FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Camera Butter

Camera Butter ND Filter Multipack for DJI FPV System

Make the best FPV system ever better! High-quality Neutral Density filter and Circular polarizing filter made to fit the DJI FPV System (NOT the DJI FPV Drone!).

HD Camera Accessory Type

HD Camera Accessories

Camera Butter GEPRC Naked Hero 8 ND Filter/Lens Adapter 

This adapter gives you the ability to use super high-quality Camera Butter filters and lens protectors on your GepRC Naked Hero 8!

GEPRC

GEPRC Naked GoPro Hero 8 Case w/ BEC & ND Filter

GEPRC designed a case, BEC board, and ND16 filter for the&nbspNaked GoPro Hero 8 Camera.

GEPRC designed a case, BEC board, and ND16 filter for the Naked GoPro Hero 8 Camera.

GEPRC Naked GoPro Hero 8 Case + BEC Board

GEPRC Naked GoPro Hero 8 BEC Board V1.0

The GEPRC team has specially designed a new&nbspBEC Board&nbspfor the&nbspNaked GoPro Hero 8, which supports 2S-6S voltage input and 5V@2A stable output. It perfectly matches the GoPro Hero 8 motherboard and is easy to install. Save weight with your own naked GoPro and BEC!

The GEPRC team has specially designed a new BEC Board for the Naked GoPro Hero 8, which supports 2S-6S voltage input and 5V@2A stable output. It perfectly matches the GoPro Hero 8 motherboard and is easy to install. Save weight with yo

GEPRC Naked GoPro Hero 8 BEC Board - V1.0

Camera Butter GoPro Hero 8 Glass Lens

Replacement lens kit for the GoPro Hero 8.  Yes, really! Made from ultra-strong Corning Gorilla glass, These are a direct replacement for the Hero 8 glass lens on the front of the GoPro.  If you have broken or scratched your Hero 8 lens, this is for you.  Includes a tool to help remove the old lens and pre-applied ultr

Camera Butter GoPro Hero 8 Glass Lens Replacement Kit

Replacement lens kit for the GoPro Hero 8 Black (will not work on other models). 
Yes, really!  Get them while they are still available.
Made from ultra-strong Corning Gorilla glass, These are a direct replacement for the Hero 8 glass lens on the front of the GoPro.  If you have broken or scratched your Hero 8 lens, this is for you.  Includes a tool to help remove the old lens and pre-applied ultra strong adhesive to keep it on.
It&#39s a super simple swap that just takes a few minutes, and it comes with everything you need, except a heat gun or hair dryer:

Replacement lens
Pre-applied adhesive
Tool to remove the old lens

You supply the heat gun.  A hair dryer will also work (you just need to use it very close)
Note that replacing the lens may void your warranty, and could reduce water resistance of the camera especially if not installed correctly.
Full instructions here.


Replacement lens kit for the GoPro Hero 8 Black (will not work on other models).  Yes, really!  Get them while they are still available. Made from ultra-strong Corning Gorilla glass, These are a direct replacement for the Hero 8 glass lens on the front of the GoPro.  If you have broken or scratched your Hero 8 lens, th

Camera Butter GoPro Hero 8 Glass Lens Replacement Kit from WREKD Co.

If you have a broken or scratched Hero 8 lens, then this is for you! Includes a tool to help remove the old lens and pre-applied on the front of the GoPro Hero 8. 

Camera Butter Black Diamond Universal ND Filter for TBS Jello Guard (ND4/8/16/32)

Same premium quality as other Camera Butter ND filters, and fit in any slip-in filter mount designed for the TBS Jello Guard! The STRONGEST and toughest ND filter available anywhere, made out of super tough Gorilla glass!   They also act as a lens protector - you cannot buy a stronger lens protector for your GoPro. We 

Camera Butter Black Diamond Universal ND filter (fits TBS jello guard mounts) - Choose Density

The Black Diamond ND Filter gives you that buttery smooth HD footage by allowing the optimal amount of light into your GoPro Hero camera.

BetaFPV

BetaFPV GoPro Lite BEC for GoPro Hero 6/7 Action Camera

BETAFPV

Are you worried that your GoPro will turn off during a flight? BETAFPV has designed a Bec Board to help you with that and much more! The GoPro BEC Board has integrated 5V@2A BEC, stock GoPro buttons, and LED pluggable connectors and remote recording!

BETAFPV GoPro BEC Board for GoPro Hero

The BETAFPV Case V2 for Naked Camera is an upgraded new version with an injection molding process for easier installation. Comes with a BEC board.

