / FrSKY / Crossfire compatible
Upgrade Method: USB / SD card &amp EdgeTX Companion PC software
BONUS: White Gimbal LED set included but not installed
BONUS: Radiomaster neck strap

EDGETX OPERATING SYSTEM AND EXPRESSLRS RF SYSTEM PRE-INSTALLED
Preinstalled with EdgeTX and ExpressLRS, the BOXER has cutting edge software fit for its class-leading hardware. RadioMaster works closely with the EdgeTX and ExpressLRS teams to develop features and optimize the user experience. We will continue to contribute and support projects like EdgeTX and ExpressLRS, ensuring the concepts of open standards are carried forward into the future.


PACKAGE INCLUDES:

1 * BOXER Radio Transparent Version
1 * Signature Carry Case
1 * T Antenna
1 * USB-C Cable
1 * Gimbal Protector
1 * 1.5mm Allen Key
2 * M4*4 Screws
4 * Low Tension Springs
1 * Stickers
1 * Manual
1 * White Gimbal LED set (ready to install)
1 * 18650 Battery tray (Batteries not included)
1 * RadioMaster Neck Strap for Transmitter





The popular Boxer radio is now available in a Transparent Edition—an electrifying fusion of style and performance that is sure to set the RC community ablaze! Unleash the perfect balance of sleek design and high durability, all wrapped up in a premium transparent package. Prepare to be mesmerized with the bonus White L

RADIOMASTER BOXER EDGETX RC RADIO TRANSMITTER TRANSPARENT VERSION - ELRS

The RadioMaster Boxer Radio Transmitter is compact, ergonomic, and powerful. Now in Transparent!

 RadioMaster Boxer Radio Transmitter w/ LEDs - ELRS 2.4GHz M2 (Transparent)

The perfect combination of size and ergonomics make the BOXER an ideal choice for pilots on the go. Featuring full size hall gimbals for precision control and an intuitive button layout, the BOXER gives you a compact radio without compromising on comfort and function. Elevate your RC experience to new heights with the Boxer Radio Controller from Radiomaster RC. Designed to meet the demands of professional RC enthusiasts, this state-of-the-art transmitter combines advanced features, exceptional performance, and precise control, making it an essential tool for hobbyists and experts alike.The Boxer Radio Controller is engineered to deliver unparalleled reliability and an immersive user experience. Equipped with cutting-edge technology, it ensures seamless communication with your RC models, providing swift and accurate commands for precise maneuverability. Take full control of your aircraft, drone, or other RC vehicles with ease and confidence.Featuring an ergonomic design, ...

RadioMaster Boxer Radio Control System ExpressLRS  - RMRC

RadioMaster Boxer Radio Control System ExpressLRS (ELRS 2.4G)

RadioMaster Boxer EdgeTX RC Radio Transmitter Transparent Version - ELRS

The perfect combination of size and ergonomics make the BOXER an ideal choice for pilots on the go. Featuring full size hall gimbals for precision control and an intuitive button layout, the BOXER gives you a compact radio without compromising on comfort and function.  The two 18650 batteries required to power the radi

RadioMaster Boxer EdgeTX RC Radio Transmitter - Choose Version

The perfect combination of size and ergonomics make the Boxer an ideal choice for pilots on the go. Featuring full-size hall gimbals for precision control and an intuitive button layout, the Boxer gives you a compact radio without compromising on comfort and function. This version comes with a transparent case and a bonus white LED kit for your gimbles, a great combo for a classy looking transmitter. 
Check out our RadioMaster collection and all our RC transmitters! 
Features

Transparent case
LED gimbal lights kit included (not installed)
Elevate your control
ExpressLRS 30dBm/1W max
Max F-1000 Refresh rate
Preinstalled with EDGETX firmware
Compact design with excellent ergonomics
Full sized V4.0 hall effect gimbles
Radiomaster standardized button layout
Space for a 2S 6500mAH pack, literally fly all day! 