BETAFPV Naked Camera V2 Case (Injection Molded) + BEC Combo 

Are you still worried about naked GoPro turning off because lack of power? Do you want to make your naked GoPro to be super neat and light? This BEC board could help you. It has integrated 5V@2A BEC, stock GoPro buttons and LED, pluggable connectors and remote recording. Special thanks to Guido Fabbrini reminding us of

BETAFPV BEC Board for GoPro Hero 6/7

You asked, we listen! To provide more choice for our customers, not only the BEC board for HERO6/7, BETAFPV also designed a new BEC board for GoPro HERO8. You don't need to worry your GoPro will turn off during a flight anymore. This BEC board only weighs about 1.5g, which makes your naked GoPro super neat and light. This BEC Board has integrated 5V@2A BEC, stock GoPro buttons, and LED pluggable connectors and remote recording!
Noticed: The BEC board for HERO8 does not fit the Case V2, but we have provided the STL file for Naked GoPro HERO8 Case, feel free to download it.  Many thanks for Richárd Papp and those people who devoted their time and energy to the cinewhoop researching. Thanks for the FPV community to gather such awesome ideas. If you wanna know more about cinewhoop, click the link below to join us on Facebook. &gt&gtNAKED Cinewhoop Community
Bullet point

BEC Board is specially designed for Naked GoPro HERO6/7/8 which weighs about 1.5g, makes your naked GoPro lighter and easy to install on your drone.
The BEC output voltage is 5V@2A, avoid the accident of power of which is caused by the insufficient power supply for the FC board. Also, stock buttons and LEDs are integrated.
Integrated GoPro stock buttons, Power/Mode Button and Record Button.
Integrated GoPro stock LED to know the status of the camera.
The pad is available for pilots to control the GoPro recording via the radio transmitter.
With the pluggable connector, which is easier to connect with your flight controller for power supply and recording.

Specification




Item: BEC Board for Naked Camera

Weight: 1.53g/1.57g
Output: 5V @ 2A
Input voltage: 2-4S 
Connector: GH 1.25 3P connector



 BEC Board Diagram



The two buttons on the BEC board have the same functions as the GoPro spare buttons. Three actions we will use frequently.

Power on-Press the power/mode button, the LED flashes three times and goes out. 
Start recording-Press the "Record" button once and the LED flashes slowly. If the LED flashes once and goes off, it means there is no SD card. 
Stop recording-Press the "Record" button, the LED stops blinking slowly.

BEC Board for GoPro HERO6/7



BEC Board for GoPro HERO8


LED Status 
Under normal operation, plug the GH1.25 connector into the GoPro Lite camera firstly, then connect with the battery. The LED will flash once, then you should press the Power/Mode button once in a second to power on. The LED on the BEC board has the same status as the stock LED on the GoPro mainboard.





Indication


Button Operation


LED Status




Power On


Press the Power/Mode button once


Flash 3 times and light off




Power Off


Press the Power/Mode button for 5 seconds


Flash 7 times and light off




Start Record


Press the record button once


Continuously slow flash




Stop Record


Press the record button once


Flash 3 times and light off




Mode Switch


Press the Power/Mode button once


Check the mode on LCD Display






How to Setup Remote Record

The pilot could use the switch on the radio transmitter to start/stop the record. Some more configuration needed.
For example, if you use F4 FC V2.0 in the drone, like the 95X whoop drone, the connection diagram is shown below. The yellow cable (FC B12 pin pad) is just for the remote record.

We use the Pinio function in Betaflight to control the record. First, setup the Pinio function of the B12 pin in the FC board.
resource FLASH_CS 1 NONEresource PINIO 1 B12set pinio_box = 40,255,255,255save
Next, map one of the switch channels in your radio transmitter to this Pinio (aka USER1). As shown below, we map the AUX4 channel in the radio transmitter to USER1 Pinio. The cursor in the orange zone means button released and the white zone means pressed. So keep the cursor in the orange zone in default.

Third, check if the Pinio function works. Change the switch and make the cursor move from the orange zone to the white zone, and finally back to the orange zone. Now you could check the LED status to know if the record starts. Use the same process to stop recording.
If you use the 12A F4 AIO FC board, like the 85X whoop drone, you will use the LED_STRIP pin (aka A08 pin pad) for the Pinio function.

resource LED_STRIP 1 NONEresource PINIO 1 A08set pinio_box = 40,255,255,255save
Know more about the Betaflight Pinio function.
Parts of Naked Camera Series

We know some of the pilots might have a question about how to get the case for the naked camera or some might wanna grab the naked Camera directly. Here we provide some more choices for your better installation.

Beta95X for Naked Camera
Beta85X for Naked Camera
BEC Board for Naked Camera
Case for Naked Camera
Customized Naked Camera

How to Disassemble GoPro HERO6/8 Black
Special thanks to JONAH BLAESER who provided the method of disassembling GoPro HERO6/8 Black. If you are interested, please check the link to know the specific steps to make your own naked GoPro. 
GoPro HERO6 Black Disassembly Guide
We also provided the method of disassembling GoPro HERO8 Black. If you are interested, please check the link.
GoPro HERO8 Black Disassembly Guide
Note: Do this at your own risk. You will lose your GoPro’s warranty and you may end up bricking the camera if something goes wrong. This guide is not authorized by GoPro and your camera is not guaranteed to work afterward. BETAFPV will not be held responsible for this action.
How to assemble the BEC Board on Naked Camera.


FAQ


STL file for Naked GoPro HERO8 Case

STL File for Naked Camera Series (Only suit for HERO6/7)

How to assemble the case with the Naked Camera

Package


1 * BEC Board for GoPro HERO6/7

1 * GH1.25 Power Cable (90mm 30AWG)




or

1 * BEC Board for GoPro HERO8

1 * GH1.25 Power Cable (90mm 30AWG)

3 * M1.4*4 Screws




Are you still worried that the bare GoPro will shut down due to an unstable power supply? Do you want to make the naked GoPro super neat and light? This BEC board can help you. It integrates 5V @ 2A BEC, spare GoPro buttons and LEDs, pluggable connectors and remote recording. The BEC board has been upgraded to version V1.1. For the new version, when assembling the BEC board on the GoPro motherboard, we do not need to use 2 spacers, which can solve the problem that the two interfaces may be loose when locked. We did find this problem in the BETA TEST version, that is, plugging in the 3-pin power cord when the power is turned on may cause the FC or GoPro motherboard to burn out. Special thanks to Guido Fabbrini Remind us of this risk. After a lot of testing and troubleshooting, we have completely solved the problem before the release of BEC board V1.0. Therefore, please don’t worry if you have received the V1.0 version, the V1.0 version is completely safe. This BEC board is suitable for GoPro HERO6 and HERO7 Black. But it does not apply to HERO8 and HERO5.

BEC Board for Naked Camera

BetaFPV GoPro Lite Case V2 for Naked GoPro

The BETAFPV Case V2 for Naked Camera is an upgraded new version with an injection molding process for easier installation.

BETAFPV Naked Camera V2 Case (Injection Molded)

Disassemble at your own risk, we are not responsible for any damage to your camera!
Plastic injection molded GoPro Lite case from BetaFPV. BEC board is optional and also has an adapter for the BetaFPV ND16 Filter for GoPro Lite
This case and BEC board fit the GoPro HERO6 and GoPro HERO7 Black. But NOT for GoPro HERO8.
Check out all our replacement cam parts &amp accessories and all our BetaFPV selection! 
Features

Plastic injection molded, 
Easy assembly
Lightweight

Specifications


Weight: 6.57g
Output: 5V@2A
Voltage: 2-4S

Includes

1x BetaFPV GoPro Lite Case V2 for Naked GoPro
1x  BEC Board 

Instructions for Assembly
How to Assemble

Step 1: Assemble the BEC board on the GoPro motherboard.
Step 2: Hold the camera lens and the camera board at the same time, be careful when you assemble the board on the case.
Step 3, 4: Screw the GoPro motherboard with the M1.4*5 and M1.4*8screws as shown below
Step 5: Install the light pipe as shown below.
Step 6: Install the back case, and screw the board with M1.4*8 screws as shown below.


How to Disassemble GoPro HERO6 Black
Special thanks to JONAH BLAESER who provided the method of disassembling GoPro HERO6 Black. If you are interested, please check the link to know the specific steps to make your own naked GoPro. 
GoPro HERO6 Black Disassembly Guide 
We also provided the method of disassembling GoPro HERO8 Black. If you are interested, please check the link.
GoPro HERO8 Black Disassembly Guide
Note: Do this at your own risk. You will lose your GoPro’s warranty and you may end up bricking the camera if something goes wrong. This guide is not authorized by GoPro and your camera is not guaranteed to work afterward. 

Disassemble at your own risk, we are not responsible for any damage to your camera! Plastic injection molded GoPro Lite case from BetaFPV. BEC board is optional and also has an adapter for the BetaFPV ND16 Filter for GoPro Lite This case and BEC board fit the GoPro HERO6 and GoPro HERO7 Black. But NOT for GoPro HERO8. 