Specifications


Item: Boxer Radio
Size: 235x178x77
Weight: 532.5g
Frequency: 2.400GHz - 2.480GHz
Internal RF: ELRS 2.4GHz
Supported protocols: Module dependent
Transmitter Power: Express: Max 30dBm (International) / 20dBm (EU LBT)
Cooling fan: Built in
Voltage Range: 6.6-8.4V DC
Radio Firmware: EdgeTX (Transmitter) / ELRS (RF module)
Channels: Max 16 channels (Receiver dependent)
Battery: 7.4V 2-Cell Lithium Polymer / Two 3.7V 18650 Lithium-Ion cells (Battery not included)
Display: 128x64 Monochrome LCD display
Gimbal: High precision 4.0 Hall gimbals as standard
Upgrade Method: USB / SD card &ampamp EdgeTX Companion PC software
Bonus: White gimbal LED set included for optional installation

Includes

1x RadioMaster Boxer EdgeTX RC Transmitter - ExpressLRS 2.4GHz (Transparent)
1x Signature carry case
1x T antenna
1x USB-C cable
1x Gimble protector
1x 1.5mm Allen key
2x M4x4 Screws
4x Low tension springs
1x Stickers
1x Manuals
1x White gimbal LED set
1x 18650 battery tray 


RadioMaster Boxer EdgeTX RC Transmitter - ELRS 2.4GHz - Transparent from WREKD Co.

The perfect combination of size and ergonomics make the BOXER an ideal choice for pilots on the go. Featuring full size hall gimbals for precision control and an intuitive button layout, the BOXER gives you a compact radio without compromising on comfort and function.The two 18650 batteries required to power the radio are sold separatelyLAUNCH VIDEOFEATURES
Available with built-in ExpressLRS or 4-in-1 MPM RF modules
Featuring a powerful STM32VGT6 processor with 1MB RAM
Preinstalled EdgeTX firmware
Internal ELRS module capable of 1,000Hz refresh rate
Adjustable ELRS RF output (30dBm max FCC or 20dBm Max EU LBT)
4-in-1 version capable of up to 20dBm RF output
QC3.0 fast charging support 2.0A MAX
Compact design with excellent ergonomics
New low-profile latching SE switch and momentary SF switch
Oversized battery compartment- Space for a 2S 6200mAh pack, up to 20-hour duration (Batteries not included)
Full sized V4.0 Hall effect gimbals as standard, upgradable to AG01 CNC Hall effect gimbals
Standard JR module compartment
Internal module cooling fan built in (ELRS version)
RadioMaster standardized button layout
Versatile 6-position switch for flight mode access
Adjustable and Removable T-shape Antenna
Industry first fabric handle for improved portability
Changeable, ergonomic grips
Redesigned SD card slot with pre-loaded SD card included
External module power slots in battery cover
RadioMaster signature carry case and gimbal protector are included as standard to ensure your radio stays safe while on the move

SPECIFICATION
Item: BOXER Radio
Size: 235*178*77mm
Weight: 532.5g
Frequency: 2.400GHz-2.480GHz
Internal RF Options: 4-in-1 multi-protocol / ELRS 2.4GHz
Supported protocols: Module dependent
Transmitting Power CC2500 and 4IN1: Max 20dBm
Transmitting Power ExpressLRS: Max 30dBm (international) / Max 20dBm (EU LBT)
Cooling fan: Built in (ELRS version)
Voltage Range: 6.6-8.4V DC
Radio Firmware: EdgeTX (Transmitter) / Multi-Module (RF module) / ELRS
Channels: Max 16 channels (Receiver dependent)
Battery: 7.4V 2-cell Lithium-Polymer / Two 3.7V 18650 Lithium-Ion cells (batteries not included)
Display: 128*64 Monochrome LCD display
Gimbal: High precision 4.0 Hall gimbals as standard (AG01 Optional)
External module: JR/FrSKY/Crossfire compatible
Upgrade Method: USB/SD card &amp EdgeTX Companion PC software