BetaFPV GoPro Lite Case V2 for Naked GoPro Hero 6-7 Black - Optional BEC Board

BetaFPV GoPro Lite Case V2 for Naked GoPro Hero 6-7 Black - Optional B

Case V2 for Naked Camera is upgraded with a new injection molding process and easier installation. Upgraded a better appearance design, it is more beautiful and clean. It is provided two different versions, more choice for different needed. If you already have has a GoPro HERO6/7, this is the best choice to make your n

BetaFPV GoPro Lite Case V2 - Case Only

Disassemble at your own risk, we are not responsible for any damage to your camera!
Plastic injection molded GoPro Lite case from BetaFPV. BEC board is optional and also has an adapter for the BetaFPV ND16 Filter for GoPro Lite
This case and BEC board fit the GoPro HERO6 and GoPro HERO7 Black. But NOT for GoPro HERO8.
Check out all our replacement cam parts &ampamp accessories and all our BetaFPV selection! 
Features

Plastic injection molded, 
Easy assembly
Lightweight

Specifications


Weight: 6.57g
Output: 5V@2A
Voltage: 2-4S

Includes

1x BetaFPV GoPro Lite Case V2 for Naked GoPro
1x  BEC Board 

Instructions for Assembly
How to Assemble

Step 1: Assemble the BEC board on the GoPro motherboard.
Step 2: Hold the camera lens and the camera board at the same time, be careful when you assemble the board on the case.
Step 3, 4: Screw the GoPro motherboard with the M1.4*5 and M1.4*8screws as shown below
Step 5: Install the light pipe as shown below.
Step 6: Install the back case, and screw the board with M1.4*8 screws as shown below.


How to Disassemble GoPro HERO6 Black
Special thanks to JONAH BLAESER who provided the method of disassembling GoPro HERO6 Black. If you are interested, please check the link to know the specific steps to make your own naked GoPro. 
GoPro HERO6 Black Disassembly Guide 
We also provided the method of disassembling GoPro HERO8 Black. If you are interested, please check the link.
GoPro HERO8 Black Disassembly Guide
Note: Do this at your own risk. You will lose your GoPro’s warranty and you may end up bricking the camera if something goes wrong. This guide is not authorized by GoPro and your camera is not guaranteed to work afterward. 

BetaFPV GoPro Lite Case V2 for Naked GoPro Hero 6-7 Black - Optional BEC Board from WREKD Co.

BETAFPV has designed a case to fit the GoPro Lite Camera. If you already have has a GoPro HERO 6/7, this is the great choice to mount your GoPro and protected it from a crash. Lightweight and easy to use. Comes with a BEC board.

BETAFPV Case for GoPro Lite Camera

Camera Butter Ultimate GoPro Hero 5/6/7/8 Rear LCD Screen Protector

Protect the rear LCD screen display on your GoPro Hero 5,6,7 or 8 with the strongest LCD protector available - the ULTIMATE GoPro Hero LCD screen protector by Camera Butter.

Camera Butter Shield Lens Protector - GoPro Hero 8/9

Whether you are using them for FPV drones, mountain biking footage or other action videos, your lens will be all that much safer using a Camera Butter Lens Shield!

Camera Butter Shield Lens Protector  - GoPro Hero 5/6/7

The strongest Lens protector you can get! Premium quality, super strong lens protector made from top quality optical glass. 1mm thick, tempered glass gives you the best protection you can get for your GoPro. Most other lens protectors are only 0.3mm thick - these ones are over 3 times as thick. They use the same innova

Camera Butter Stick On Reusable Lens Shield - For GoPro 5/6/7

Camera Butter Shield Lens Protector - GoPro Session 4/5 

The strongest Lens protector you can get! Premium quality, super strong lens protector made from top quality optical glass.   1mm thick, tempered glass gives you the best protection you can get for your GoPro.   Most other lens protectors are only 0.3mm thick - these ones are over 3 times as thick. They use the same in

Camera Butter Lens Shield Re-Usable Lens Protector (Session 4/5)

Camera Butter Stick On Reusable Glass ND Filter for GoPro Hero 8/9 - ND4/8/16/32

Premium quality ND Filter for GoPro Hero 8  and GoPro Hero 9.   Available in ND4, 8, 16 and 32.  Also available in 3-piece multipacks: ND4, 8 and 16 or ND8, 16 and 32.  Producer pack (see below) is also available.
(These are not for the Hero 10/11 - Hero 9 /10/11 twist-on filters are available here: GoPro Hero 9, Hero 10, Hero 11 screw-on ND filters.)
Super high quality, stick-on neutral density filter for GoPro Hero 8 and Hero 9 made from top quality optical glass.  It uses a unique peel-and stick backing that you can remove and re-apply over and over. If the adhesive gets dirty, you can simply wash it with water to rejuvenate it!  The adhesive only covers the edges of the glass so it does not impede the crystal-clear quality.
Unlike other ND filters for the GoPro Hero 8/9, these do not need a special bracket or mount.
High quality, 1mm thick hardened glass that is nano-coated for:

anti-scratch
repels water
repels fingerprints
anti-reflection

Because it attaches directly to the lens, it fits almost all mounts.
Whether you are using the ND filter for FPV drones, mountain biking footage or other action video, this will give you that smooth as silk, cinematic motion and reduce or eliminate jello.
ND transmission:

ND4 (ND 0.6) 25% transmission  (cloudy, overcast)
ND8 (ND 0.9) 12.5% transmission (some sunlight)
ND16 (ND 1.2) 6.25% transmission (bright sunlight)
ND32 (ND 1.5) 3.125% transmission (very bright sunlight

The Producer pack contains:

1 x ND4
2 x ND8
2 x ND 16
1 x ND32
1 x Lens shield (for protection when not using a filter)
3-Pack of replacement adhesives


Premium quality ND Filter for GoPro Hero 8  and GoPro Hero 9.   Available in ND4, 8, 16 and 32.  Also available in 3-piece multipacks: ND4, 8 and 16 or ND8, 16 and 32.  Producer pack (see below) is also available. (These are not for the Hero 10/11 - Hero 9 /10/11 twist-on filters are available here: GoPro Hero 9, Hero 

Camera Butter Stick On Reusable Glass ND Filter for GoPro Hero 8/9 - ND4/8/16/32 from WREKD Co.

CAMERABUTTER

High quality, stick-on neutral density filter for Gopro Hero 8 &amp 9 made from top quality optical glass.  It uses a unique peel-and stick backing that you can remove and re-apply over and over. If the adhesive gets dirty, you can simply wash it with water to rejuvenate it!  The adhesive only covers the edges of the filter so it does not impede the crystal-clear image.Whether you are using the ND filter for FPV drones, mountain biking footage or other action video, this will give you that smooth as silk, cinematic motion and reduce or eliminate jello.We also carry Camera Butter ND Filters for GoPro Hero 5/6/7 and Session 4/5!
Check out all our replacement cam parts &amp accessories and all our Camera Butter products
Features

High Quality, 1mm Thick Hardened Glass
Nano-Coated (Anti-Scratch, Repels Water &amp Fingerprints)
Anti-Glare
Reusable, washable, re-stickable adhesive boarder

Specifications
ND transmission (Choose Above)

ND4 (ND 0.6) 25% transmission  (cloudy, overcast)
ND8 (ND 0.9) 12.5% transmission (some sunlight)
ND16 (ND 1.2) 6.25% transmission (bright sunlight)
ND32 (ND 1.5) 3.125% transmission (very bright sunlight)

Includes

1x Camera Butter ND Filter for GoPro Hero 8/9


High quality, stick-on neutral density filter for Gopro Hero 8 &amp; 9 made from top quality optical glass.  It uses a unique peel-and stick backing that you can remove and re-apply over and over. If the adhesive gets dirty, you can simply wash it with water to rejuvenate it!  The adhesive only covers the edges of the 

Camera Butter Stick On Reusable Glass ND Filter for GoPro Hero 8/9 - N

Camera Butter ND Filters gives you that buttery smooth HD footage by allowing the optimal amount of light into your GoPro Hero camera.

Camera Butter Glass ND Filter for GoPro Hero 8/9 (ND4/8/16/32)

GoPro Hero 9/8 ND filter.   Available in ND4, 8, 16 and 32. High quality, stick-on neutral density filter for GoPro Hero 8/9 made from top quality optical glass.  It uses a unique peel-and stick backing that you can remove and re-apply over and over. If the adhesive gets dirty, you can simply wash it with water to reju

Camera Butter Glass ND Filter for GoPro Hero 8/9 - (Choose Density)

TBS ND4 Filter for GoPro

Team BlackSheep

TBS Glass ND Filter (ND4) lens is produced from high-quality neodymium treated glass.