EDGETX OPERATING SYSTEMPreinstalled with EdgeTX, the BOXER has cutting edge software fit for its class-leading hardware. RadioMaster works closely with the EdgeTX team to develop features and optimize the user experience. We will continue to contribute and support projects like EdgeTX, ensuring the concepts of open standards are carried forward.AVAILABLE WITH EXPRESSLRS AND 4IN1 VERSIONIn addition to the popular internal 4-in-1 Multi-module (CC2500, NRF24L01, A7105 and CYRF6936), the BOXER is now also available with a high-power, fan cooled, 1W internal 2.4GHz ExpressLRS (ELRS) module. Designed to provide reliable long-distance control, minimal latency, and high refresh rates. ELRS is a revolutionary open-source protocol taking the R/C industry by storm.FCC VERSION AND EU LBT VERSION ARE AVAILABLECurrently, we provide the standard FCC version and the EU LBT version. Please check the supported protocols below.Standard FCC Version
4in1 (FCC) Version supports all MPM protocols
ELRS (FCC) is pre-installed witn ExpressLRS ISM FW (Max power is hardware dependant)

EU LBT Version
4in1 LBT Version (Europe) is limited to LBT compliant protocols FrSKY X/X2 LBT, HoTT LBT and DSMX
ELRS LBT (Europe) Version is pre-installed with ExpressLRS CE EU domain LBT FW (Limited to 100mw power output)


POWERFUL STM32VGT6 PROCESSOR WITH 1MB RAMCOMPACT DESIGN WITH EXCELLENT ERGONOMICSRADIO OVERVIEWPACKAGE INCLUDES
1 * RadioMaster Boxer EdgeTX RC Radio Transmitter - Chosen Version
1 * Signature Carry Case
1 * T Antenna
1 * USB-C Cable
1 * Gimbal Protector
1 * 1.5mm Allen Key
2 * M4*4 Screws
4 * Low Tension Springs
1 * 18650 Battery Tray
1 * Stickers
1 * Manual

 Listed with ExportYourStore.com

The perfect combination of size and ergonomics make the BOXER an ideal choice for pilots on the go. Featuring full size hall gimbals for precision control and an intuitive button layout, the BOXER gives you a compact radio without compromising on comfort and function.The two 18650 batteries required to power the radio 

RADIOMASTER BOXER EDGETX RC RADIO TRANSMITTER - ELRS

The perfect combination of size and ergonomics make the BOXER an ideal choice for pilots on the go. Featuring full size hall gimbals for precision control and an intuitive button layout, the BOXER gives you a compact radio without compromising on comfort and function. 
 

Features

Available with built-in ExpressLRS or 4-in-1/CC2500 MPM RF modules
Featuring a powerful STM32VGT6 processor with 1MB RAM
Preinstalled EdgeTX firmware
Internal ELRS module capable of 1,000Hz refresh rate
Adjustable ELRS RF output (30dBm max FCC or 20dBm Max EU LBT)
4-in-1 or CC2500 only version capable of up to 20dBm RF output
QC3.0 fast charging support 2.0A MAX
Compact design with excellent ergonomics
New low-profile latching SE switch and momentary SF switch
Oversized battery compartment- Space for a 2S 6200mAh pack, up to 20-hour duration (Batteries not included)
Full sized V4.0 Hall effect gimbals as standard, upgradable to AG01 CNC Hall effect gimbals
Standard JR module compartment
Internal module cooling fan built in (ELRS version)
RadioMaster standardized button layout
Versatile 6-position switch for flight mode access
Adjustable and Removable T-shape Antenna
Industry first fabric handle for improved portability
Changeable, ergonomic grips
Redesigned SD card slot with pre-loaded SD card included
External module power slots in battery cover
RadioMaster signature carry case and gimbal protector are included as standard to ensure your radio stays safe while on the move