TBS Glass ND Filter (ND4)

TBS ND Filter for GoPro Check out all of our ND Filters and the rest of our TBS products! Features: The lens is cut using industrial strength lasers. The result is a clean and extremely sharp finish absent of "Micro-scratches". (The tiny spots on your window.) Our lens is produced from high-quality neodymium treated gl

Camera Butter Stick On Reusable Glass ND Filter for GoPro Hero 5/6/7 - ND4/8/16/32

High quality, stick-on neutral density filter for Gopro Session 4/5 made from top quality optical glass.  It uses a unique peel-and stick backing that you can remove and re-apply over and over. If the adhesive gets dirty, you can simply wash it with water to rejuvenate it!  The adhesive only covers the edges of the filter so it does not impede the crystal-clear image.Whether you are using the ND filter for FPV drones, mountain biking footage or other action video, this will give you that smooth as silk, cinematic motion and reduce or eliminate jello.We also carry Camera Butter ND Filters for GoPro Session 4/5!
Check out all our replacement cam parts &amp accessories and all our Camera Butter products
Features

High Quality, 1mm Thick Hardened Glass
Nano-Coated (Anti-Scratch, Repels Water &amp Fingerprints)
Anti-Glare
Reusable, washable, re-stickable adhesive boarder

Specifications
ND transmission (Choose Above)

ND4 (ND 0.6) 25% transmission  (cloudy, overcast)
ND8 (ND 0.9) 12.5% transmission (some sunlight)
ND16 (ND 1.2) 6.25% transmission (bright sunlight)
ND32 (ND 1.5) 3.125% transmission (very bright sunlight)

Includes

1x Camera Butter ND Filter for GoPro Hero 5/6/7


High quality, stick-on neutral density filter for Gopro Session 4/5 made from top quality optical glass.  It uses a unique peel-and stick backing that you can remove and re-apply over and over. If the adhesive gets dirty, you can simply wash it with water to rejuvenate it!  The adhesive only covers the edges of the fil

Camera Butter Stick On Reusable Glass ND Filter for GoPro Hero 5/6/7 -

Camera Butter Glass ND Filter for GoPro Hero 5/6/7 (ND4/8/16/32)

Premium quality ND filter for GoPro Hero 5, 6 and 7.   Available in ND4, 8, 16, 32 and 64.  Also available in 3-piece multipacks: ND4,8 and 16 or ND8, 16 and 32.  Producer pack (see below) is also available.
Super high quality, stick-on neutral density filter for GoPro Hero 5/6/7 made from top quality optical glass.  It uses a unique peel-and stick backing that you can remove and re-apply over and over. If the adhesive gets dirty, you can simply wash it with water to rejuvenate it!  The adhesive only covers the edges of the glass so it does not impede the crystal-clear quality.
High quality, 1mm thick hardened glass that is nano-coated for:

anti-scratch
repels water
repels fingerprints
anti-glare

Whether you are using the ND filter for FPV drones, mountain biking footage or other action video, this will give you that smooth as silk, cinematic motion and reduce or eliminate jello.
ND transmission:

ND4 (ND 0.6) 25% transmission  (cloudy, overcast)
ND8 (ND 0.9) 12.5% transmission (some sunlight)
ND16 (ND 1.2) 6.25% transmission (bright sunlight)
ND32 (ND 1.5) 3.125% transmission (very bright sunlight)
ND64 (ND 1.8) 1.563% transmission  (EXTREME bright sunlight)

The Producer pack contains:

1 x ND4
2 x ND8
2 x ND 16
1 x ND32
1 x Lens shield (for protection when not using a filter)
3-Pack of replacement adhesives


Premium quality ND filter for GoPro Hero 5, 6 and 7.   Available in ND4, 8, 16, 32 and 64.  Also available in 3-piece multipacks: ND4,8 and 16 or ND8, 16 and 32.  Producer pack (see below) is also available. Super high quality, stick-on neutral density filter for GoPro Hero 5/6/7 made from top quality optical glass.  I

Camera Butter Stick On Reusable Glass ND Filter for GoPro Hero 5/6/7 - ND4/8/16/32 from WREKD Co.

High quality, stick-on neutral density filter for GoPro Hero 5/6/7 made from top quality optical glass.  It uses a unique peel-and stick backing that you can remove and re-apply over and over. If the adhesive gets dirty, you can simply wash it with water to rejuvenate it!  The adhesive only covers the edges of the glas

Camera Butter Glass ND filter for GoPro Hero 5/6/7 (Choose Density)

Ethix

Ethix Tempered ND32 for GoPro 6 & 7

This filter is a combination of high-quality tempered glass and a neutral density filter (ND4). 