Specifications

Frequency: 2.400GHz-2.480GHz

Internal RF Options: 4-in-1 multi-protocol / ELRS 2.4GHz
Supported protocols: Module dependent
Transmitting Power CC2500 and 4IN1: Max 20dBm
Transmitting Power ExpressLRS: Max 30dBm (international) / Max 20dBm (EU LBT)
Cooling fan: Built in (ELRS version)
Voltage Range: 6.6-8.4V DC
Radio Firmware: EdgeTX (Transmitter) / Multi-Module (RF module) / ELRS
Channels: Max 16 channels (Receiver dependent)
Battery: 7.4V 2-cell Lithium-Polymer / Two 3.7V 18650 Lithium-Ion cells (batteries not included)
Display: 128*64 Monochrome LCD display
Gimbal: High precision 4.0 Hall gimbals as standard (AG01 Optional)
External module: JR/FrSKY/Crossfire compatible
Upgrade Method: USB/SD card &amp EdgeTX Companion PC software
Size: 235*178*77mm
Weight: 532.5g

Download Manual Here




Includes

1x Boxer EdgeTX Radio Controller - 4in1 or ELRS
1x Signature Carry Case
1x T Antenna
1x USB-C Cable
1x Gimbal Protector
1x 1.5mm Allen Key
2x M4*4 Screws
4x Low Tension Springs
1x 18650 Battery Tray
1x Stickers
1x Manual





The perfect combination of size and ergonomics make the BOXER an ideal choice for pilots on the go. Featuring full size hall gimbals for precision control and an intuitive button layout, the BOXER gives you a compact radio without compromising on comfort and function.    Features Available with built-in ExpressLRS or 4

Boxer EdgeTX Radio Controller - 4in1 or ELRS

The perfect combination of size and ergonomics make the BOXER an ideal choice for pilots on the go. Featuring full size hall gimbals for precision control and an intuitive button layout, the BOXER gives you a compact radio without compromising on comfort and function.    Features Available with built-in ExpressLRS or 4-in-1/CC2500 MPM RF modules Featuring a powerful STM32VGT6 processor with 1MB RAM Preinstalled EdgeTX firmware Internal ELRS module capable of 1,000Hz refresh rate Adjustable ELRS RF output (30dBm max FCC or 20dBm Max EU LBT) 4-in-1 or CC2500 only version capable of up to 20dBm RF output QC3.0 fast charging support 2.0A MAX Compact design with excellent ergonomics New low-profile latching SE switch and momentary SF switch Oversized battery compartment- Space for a 2S 6200mAh pack, up to 20-hour duration (Batteries not included) Full sized V4.0 Hall effect gimbals

Experience unmatched control and reliability with the Boxer Radio Controller M2 from Radiomaster RC. Designed for professional RC enthusiasts, this cutting-edge transmitter delivers superior performance, enhanced precision, and intuitive operation. Explore the variant options and unleash the full potential of your RC adventures.The perfect combination of size and ergonomics make the BOXER an ideal choice for pilots on the go. Featuring full size hall gimbals for precision control and an intuitive button layout, the BOXER gives you a compact radio without compromising on comfort and function. Elevate your RC experience to new heights with the Boxer Radio Controller from Radiomaster RC. Designed to meet the demands of professional RC enthusiasts, this state-of-the-art transmitter combines advanced features, exceptional performance, and precise control, making it an essential tool for hobbyists and experts alike.The Boxer Radio Controller is engineered to deliver unparallel...

RadioMaster Boxer Transmitter 4-in-1 Radio Controller Mode 2 - RMRC

RadioMaster Boxer Transmitter 4-in-1 Radio Controller

The perfect combination of size and ergonomics make the Boxer an ideal choice for pilots on the go. Featuring full-size hall gimbals for precision control and an intuitive button layout, the Boxer gives you a compact radio without compromising on comfort and function.  