Ethix Tempered ND32 Filter for GoPro 7 & 6

Ethix Tempered ND32 Filter for GoPro 7 &amp 6

Check out all of our ND Filters and the rest of our Ethix products! Finally, after over a year of spitballing the idea of a stick-on tempered glass screen protector THE WAIT IS OVER! We present to you the ultimate combination of performance and protection. This filter is a combination of a high quality tempered glass a

ETHIX Tempered ND32 for GoPro 6 & 7

Camera Butter Stick On Reusable Glass ND Filter for GoPro Session 4/5 - ND4/8/16/32

High quality, stick-on neutral density filter for Gopro Session 4/5 made from top quality optical glass.  It uses a unique peel-and stick backing that you can remove and re-apply over and over. If the adhesive gets dirty, you can simply wash it with water to rejuvenate it!  The adhesive only covers the edges of the filter so it does not impede the crystal-clear image.Whether you are using the ND filter for FPV drones, mountain biking footage or other action video, this will give you that smooth as silk, cinematic motion and reduce or eliminate jello.Check out all our replacement cam parts &amp accessories and all our Camera Butter products
Features

High Quality, 1mm Thick Hardened Glass
Nano-Coated (Anti-Scratch, Repels Water &amp Fingerprints)
Anti-Glare
Reusable, washable, re-stickable adhesive boarder

Specifications
ND transmission (Choose Above)

ND8 (ND 0.9) 12.5% transmission (some sunlight)

ND16 (ND 1.2) 6.25% transmission (bright sunlight)
ND32 (ND 1.5) 3.125% transmission (very bright sunlight)

Includes

1x Camera Butter ND Filter for GoPro Session 4/5


The Camera Butter Stick On Reusable Glass ND Filter for GoPro Session 4/5 comes in ND4, 8, 16, and 32 options. Make your videos clearer than ever today!

Camera Butter Stick On Reusable Glass ND Filter for GoPro Session 4/5 - ND8/16/32

Camera Butter Stick On Reusable Glass ND Filter for GoPro Session 4/5 for Sale

Camera Butter ND Filters gives you that buttery smooth HD footage by allowing the optimal amount of light into your Session camera.

Camera Butter Glass ND Filter for Session 4/5 V2 (ND4/8/16/32)

High quality, stick-on neutral density filter for Gopro Session 4/5.  It uses a unique peel-and stick backing that you can remove and re-apply over and over. If the adhesive gets dirty, you can simply wash it with water to rejuvenate it! Checkout all our ND Filters and our entire Camera Butter Collection! High quality,

Camera Butter Glass ND filter for GoPro Session 4/5 V2 (Choose Density)

DJI Avata 2 ND Filters Set - ND8/16/32

Pre-Orders shipping ASAP!
DJI Avata 2 ND Filters SetComes with ND 8/16/32 filters to tackle various lighting conditions, ensuring appropriate brightness and contrast, giving your work high-quality results.
Check out all our replacement cam parts &amp accessories and all of our DJI products!
Includes

1x DJI AVATA 2 ND Filters Set - ND8/16/32


Pre-Orders shipping ASAP! DJI Avata 2 ND Filters SetComes with ND 8/16/32 filters to tackle various lighting conditions, ensuring appropriate brightness and contrast, giving your work high-quality results. Check out all our replacement cam parts &amp; accessories and all of our DJI products! Includes 1x DJI AVATA 2 ND 

(PRE-ORDER) DJI AVATA 2 ND Filters Set - ND8/16/32

Camera Butter Filter for DJI O3 Air Unit Camera - UV

The Camera Butter ND Filter Two Pack for the DJI O3 Air Unit Camera helps you get better footage while protecting your camera. This two-pack includes UV/protection ND filters featuring Corning Gorilla Glass for high strength durability.  These ND filters come with two clip-in slots for a secure connection to your O3 camera. The aluminum frame of the filter is carefully contoured to reduce sharp edges to reduce the wear on your camera. 
Check out other DJI O3 Products! 
Check out all our replacement cam parts &amp accessories and all our Camera Butter products!



Clear UV Filter: Protects your camera lens from dust, dirt, and scratches

Pro quality optics and Made for Action
Made from incredibly strong Corning Gorilla Glass and ultra premium ND coatings, these ND filters for the DJI O3 air unit will reduce jello caused by vibrations, smooth out your video, minimize your props in view and give you cinema-style, extra smooth motion blur.
Made specifically for the DJI O3 air unit
Unlike filters that are primarily made for the Avata,  the Camera Butter O3 filters and lens protectors are specially made for the O3 unit and the FPV use case. This means:

They fit tighter and stay on better than other filters
They are made to fit into a narrower space
They have little "wings" on the top and bottom to make them easier to remove
You can turn them 90 degrees and use the horizontally for extra space on the top and bottom
They are much tougher than other filters made from regular glass

Protect your lens
Both the ND filters and clear lens protectors are the only ones made from ultra-strong Gorilla glass, meaning that they can take a hit much better than other filters.  Now you don't have to give up protection if you want to use an ND filter - the ND filters are just as strong.  These filters are truly made for action!
Get the very best out of your O3 and protect your camera better than any other filter available!
Easier on your camera
Due to the design of the O3 camera, continually inserting and removing filters can eventually wear away the plastic, which can mean a looser fit over time.  Unlike other O3 filters (even ones that look almost exactly the same!), the aluminum frame on this filter is carefully contoured to reduce sharp edges to reduce the wear on your camera.  This is a labor-intensive process, but significantly decreases damage to your expensive camera.

These filters also act as a lens protector that can protect your camera lens when your drone has a severe crash. The UV filter can protect your lens while you fly indoors or at dusk, providing pilots with clearer footage.
Includes

1x Camera Butter ND Filter 2 Pack for DJI O3 Air Unit Camera - ND8/16


The Camera Butter ND Filter Two Pack for the DJI O3 Air Unit Camera helps you get better footage while protecting your camera. This two-pack includes UV/protection ND filters featuring Corning Gorilla Glass for high strength durability.  These ND filters come with two clip-in slots for a secure connection to your O3 ca

Camera Butter ND Filter 2 Pack for DJI O3 Air Unit Camera - UV

Camera Butter Filter for DJI O3 Air Unit Camera - ND8, ND16

The Camera Butter ND Filter Two Pack for the DJI O3 Air Unit Camera helps you get better footage while protecting your camera. This two-pack includes ND8, and ND16, filters featuring Corning Gorilla Glass for high strength durability.  These ND filters come with two clip-in slots for a secure connection to your O3 camera. The aluminum frame of the filter is carefully contoured to reduce sharp edges to reduce the wear on your camera. 
Check out other DJI O3 Products! 
Check out all our replacement cam parts &amp accessories and all our Camera Butter products!


ND8 Filter: Perfect for cloudy days or early morning/late afternoon sunlight

ND16 Filter: Suitable for use on bright, sunny days

Pro quality optics and Made for Action
Made from incredibly strong Corning Gorilla Glass and ultra premium ND coatings, these ND filters for the DJI O3 air unit will reduce jello caused by vibrations, smooth out your video, minimize your props in view and give you cinema-style, extra smooth motion blur.
Made specifically for the DJI O3 air unit
Unlike filters that are primarily made for the Avata,  the Camera Butter O3 filters and lens protectors are specially made for the O3 unit and the FPV use case. This means:

They fit tighter and stay on better than other filters
They are made to fit into a narrower space
They have little "wings" on the top and bottom to make them easier to remove
You can turn them 90 degrees and use the horizontally for extra space on the top and bottom
They are much tougher than other filters made from regular glass

Protect your lens
Both the ND filters and clear lens protectors are the only ones made from ultra-strong Gorilla glass, meaning that they can take a hit much better than other filters.  Now you don't have to give up protection if you want to use an ND filter - the ND filters are just as strong.  These filters are truly made for action!
Get the very best out of your O3 and protect your camera better than any other filter available!
Easier on your camera
Due to the design of the O3 camera, continually inserting and removing filters can eventually wear away the plastic, which can mean a looser fit over time.  Unlike other O3 filters (even ones that look almost exactly the same!), the aluminum frame on thus filter is carefully contoured to reduce sharp edges to reduce the wear on your camera.  This is a labor-intensive process, but significantly decreases damage to your expensive camera.

These filters also act as a lens protector that can protect your camera lens when your drone has a severe crash. The UV filter can protect your lens while you fly indoors or at dusk, providing pilots with clearer footage.
Includes

1x Camera Butter ND Filter 2 Pack for DJI O3 Air Unit Camera - ND8/16


The Camera Butter ND Filter Two Pack for the DJI O3 Air Unit Camera helps you get better footage while protecting your camera. This two-pack includes ND8, and ND16, filters featuring Corning Gorilla Glass for high strength durability.  These ND filters come with two clip-in slots for a secure connection to your O3 came