EdgeTX Operating System
Preinstalled with EdgeTX, the Boxer has cutting-edge software fit for its class-leading hardware. RadioMaster works closely with the EdgeTX team to develop features and optimize the user experience. We will continue to contribute and support projects like EdgeTX, ensuring the concepts of open standards are carried forward.
Features

Available with built-in ExpressLRS or 4-in-1/CC2500 MPM RF modules
Featuring a powerful STM32VGT6 processor with 1MB RAM
Preinstalled EdgeTX firmware
Internal ELRS module capable of 1,000Hz refresh rate
Adjustable ELRS RF output (30dBm max FCC or 20dBm Max EU LBT)
4-in-1 or CC2500-only version capable of up to 20dBm RF output
QC3.0 fast charging support 2.0A MAX
Compact design with excellent ergonomics
New low-profile latching SE switch and momentary SF switch
Oversized battery compartment- Space for a 2S 6200mAh pack, up to 20 hours duration (Batteries not included)
Full-sized V4.0 Hall effect gimbals as standard, upgradable to AG01 CNC Hall effect gimbals
Standard JR module compartment
Internal module cooling fan built in (ELRS version)
RadioMaster standardized button layout
Versatile 6-position switch for flight mode access
Adjustable and Removable T-shape Antenna
Industry-first fabric handle for improved portability
Changeable, ergonomic grips
Redesigned SD card slot with pre-loaded SD card included
External module power slots in the battery cover
RadioMaster signature carry case and gimbal protector are included as standard to ensure your radio stays safe while on the move


Available with ExpressLRS and 4in1/CC2500 Version
In addition to the popular internal 4-in-1 Multi-module (CC2500, NRF24L01, A7105 and CYRF6936) and the CC2500-only version, the Boxer is now also available with a high-power, fan-cooled, 1W internal 2.4GHz ExpressLRS (ELRS) module. Designed to provide reliable long-distance control, minimal latency, and high refresh rates. ELRS is a revolutionary open-source protocol taking the R/C industry by storm.

Powerful STM32VGT6 Processor with 1MB RAM

Compact Design with Excellent Ergonomics











Radio Overview

Specification

Item: Boxer Radio
Size: 235x178x77mm
Weight: 532.5g
Frequency: 2.400GHz-2.480GHz
Internal RF Options: CC2500 multi-protocol / 4-in-1 multi-protocol / ELRS 2.4GHz
Supported protocols: Module dependent
Transmitting Power CC2500 and 4IN1: Max 20dBm
Transmitting Power ExpressLRS: Max 30dBm (international) / Max 20dBm (EU LBT)
Cooling fan: Built-in (ELRS version)
Voltage Range: 6.6-8.4V DC
Radio Firmware: EdgeTX (Transmitter) / Multi-Module (RF module) / ELRS
Channels: Max 16 channels (Receiver dependent)
Battery: 7.4V 2-cell Lithium-Polymer / Two 3.7V 18650 Lithium-Ion cells (batteries not included)
Display: 128x64 Monochrome LCD display
Gimbal: High precision 4.0 Hall gimbals as standard (AG01 Optional)
External module: JR/FrSKY/Crossfire compatible
Upgrade Method: USB/SD card &amp EdgeTX Companion PC software

Includes

1x RadioMaster Boxer Radio
1x Signature Carry Case
1x T Antenna
1x USB-C Cable
1x Gimbal Protector
1x 1.5mm Allen Key
2x M4x4 Screws
4x Low Tension Springs
1x 18650 Battery Tray
1x Stickers
1x Manual

Download

Boxer Radio User Manual

 

RaceDayQuads

The perfect combination of size and ergonomics make the Boxer an ideal choice for pilots on the go. Featuring full-size hall gimbals for precision control and an intuitive button layout, the Boxer gives you a compact radio without compromising on comfort and function. This version comes with a transparent case and a bonus white LED kit for your gimbles, a great combo for a classy looking transmitter. 
Features

Transparent case
LED gimbal lights kit included (not installed)
Elevate your control
ExpressLRS 30dBm/1W max
Max F-1000 Refresh rate
Preinstalled with EDGETX firmware
Compact design with excellent ergonomics
Full sized V4.0 hall effect gimbles
Radiomaster standardized button layout
Space for a 2S 6500mAH pack, literally fly all day! 



Specifications


Item: Boxer Radio
Size: 235x178x77
Weight: 532.5g
Frequency: 2.400GHz - 2.480GHz
Internal RF: ELRS 2.4GHz
Supported protocols: Module dependent
Transmitter Power: Express: Max 30dBm (International) / 20dBm (EU LBT)
Cooling fan: Built in
Voltage Range: 6.6-8.4V DC
Radio Firmware: EdgeTX (Transmitter) / ELRS (RF module)
Channels: Max 16 channels (Receiver dependent)
Battery: 7.4V 2-Cell Lithium Polymer / Two 3.7V 18650 Lithium-Ion cells (Battery not included)
Display: 128x64 Monochrome LCD display
Gimbal: High precision 4.0 Hall gimbals as standard
Upgrade Method: USB / SD card &amp EdgeTX Companion PC software
Bonus: White gimbal LED set included for optional installation

Includes

1x RadioMaster Boxer EdgeTX RC Transmitter - ExpressLRS 2.4GHz (Transparent)
1x Signature carry case
1x T antenna
1x USB-C cable
1x Gimble protector
1x 1.5mm Allen key
2x M4x4 Screws
4x Low tension springs
1x Stickers
1x Manuals
1x White gimbal LED set
1x 18650 battery tray 


Merchant	Part Name	Availability	Price
GetFPV	RadioMaster Boxer Radio Transmitter - 4-in-1 Multi-Protocol/CC2500/ELRS 2.4GHz	In Stock	$99.99	Buy
GetFPV	RadioMaster Boxer Radio Transmitter w/ LEDs - ELRS 2.4GHz M2 (Transparent)	In Stock	$159.99	Buy
RaceDayQuads	RadioMaster Boxer EdgeTX RC Transmitter - Choose Version	In Stock	$139.99	Buy
RaceDayQuads	RadioMaster Boxer EdgeTX RC Transmitter - ELRS 2.4GHz - Transparent	Out Of Stock	$159.99	Buy
WREKD	RadioMaster Boxer EdgeTX RC Transmitter - ELRS 2.4GHz - Transparent	Out Of Stock	$159.99	Buy
WREKD	RadioMaster Boxer EdgeTX RC Transmitter - Choose Version	Out Of Stock	$139.99	Buy
Five33	RADIOMASTER BOXER EDGETX RC RADIO TRANSMITTER - ELRS	In Stock	$139.99	Buy
Five33	RadioMaster Boxer EdgeTX RC Transmitter - ELRS 2.4GHz - Transparent	Out Of Stock	$159.99	Buy
Five33	RADIOMASTER BOXER EDGETX RC RADIO TRANSMITTER TRANSPARENT VERSION - ELRS	In Stock	$159.99	Buy
Five33	RadioMaster Boxer EdgeTX RC Transmitter - Choose Version	Out Of Stock	$139.99	Buy
PyroDrone	RadioMaster Boxer EdgeTX RC Radio Transmitter - Choose Version	In Stock	$139.99	Buy
PyroDrone	RadioMaster Boxer EdgeTX RC Radio Transmitter Transparent Version - ELRS	In Stock	$159.99	Buy
Rotor Riot	Boxer EdgeTX Radio Controller - 4in1 or ELRS	In Stock	$139.99	Buy
Ready Made RC	RadioMaster Boxer Transmitter 4-in-1 Radio Controller	In Stock	$139.99	Buy
Ready Made RC	RadioMaster Boxer Radio Control System ExpressLRS (ELRS 2.4G)	In Stock	$139.99	Buy

RadioMaster Boxer EdgeTX Radio Transmitter

More Radio Transmitters and Modules

DJI Digital FPV Remote Controller

EMAX E6 Transmitter Radio Controller - FrSky

TBS Tracer Micro TX

RadioMaster Boxer EdgeTX Radio Transmitter